Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

NANOmetric bio-inspired coating for wind turbine WINGS ice protection

Description du projet

Des nanomatériaux pour une énergie éolienne puissante

L’Europe doit de toute urgence sortir de la crise énergétique actuelle. Une réduction drastique de la consommation d’énergie et l’utilisation de nouvelles technologies sont une nécessité à cet égard. L’énergie éolienne verte constitue l’une des solutions les plus prometteuses. Cependant, bien que l’hiver en Europe devrait être la meilleure période pour récolter de l’énergie, 94 % des parcs éoliens européens ne peuvent l’exploiter en raison des épisodes de givre qui provoquent des arrêts entraînant des pertes d’énergie de l’ordre de 20 %. À cet égard, le projet Nanowings, financé par le CEI, améliorera considérablement les performances, l’efficacité et la durabilité des éoliennes en mettant au point un nanorevêtement reposant sur une formulation mixte de polymères «super-glue» combinés à des nanoparticules et présentant de propriétés anti-givre et anti-encrassement de haut vol. Cette avancée devrait permettre de réduire les temps d’arrêt et de contribuer à une production d’électricité compétitive et efficace.

Objectif

Although winters are the best season for wind energy harvesting, icing is a major problem affecting the competiveness of this type of renewable energy. In Europe, about 94% of the windfarms have suffered icing events, which reduce turbine performance and causing even temporary shutdowns. Indeed, icing-induced power output losses in wind farms are found to reach over 20% of the annual production. There is not yet an efficient, cost-effective anti-icing or de-icing solution on the market: active solutions (thermal and mechanical systems) present low efficiency while passive technologies (typically coatings and paints) are not easily applied, and their durability and effectiveness are not well demonstrated.
Nanowings will overcome the icing challenge by developing a disruptive transparent nanocoating (super-glue polymers and nanoparticles blended formulation) with outstanding anti-icing and anti-fouling properties that can be applied in-situ via an innovative, portable, and light module (mini-electrospinning and heating system) which can be mounted under a remotely controlled drone. 5 g/m2 of the nanomaterial coated over the surface of a fiberglass-reinforced polyester or epoxy wind turbine blade creates a nano-rough layer (0.5 µm thick) that reduces the wettability of the surface and imprint self-cleaning properties. By avoiding ice accretion, Nanowings reduces downtimes and increases the electricity production of the wind turbine.
Nanowings is seizing a new concept of engineering and electrospinning of nanomaterials demonstrated at lab scale by partner LINARI. Moreover, the international consortium brings together top-notch academics (DTU) with seminal contributions in advanced nanomaterials and wind turbines performance under icing conditions; a well-recognized utility company (ENEL) as end-user and key testing partner (Valdihuelo Wind Farm - Spain), and an SME (EOLOGIX) with innovation in on-site wind turbines inspection based on avant-garde adhesive sensors.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-EIC - HORIZON EIC Grants

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-EIC-2022-TRANSITION-01

Voir tous les projets financés au titre de cet appel

Coordinateur

LINARI ENGINEERING SRL
Contribution nette de l'UE
€ 1 069 308,75
Adresse
VIA MALASOMA 26
56121 PISA
Italie
PME
Oui
Région
Centro (IT) Toscana Pisa
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 1 069 308,75

Participants (4)