Ziel
The objective of this project is to develop, implement and test a general-purpose multi-sensor system to optimise the operation of industrial fuel-burning systems, and to control and assist the maintenance of industrial furnaces and boilers.
The objective of this project was to develop, implement and test a general purpose multisensor system to optimise the operation of industrial fuel burning systems, and to control and assist the maintenance of industrial furnaces and boilers. The project was aimed to assure optimum conditions of industrial burning systems through the maintenance of efficient flame characteristics, which are achieved with the implementation of adequate control mechanisms in 2 different levels. Low level control aims at the definition of simplified dynamic models and proper control strategies and includes sensor integration and the implementation and optimization of new sensors, either physical and chemical or optical. It has been given particular attention to the development of a vision system to acquire data on flames and to classify them according with previously learned standards. Other sensors under development included viscosity meters for heavy fuel oil and molten glass and a volumetric fuel flowmeter for fuel oil.
High level control aims at the definition and implementation of actions based on: sensorial information, specific knowledge driven by sophisticated mathematical models of the flow and heat transfer characteristics of industrial burning systems and empirical knowledge of subsystem not considered by the mathematical models.
The AIMBURN project was essentially industry driven, but the progress of the work revealed a scientific potential which was partially exploited. Considerable innovative and original work include: use of computer vision for flame classification, experimental characterization of turbulent flames in mutual interaction, numerical simulation of turbulent flame images, implementation of furnace control strategies based on physically derived models, sensor development for molten glass and heavy fuel oil viscosity, dedicated hardware integrating recently produced digital signal processing (DSP) chips in purpose built architectures, development of physical submodels to predict nitrogen oxide emissions from industrial combustion environments, application of expert systems to real time processes, and standardization of procedures for knowledge acquisition in continuous plants.
The impetus for the work stems from the fact that industrial competitiveness within the European Community over the next decade will undoubtedly depend on the efficient use of information technologies to optimise energy consumption. Since energy consumption and pollution are frequently linked, the implications for pollution abatement may have also to be considered in the application of IT to improve industrial competitiveness. The project is aimed to assure optimum conditions of industrial burning systems through the maintenance of efficient flame characteristics, which are achieved with the implementation of adequate control mechanisms in two different levels, as follows:
Low-level control
- Definition of simplified dynamic models and proper control strategies.
- Implementation and optimization of new sensors, either physical and chemical or optical. It has been given particular attention to the development of a vision system to acquire data on flames and to classify them according with previously learned standards. Other sensors under development included viscosity meters for heavy fuel-oil and molten glass and a volumetric fuel flowmeter for fuel-oil.
- Sensor integration.
High-level control
Definition and implementation of actions based on:
- Sensorial information
- Specific knowledge driven by sophisticated mathematical models of the flow and heat transfer characteristics of industrial burning systems.
- Empirical knowledge of sub-system not considered by the mathematical models.
The AIMBURN project has been essentially industry-driven, but the progress of the work has revealed a scientific potential which has been naturally exploited. Considerable innovative and original work includes:
- use of computer vision for flame classification
- experimental characterisation of turbulent flames in mutual interaction
- numerical simulation of turbulent flame images
- implementation of furnace control strategies based on physically-derived models
- sensor development for molten glass and heavy fuel-oil viscosity
- dedicated hardware integrating recently produced DSP chips in purpose-built architectures
- development of physically sub-models to predict NOx emissions from industrial combustion environments
- application of expert systems to real time processes
- standardisation of procedures for knowledge acquisition in continuous plants.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Signalverarbeitung
- Technik und Technologie Elektrotechnik, Elektronik, Informationstechnik Elektrotechnik Sensoren
- Technik und Technologie Werkstofftechnik amorphe Feststoffe
- Technik und Technologie Umwelttechnik Energie und Kraftstoffe
- Naturwissenschaften Mathematik angewandte Mathematik mathematisches Modell
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Wir bitten um Entschuldigung ... während der Ausführung ist ein unerwarteter Fehler aufgetreten.
Sie müssen sich authentifizieren. Ihre Sitzung ist möglicherweise abgelaufen.
Vielen Dank für Ihr Feedback. Sie erhalten in Kürze eine E-Mail zur Übermittlungsbestätigung. Wenn Sie sich für eine Benachrichtigung über den Berichtsstatus entschieden haben, werden Sie auch im Falle einer Änderung des Berichtsstatus benachrichtigt.
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
1096 LISBOA
Portugal
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.