Obiettivo
The objective of this project is to develop, implement and test a general-purpose multi-sensor system to optimise the operation of industrial fuel-burning systems, and to control and assist the maintenance of industrial furnaces and boilers.
The objective of this project was to develop, implement and test a general purpose multisensor system to optimise the operation of industrial fuel burning systems, and to control and assist the maintenance of industrial furnaces and boilers. The project was aimed to assure optimum conditions of industrial burning systems through the maintenance of efficient flame characteristics, which are achieved with the implementation of adequate control mechanisms in 2 different levels. Low level control aims at the definition of simplified dynamic models and proper control strategies and includes sensor integration and the implementation and optimization of new sensors, either physical and chemical or optical. It has been given particular attention to the development of a vision system to acquire data on flames and to classify them according with previously learned standards. Other sensors under development included viscosity meters for heavy fuel oil and molten glass and a volumetric fuel flowmeter for fuel oil.
High level control aims at the definition and implementation of actions based on: sensorial information, specific knowledge driven by sophisticated mathematical models of the flow and heat transfer characteristics of industrial burning systems and empirical knowledge of subsystem not considered by the mathematical models.
The AIMBURN project was essentially industry driven, but the progress of the work revealed a scientific potential which was partially exploited. Considerable innovative and original work include: use of computer vision for flame classification, experimental characterization of turbulent flames in mutual interaction, numerical simulation of turbulent flame images, implementation of furnace control strategies based on physically derived models, sensor development for molten glass and heavy fuel oil viscosity, dedicated hardware integrating recently produced digital signal processing (DSP) chips in purpose built architectures, development of physical submodels to predict nitrogen oxide emissions from industrial combustion environments, application of expert systems to real time processes, and standardization of procedures for knowledge acquisition in continuous plants.
The impetus for the work stems from the fact that industrial competitiveness within the European Community over the next decade will undoubtedly depend on the efficient use of information technologies to optimise energy consumption. Since energy consumption and pollution are frequently linked, the implications for pollution abatement may have also to be considered in the application of IT to improve industrial competitiveness. The project is aimed to assure optimum conditions of industrial burning systems through the maintenance of efficient flame characteristics, which are achieved with the implementation of adequate control mechanisms in two different levels, as follows:
Low-level control
- Definition of simplified dynamic models and proper control strategies.
- Implementation and optimization of new sensors, either physical and chemical or optical. It has been given particular attention to the development of a vision system to acquire data on flames and to classify them according with previously learned standards. Other sensors under development included viscosity meters for heavy fuel-oil and molten glass and a volumetric fuel flowmeter for fuel-oil.
- Sensor integration.
High-level control
Definition and implementation of actions based on:
- Sensorial information
- Specific knowledge driven by sophisticated mathematical models of the flow and heat transfer characteristics of industrial burning systems.
- Empirical knowledge of sub-system not considered by the mathematical models.
The AIMBURN project has been essentially industry-driven, but the progress of the work has revealed a scientific potential which has been naturally exploited. Considerable innovative and original work includes:
- use of computer vision for flame classification
- experimental characterisation of turbulent flames in mutual interaction
- numerical simulation of turbulent flame images
- implementation of furnace control strategies based on physically-derived models
- sensor development for molten glass and heavy fuel-oil viscosity
- dedicated hardware integrating recently produced DSP chips in purpose-built architectures
- development of physically sub-models to predict NOx emissions from industrial combustion environments
- application of expert systems to real time processes
- standardisation of procedures for knowledge acquisition in continuous plants.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica elaborazione del segnale
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori
- ingegneria e tecnologia ingegneria dei materiali solidi amorfi
- ingegneria e tecnologia ingegneria ambientale energia e carburanti
- scienze naturali matematica matematica applicata modello matematico
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
1096 LISBOA
Portogallo
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.