Cel
The objective of this project is to develop, implement and test a general-purpose multi-sensor system to optimise the operation of industrial fuel-burning systems, and to control and assist the maintenance of industrial furnaces and boilers.
The objective of this project was to develop, implement and test a general purpose multisensor system to optimise the operation of industrial fuel burning systems, and to control and assist the maintenance of industrial furnaces and boilers. The project was aimed to assure optimum conditions of industrial burning systems through the maintenance of efficient flame characteristics, which are achieved with the implementation of adequate control mechanisms in 2 different levels. Low level control aims at the definition of simplified dynamic models and proper control strategies and includes sensor integration and the implementation and optimization of new sensors, either physical and chemical or optical. It has been given particular attention to the development of a vision system to acquire data on flames and to classify them according with previously learned standards. Other sensors under development included viscosity meters for heavy fuel oil and molten glass and a volumetric fuel flowmeter for fuel oil.
High level control aims at the definition and implementation of actions based on: sensorial information, specific knowledge driven by sophisticated mathematical models of the flow and heat transfer characteristics of industrial burning systems and empirical knowledge of subsystem not considered by the mathematical models.
The AIMBURN project was essentially industry driven, but the progress of the work revealed a scientific potential which was partially exploited. Considerable innovative and original work include: use of computer vision for flame classification, experimental characterization of turbulent flames in mutual interaction, numerical simulation of turbulent flame images, implementation of furnace control strategies based on physically derived models, sensor development for molten glass and heavy fuel oil viscosity, dedicated hardware integrating recently produced digital signal processing (DSP) chips in purpose built architectures, development of physical submodels to predict nitrogen oxide emissions from industrial combustion environments, application of expert systems to real time processes, and standardization of procedures for knowledge acquisition in continuous plants.
The impetus for the work stems from the fact that industrial competitiveness within the European Community over the next decade will undoubtedly depend on the efficient use of information technologies to optimise energy consumption. Since energy consumption and pollution are frequently linked, the implications for pollution abatement may have also to be considered in the application of IT to improve industrial competitiveness. The project is aimed to assure optimum conditions of industrial burning systems through the maintenance of efficient flame characteristics, which are achieved with the implementation of adequate control mechanisms in two different levels, as follows:
Low-level control
- Definition of simplified dynamic models and proper control strategies.
- Implementation and optimization of new sensors, either physical and chemical or optical. It has been given particular attention to the development of a vision system to acquire data on flames and to classify them according with previously learned standards. Other sensors under development included viscosity meters for heavy fuel-oil and molten glass and a volumetric fuel flowmeter for fuel-oil.
- Sensor integration.
High-level control
Definition and implementation of actions based on:
- Sensorial information
- Specific knowledge driven by sophisticated mathematical models of the flow and heat transfer characteristics of industrial burning systems.
- Empirical knowledge of sub-system not considered by the mathematical models.
The AIMBURN project has been essentially industry-driven, but the progress of the work has revealed a scientific potential which has been naturally exploited. Considerable innovative and original work includes:
- use of computer vision for flame classification
- experimental characterisation of turbulent flames in mutual interaction
- numerical simulation of turbulent flame images
- implementation of furnace control strategies based on physically-derived models
- sensor development for molten glass and heavy fuel-oil viscosity
- dedicated hardware integrating recently produced DSP chips in purpose-built architectures
- development of physically sub-models to predict NOx emissions from industrial combustion environments
- application of expert systems to real time processes
- standardisation of procedures for knowledge acquisition in continuous plants.
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
- inżynieria i technologia inżynieria elektryczna, inżynieria elektroniczna, inżynieria informatyczna inżynieria elektroniczna przetwarzanie sygnałów
- inżynieria i technologia inżynieria elektryczna, inżynieria elektroniczna, inżynieria informatyczna inżynieria elektroniczna czujniki
- inżynieria i technologia inżynieria materiałowa amorficzne ciała stałe
- inżynieria i technologia inżynieria śodowiska energetyka i paliwa
- nauki przyrodnicze matematyka matematyka stosowana model matematyczny
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Przepraszamy… podczas wykonywania operacji wystąpił nieoczekiwany błąd.
Wymagane uwierzytelnienie. Powodem może być wygaśnięcie sesji.
Dziękujemy za przesłanie opinii. Wkrótce otrzymasz wiadomość e-mail z potwierdzeniem zgłoszenia. W przypadku wybrania opcji otrzymywania powiadomień o statusie zgłoszenia, skontaktujemy się również gdy status ulegnie zmianie.
Program(-y)
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Temat(-y)
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Brak dostępnych danych
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenie do składania wniosków
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
Brak dostępnych danych
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
System finansowania
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Brak dostępnych danych
Koordynator
1096 LISBOA
Portugalia
Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.