All-in-one surface methodology for corrosion protection in Metal Additive Manufacturing

Informazioni relative al progetto

SuMAM

ID dell’accordo di sovvenzione: 101066947

DOI

10.3030/101066947

Progetto chiuso

Data della firma CE 9 Agosto 2022

Data di avvio 1 Settembre 2023

Data di completamento 31 Marzo 2026

Finanziato da

• Marie Skłodowska-Curie Actions (MSCA)

Costo totale

Nessun dato

Contributo UE

€ 191 760,00

Coordinato da

VRIJE UNIVERSITEIT BRUSSEL
Belgium

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Data Management Plan (1)

Data Management Plan

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved.

Documents, reports (1)

Communication, Dissemination & Exploitation Plan

The plan describes the planned measures to maximize the impact of the project, including the dissemination and exploitation measures that are planned, and the target group(s) addressed. Regarding communication measures and public engagement strategy, the aim is to inform and reach out to society and show the activities performed, and the use and the benefits the project will have for citizens.

Pubblicazioni

Peer reviewed articles (6)

Corrosion behavior of steel parts repaired using additive manufacturing: Overview and research perspective

Autori: Marina Furbino, Rubén Del Olmo, Reynier I. Revilla, Iris De Graeve
Pubblicato in: Materials & Design, Numero 252, 2025, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/J.MATDES.2025.113769

Layered double hydroxides on additively manufactured Al–Si alloy: Growth mechanism, microstructure and corrosion performance

Autori: Rubén del Olmo, Reynier I. Revilla, Francesco Andreatta, Iris De Graeve
Pubblicato in: Applied Surface Science, Numero 710, 2025, ISSN 0169-4332
Editore: Elsevier BV
DOI: 10.1016/J.APSUSC.2025.163891

Corrosion behaviour of novel Al-Fe-Zr alloy developed for additive manufacturing

Autori: Reynier I. Revilla, Rubén del Olmo, Kitty Baert, Ilya Ostrovsky, Loïc Malet, Stéphane Godet, Iris De Graeve
Pubblicato in: Corrosion Science, Numero 257, 2026, ISSN 0010-938X
Editore: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113292

Role of non-metallic inclusions in the initiation and propagation of corrosion in wire arc additive manufactured low-alloy steel

Autori: Marina Furbino, Rubén Del Olmo, Zhichao Che, Arshad Yazdanpanah, Loïc Malet, Stéphane Godet, Chao Liu, Reynier I. Revilla, Iris De Graeve
Pubblicato in: Corrosion Science, Numero 259, 2026, ISSN 0010-938X
Editore: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113509

Microstructure and corrosion behaviour of 316L stainless steel deposited by laser-based directed energy deposition on wrought material: A post-mortem analysis bringing insights for coating and repair applications

Autori: Meron Desalegn Tuemay, Reynier I. Revilla, Rubén Del Olmo, Zoé Jardon, Michaël Hinderdael, Iris De Graeve
Pubblicato in: Engineering Failure Analysis, Numero 179, 2026, ISSN 1350-6307
Editore: Elsevier BV
DOI: 10.1016/J.ENGFAILANAL.2025.109815

Synergistic effects of etching and electropolishing on additively manufactured Ti-6Al-4V scaffolds for biomedical implants

Autori: Ruben del Olmo, Reynier I. Revilla, Floriane Debuisson, Kitty Baert, Brecht Van Hooreweder, Anne des Rieux, Iris De Graeve, Ana Santos-Coquillat
Pubblicato in: Additive Manufacturing, Numero 116, 2026, ISSN 2214-8604
Editore: Elsevier BV
DOI: 10.1016/J.ADDMA.2026.105083

Other (1)

Data Management Plan

Book chapters (1)

New Trends in the Design of Biomaterials for 3D and 4D Printing

Autori: Rubén del Olmo, Enrique Martínez-Campos, José Javier Relinque, Alberto Gallardo, Juan Rodríguez-Hernández, Endzhe Matykina, Ana Santos-Coquillat
Pubblicato in: Advances in Material Research and Technology, Advances in Biomaterials Research, 2025
Editore: Springer Nature Switzerland
DOI: 10.1007/978-3-031-97481-6_3