Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

All-in-one surface methodology for corrosion protection in Metal Additive Manufacturing

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Data Management Plan (odnośnik otworzy się w nowym oknie)

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved.

Communication, Dissemination & Exploitation Plan (odnośnik otworzy się w nowym oknie)

The plan describes the planned measures to maximize the impact of the project, including the dissemination and exploitation measures that are planned, and the target group(s) addressed. Regarding communication measures and public engagement strategy, the aim is to inform and reach out to society and show the activities performed, and the use and the benefits the project will have for citizens.

Publikacje

Corrosion behavior of steel parts repaired using additive manufacturing: Overview and research perspective (odnośnik otworzy się w nowym oknie)

Autorzy: Marina Furbino, Rubén Del Olmo, Reynier I. Revilla, Iris De Graeve
Opublikowane w: Materials & Design, Numer 252, 2025, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/J.MATDES.2025.113769

Layered double hydroxides on additively manufactured Al–Si alloy: Growth mechanism, microstructure and corrosion performance (odnośnik otworzy się w nowym oknie)

Autorzy: Rubén del Olmo, Reynier I. Revilla, Francesco Andreatta, Iris De Graeve
Opublikowane w: Applied Surface Science, Numer 710, 2025, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/J.APSUSC.2025.163891

Corrosion behaviour of novel Al-Fe-Zr alloy developed for additive manufacturing (odnośnik otworzy się w nowym oknie)

Autorzy: Reynier I. Revilla, Rubén del Olmo, Kitty Baert, Ilya Ostrovsky, Loïc Malet, Stéphane Godet, Iris De Graeve
Opublikowane w: Corrosion Science, Numer 257, 2026, ISSN 0010-938X
Wydawca: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113292

Role of non-metallic inclusions in the initiation and propagation of corrosion in wire arc additive manufactured low-alloy steel (odnośnik otworzy się w nowym oknie)

Autorzy: Marina Furbino, Rubén Del Olmo, Zhichao Che, Arshad Yazdanpanah, Loïc Malet, Stéphane Godet, Chao Liu, Reynier I. Revilla, Iris De Graeve
Opublikowane w: Corrosion Science, Numer 259, 2026, ISSN 0010-938X
Wydawca: Elsevier BV
DOI: 10.1016/J.CORSCI.2025.113509

Microstructure and corrosion behaviour of 316L stainless steel deposited by laser-based directed energy deposition on wrought material: A post-mortem analysis bringing insights for coating and repair applications (odnośnik otworzy się w nowym oknie)

Autorzy: Meron Desalegn Tuemay, Reynier I. Revilla, Rubén Del Olmo, Zoé Jardon, Michaël Hinderdael, Iris De Graeve
Opublikowane w: Engineering Failure Analysis, Numer 179, 2026, ISSN 1350-6307
Wydawca: Elsevier BV
DOI: 10.1016/J.ENGFAILANAL.2025.109815

Synergistic effects of etching and electropolishing on additively manufactured Ti-6Al-4V scaffolds for biomedical implants (odnośnik otworzy się w nowym oknie)

Autorzy: Ruben del Olmo, Reynier I. Revilla, Floriane Debuisson, Kitty Baert, Brecht Van Hooreweder, Anne des Rieux, Iris De Graeve, Ana Santos-Coquillat
Opublikowane w: Additive Manufacturing, Numer 116, 2026, ISSN 2214-8604
Wydawca: Elsevier BV
DOI: 10.1016/J.ADDMA.2026.105083

Data Management Plan

New Trends in the Design of Biomaterials for 3D and 4D Printing (odnośnik otworzy się w nowym oknie)

Autorzy: Rubén del Olmo, Enrique Martínez-Campos, José Javier Relinque, Alberto Gallardo, Juan Rodríguez-Hernández, Endzhe Matykina, Ana Santos-Coquillat
Opublikowane w: Advances in Material Research and Technology, Advances in Biomaterials Research, 2025
Wydawca: Springer Nature Switzerland
DOI: 10.1007/978-3-031-97481-6_3

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników

Moja broszura 0 0