European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

Design, Simulation and Flight Reynolds Number Testing for Advanced High-Lift Solutions

Objectif

DeSiReH focus on both, the numerical design tools and the experimental measurement techniques for cryogenic conditions, with the objective to improve the industrial design process for laminar wings in terms of product quality, efficiency, and development cost reduction. The work focuses on the design of high lift devices. DeSiReH addresses the following quantified objectives which will make a significant contribution to meeting Vision 2020 goals: 1) Reduction of industrial A/C development costs by 5% by reduced and more efficient Wind Tunnel Testing 2) Decrease time-to-market by 5% by improved aerodynamic design turn-around time 3) Improve industrial High-Lift design process efficiency by 15% 4) Reduce A/C drag by 5% by enabling NLF though compatible High-Lift-Design To accomplish these objectives the project is planned for a period of 4 years and a budget of 7.6 Mio. Euro. The consortium consists of 6 industry partner, 7 research establishments, 3 universities, 2 small and medium-sized enterprise and the European Transonic Wind tunnel (ETW). Existing and validated high-fidelity numerical tools are composed to an efficient High-Lift design and optimization process chain in WP1. The strategies and tools developed are applied in WP 2 to the aerodynamic design of a high lift system for the future pointing HARLS wing (High Aspect Ratio Low Sweep) with the constraint to maintain Natural Lamiar Flow at cruise to the best possible extend. WP 3 focuses on the improvement of the experimental measurement technique for cryogenic testing. The objectives here are to enhance the measurement accuracy of the results and to generate the capability to apply different important techniques (e.g. transition measurement & deformation measurement). These techniques are finally applied in the ETW at High-Reynolds-Numbers on the HARLS model equipped with the High-Lift-System, designed in WP2. The final assessment of DeSiReH results is done in WP4 by assessing the numerical

Champ scientifique

Mots‑clés

Programme(s)

Thème(s)

Appel à propositions

FP7-AAT-2008-RTD-1
Voir d’autres projets de cet appel

Régime de financement

CP-FP - Small or medium-scale focused research project

Coordinateur

DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV
Contribution de l’UE
€ 958 663,00
Adresse
LINDER HOHE
51147 Koln
Allemagne

Voir sur la carte
Région
Nordrhein-Westfalen Köln Köln, Kreisfreie Stadt
Type d’activité
Research Organisations
Contact administratif
Petra Rodenwaldt (Ms.)
Liens
Coût total
Aucune donnée

Participants (20)

Partager cette page

Télécharger

Dernière mise à jour: 1 Août 2019

Mon livret

Permalink: https://cordis.europa.eu/project/id/233607/fr

European Union, 2024