STRUCTURAL RELIABLE OFFSHORE FLOATING PV SOLUTION INTEGRATING CIRCULAR CONCRETE FLOATING BREAKWATER

Projektinformationen

SUREWAVE

ID Finanzhilfevereinbarung: 101083342

DOI

10.3030/101083342

EK-Unterschriftsdatum 30 September 2022

Startdatum 1 Oktober 2022

Enddatum 30 September 2026

Finanziert unter

• Climate, Energy and Mobility

Gesamtkosten

€ 3 515 097,50

EU-Beitrag

€ 3 515 097,50

Koordiniert durch

SINTEF AS
Norway

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Websites, patent fillings, videos etc. (2)

Dissemination, Exploitation & Communication Master Plan (M18 revision)

This deliverable includes the strategy based in communication measures and targeted audiences, but also dissemination and exploitation routes. Associated to Task 8.2

Dissemination, Exploitation & Communication Master Plan

This deliverable includes the strategy based in communication measures and targeted audiences, but also dissemination and exploitation routes. To be revised on M18. Associated to Task 8.2

Documents, reports (6)

Anchoring and connections to PV system

The report for this task includes a summary of analysis results indicating advantages and disadvantages for different design options of the anchoring types and the connections between the floating breakwater and the FPV array. Based on the technical requirements from D2.2, the fulfillment of these criteria for material properties, anchoring type, cost-effectiveness, compatibility with the arrangement of power distribution cables, and functionality of the connections to the FPV array is evaluated. Associated to tasks 3.3 and 3.4.

Report on ultimate strength capacity of each connection

In this report, the ultimate strength of the criticalComponents (i.e. Mechanical joint and connection systems) of the floating PV system defined in WP3, to check the survivability during extreme scenarios (Storm conditions) will be reported. Associated to Task 6.2

Summary of global system design

Delivered as holistic design documentation for full FPV solution, based on metocean conditions and full system design. Associated with tasks 3.1, 3.2, 3.3, and particularly 2.1-3.4

Design description of internal floating PV components

Delivered as design documentation for adaptation of floating solar panels for extreme conditions, integrated with novel wave breaker technology. Associated with tasks 3.1, 3.4 and to limited extent 3.2 and 3.3

Establishing a technical stakeholders advisory board

The deliverable is signed intentions of relevant stakeholders participating in the SHB. Associated with task 2.4

Use case scenario basis for typical, rough location

In this report, several offshore locations with extreme environmental conditions will be identified and possibility of corrosion and biofouling will be analysed. The worst-case scenarios for a 20 years return period, in accordance with DNV RP 0584 will also be defined. Associated to Task 2.1.

Demonstrators, pilots, prototypes (1)

Breakwater prototype

Proof of the breakwater developed with a reduced scale of 1m (wide), 0.5 (heigh) , 2m (length). Associated to task 4.4

Veröffentlichungen

Conference proceedings (1)

SMART CORROSION MONITORING BASED ON NON DESTRUCTIVE TESTINGS (NDTs)

Autoren: Upeksha Chathurani Thibbotuwa, Ainhoa Cortés, Andoni Irizar
Veröffentlicht in: 2023
Herausgeber: DCIS

Peer reviewed articles (1)

Energies

Autoren: Joep van der Zanden ,Tim Bunnik ,Ainhoa Cortés ,Virgile Delhaye ,Guillaume Kegelart ,Thomas Pehlke and Balram Panjwani
Veröffentlicht in: Energies, Ausgabe 2059, 2024, ISSN 1996-1073
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en17092059