DIgital LAser PROduction: Digital Twins of Laser Processing for Multi-Capability Manufacturing of Complex Components and Certification

Informazioni relative al progetto

DILAPRO

ID dell’accordo di sovvenzione: 101138859

DOI

10.3030/101138859

Data della firma CE 5 Dicembre 2023

Data di avvio 1 Gennaio 2024

Data di completamento 31 Dicembre 2026

Finanziato da

• Digital, Industry and Space

Costo totale

Nessun dato

Contributo UE

€ 5 815 700,07

Coordinato da

TEKNOLOGISK INSTITUT
Denmark

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (18)

Dissemination and Communication Report.

A report on the current status of dissemination and communication activities outlining the progress, challenges and results obtained in the first 18 months.

Analysis of sensors and identification of technical solutions.

In the report, the best available technologies and commercially available products will be identified. Experiments will be done to help to find the optimal solutions, which could be achieved by the usage of a single type of technology or a combination of various technologies.

Report on defect detection and classification algorithm for PBF-LB.

A report detailing the defect detection approach for PBF-LB.

Methodology to measure the environmental impact described.

A description of the methods used and their application in the project in order to carry out both LCA and LCC analyses in the DILAPRO project.

Report on validated intelligent control system.

The report will describe the performance of a system to be evaluated based on the quality of the AM parts produced, and the ability of the system to identify and correct defects in real time.

Community Building Strategy.

The plan will include a description of:·mobilization of networks and associations. ·participation in external events and fairs.·knowledge transfer to the participants, ensuring skills development of the EU workforce while preparing them for the potential implementation and use of digital manufacturing technologies.·clustering and plan for co-organization of events with fellow EU projects and initiatives. Dedicated engagement actions and knowledge transfer activities to address networks; results and open data will be delivered to key European platforms. Furthermore, the generation of a project dedicated website will be described.

Commonly distributed & agreed audit procedure

"Develop an audit template for the demonstrator location audit with focus on “substitution” potentials of “digital quality control tools"" and methods ""data areas”."

Description of relevant and current software workflows for the respective use cases.

Mapping of the software architecture requirements as well as draft and create the architecture itself for the later implementation of DILAFACT.

Report on multi-purpose laser processing and production strategy-decision tool.

A description of a decision tool to help achieve the best utilization of the laser technologies compared to processing steps and costs (environmental and monetary).

Report on defect detection and classification algorithm for DED-LB.

A report detailing the defect detection approach for DED-LB.

Community Building Report.

A report detailing the progress towards building the LASER community including status, results, challenges and next steps.

Process strategy optimization framework description.

A detailed description of the work combining multiphysics models with data-based material models to create response models for process optimization and implementing them in production.

Validation and documentation.

Defining the initial DILACERT status quo assessment procedure based on ISO/ASTM AM standards TC 261 and all other AM relevant standards and standards related to digital monitoring.

Report on reduced order models for implementation in DILAFACT.

A detailed report on the obtained reduced order models for implementation in DILAFACT.

DEC Plan: Plan for Dissemination, Exploitation, and Communication.

The plan will build on activities outlined in section 2.2 of the project proposal Part B, including defining key messages and dissemination and communication actions as well as target audiences. It will also identify the KERs and the target stakeholders, as well as any IPR considerations.

Manual guides for the methodologies of physically simulating the AM process and laser-surface interaction.

Manual guides for reliable physical simulation of additive manufacturing process and laser-surface interaction will be created.

Report on defect detection and classification algorithm for laser surface modification.

A report detailing the defect detection approach for laser surface modification.

Certification analyses.

Mapping of the needs for digital certification based on the use case definition of Task 1.1. To use the use cases as demonstrators of a digital certification approach this report will define the requirements for approaching a certification task for each use case defined in Task 1.1.

Data Management Plan (1)

DMP: Data Management Plan.

A data management plan (DMP) will describe the details of handling the data generated during the project. It will be done in the best possible way to maximise the impact and will be inspired by the FAIR principles.

Data sets, microdata, etc (1)

Database for thermal effects on microstructure and mechanical properties of DILAFACT materials.

A databank (process parameters, microstructure, property) will be generated for each studied material, and their relationship will be analysed. These high-quality data will serve as input parameters for the Digital Twins.

Pubblicazioni

Peer reviewed articles (4)

Advancing quality prediction in polymer PBF-LB: a hybrid AI and physics-guided approach

Autori: Matteo Calaon, Hao-Ping Yeh, Shuo Shan, Jesper Henri Hattel, Yang Zhang, Hans Nørgaard Hansen
Pubblicato in: CIRP Annals, 2025, ISSN 0007-8506
Editore: Elsevier BV
DOI: 10.1016/J.CIRP.2025.04.027

A comprehensive study of the effect of scanning strategy on IN939 fabricated by powder bed fusion-laser beam

Autori: Merve Nur Doğu, Seren Ozer, Mustafa Alp Yalçın, Kemal Davut, Muhannad Ahmed Obeidi, Caner Simsir, Hengfeng Gu, Chong Teng, Dermot Brabazon
Pubblicato in: Journal of Materials Research and Technology, Numero 33, 2024, ISSN 2238-7854
Editore: Elsevier BV
DOI: 10.1016/J.JMRT.2024.10.171

Eddy current testing and monitoring in metal additive manufacturing: A review

Autori: Medad C.C. Monu, Josiah C. Chekotu, Dermot Brabazon
Pubblicato in: Journal of Manufacturing Processes, Numero 134, 2025, ISSN 1526-6125
Editore: Elsevier BV
DOI: 10.1016/J.JMAPRO.2024.12.033

Driving innovation in additive manufacturing: Enhancing efficiency and certification

Autori: Christina Zeuthen
Pubblicato in: Open Access Government, Numero 46, 2025, ISSN 2516-3817
Editore: Adjacent Digital Politics Ltd
DOI: 10.56367/OAG-046-11987