Obiettivo
The MAPICC 3D project and concept aims at developing manufacturing system for 3D shaped, multilayered products based on flexible materials. The ultimate goals are:
> The development of integrated and automated process chain able to produce from hybrid thermoplastic yarn to 3D complex shaped thermoplastic composite structure in single step thermoplastic consolidation process.
> The development of flexible industrial tools, able to produce customized final composites: possibility to reinforce the preform by coating, weaving multilayers, by injection of foam, by introduction of sensors (control quality of preform during the production or monitor the integrity of composite during use)
> The development of modelling tool in order to help understanding of the mechanisms involved in the new technologies and to prototype virtually 3D preform, predictive tools to evaluate the physical and mechanical properties of final 3D preform and final composites structure and at the last step reverse engineering.
The speed of production and the cost of manufacturing the 3D preform will be in accordance with the transport, building and energy thanks to:
• The use of raw materials at low cost based on thermoplastic polymer, or regenerated fibres,
• A decrease of production time. The polluting, labour-intensive and expensive steps of cutting, forming and joining, of current composites production could be avoiding.
• A dynamic quality control during the production to improve the process robustness,
• A decrease of quantity of wastes in comparison to current 2D preform based composite structures manufacturing.
The consortium allows integrating the entire process chain and involves the industrial stakeholders from machine tools, automation and modelling processing of flexible materials, yarn and textiles, composites and end users for transport: industry insures the leadership of the project.
Campo scientifico
- engineering and technologymaterials engineeringcomposites
- social sciencessociologyindustrial relationsautomation
- engineering and technologymaterials engineeringtextiles
- engineering and technologymaterials engineeringcoating and films
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
Programma(i)
Argomento(i)
Invito a presentare proposte
FP7-NMP-2010-LARGE-4
Vedi altri progetti per questo bando
Meccanismo di finanziamento
CP-IP - Large-scale integrating projectCoordinatore
59056 Roubaix
Francia
Mostra sulla mappa
Partecipanti (20)
5020 Namur
Mostra sulla mappa
92130 issy les moulineaux
Mostra sulla mappa
20133 Milano
Mostra sulla mappa
01069 Dresden
Mostra sulla mappa
75272 Paris
Mostra sulla mappa
92220 BAGNEUX
Mostra sulla mappa
10 000 ZAGREB
Mostra sulla mappa
Partecipazione conclusa
59980 BERTRY
Mostra sulla mappa
1895 VIONNAZ
Mostra sulla mappa
93400 Saint Ouen
Mostra sulla mappa
1048 Riga
Mostra sulla mappa
7555 RJ Hengelo Ov
Mostra sulla mappa
1004 Riga
Mostra sulla mappa
Partecipazione conclusa
59100 ROUBAIX
Mostra sulla mappa
Partecipazione conclusa
7443 RE NIJVERDAL
Mostra sulla mappa
405 08 Goteborg
Mostra sulla mappa
Partecipazione conclusa
59700 MARCQ EN BAROEUL
Mostra sulla mappa
63263 NEU-ISENBURG
Mostra sulla mappa
7440 AA Nijverdal
Mostra sulla mappa
04758 OSCHATZ
Mostra sulla mappa