Ziel
The objective of this project was to conduct basic research in the field of high-resolution optical sensors for CIM applications, eg robotics, pattern recognition and optical character recognition. The project provided fundamental technologies which will permit the development of the next generation of image sensors with more than 1 million pixels per chip.
The objective of this project was to conduct basic research in the field of high resolution optical sensors for computer integrated manufacture (CIM) applications (eg robotics, pattern recognition and optical character recognition). The project provided fundamental technologies which will permit the development of the next generation of image sensors with more than 1 million pixels per chip.
With the use of transparent conductive electrodes made out of indium tin oxide layers, instead of polycrystalline silicon electrodes, the loss in light sensitivity due to area reduction of the pixels can now be completely compensated for. The results of working devices show that the overall sensitivity can be increased by a factor of 2 or more for blue light by replacing 3 levels of polysilicon with 2 levels of indium tin oxide.
A complete system for the automatic functional testing of image sensors with respect to the most important operating parameters has been developed.
By optimizing the output stage onchip as a buried channel N-channel metal oxide semiconductor (NMOS) source, followed by 2 or 3 amplification stage for 1.5 micron NMOS technology, and using correlated double sampling of the charge coupled device (CCD) signal, an operation has been realised at 20 MHz driving frequency.
Differentstructures for 1.5 micron NMOS technology have been analyzed by computer simulation. Horizontal antiblooming structures with buried channel and with surface channel diode drains were realized with good spectral response in the whole visible and near infrared spectrum.
An imaging architecture has been proposed with a bus system where the data addresses and control are freely communicated between the sensor, the buffer and the associated processors, realizing the suite of specific functionalities.
The following results were obtained:
-Improved sensitivity: with the use of transparent conductive electrodes made out of indium-tin-oxide layers, instead of polycrystalline silicon electrodes, the loss in light sensitivity due to area reduction of the pixels can now be completely compensat ed for. All processing steps have been worked out, and the results of working devices show that the overall sensitivity can be increased by a factor of two or more for blue light by replacing three levels of polysilicon with two levels of indium-tin-oxide.
-Automated functional test: a complete system for the automatic functional testing of image sensors with respect to the most important operating parameters has been developed. It is suitable for laboratory applications and gains further improvement withan increased address space of the computer and larger capacity of the image-processing system for use in a production environment.
-Reduction of amplifier noise: high-resolution image sensors require high speed and low noise output amplifiers. By optimising the output stage on-chip as a buried channel NMOS source, followed by two or three amplification stages for 1.5 micron NMOS tec hnology, and using correlated double sampling of the CCD signal, an operation has been realised at 20 MHz driving frequency.
-Suppression of blooming: different structures for 1.5 micron NMOS technology have been analysed by computer simulation. Horizontal anti-blooming structures with buried channel and with surface channel diode drains were realised with good spectral respon se in the whole visible and near-infrared spectrum.
-Study of image-processing systems: an imaging architecture has been proposed with a bus system where data addresses and control are freely communicated between the sensor, the buffer and the associated processors, realising the suite of specific functio nalities.
Exploitation
The results of this project will be used in further high-resolution sensor developments, with industrial exploitation expected in the early 1990s.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren optische Sensoren
- Naturwissenschaften Chemiewissenschaften anorganische Chemie anorganische Verbindungen
- Naturwissenschaften Chemiewissenschaften anorganische Chemie Nachübergangsmetalle
- Naturwissenschaften Informatik und Informationswissenschaften künstliche Intelligenz Mustererkennung
- Naturwissenschaften Mathematik angewandte Mathematik mathematisches Modell
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
20095 Hamburg
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.