Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-06-18

Reliability assessment of key technologies for high temperature electrical machines

Obiettivo

The project objective is to evaluate the reliability of motor winding technologies able to work at high temperatures. To achieve this goal within the time define in the Clean Sky call sheet, it is necessary to rely on existing technologies, which offer opportunities for rapid implementations on conventional machines, while opening new opportunities towards higher temperatures with innovative technologies.
Three sets of technologies will be studied:
- The technologies based on enamelled wires associated to polymer impregnation varnishes.
- Technologies based on wires wrapped with glass fibber associated to impregnations made with epoxy resins.
- The insulation technologies based on ceramics, which offer potential prospects for very high temperatures.

The three sets of technologies will be tested for increasing temperatures on representative test vehicles (twisted pairs, transformer coils and motorettes) involving measurement systems able to get the main parameters of the insulation system (DC and AC leakage currents, partial discharge inception voltage, breakdown voltage, …). The analysis of changes in recorded parameters during the test campaigns will estimate the maximum permissible temperature in the heart of the winding for each technology. These data, combined with constraints of implementation of each technology will define recommendations for the design of electrical machines able to operate at high temperatures for each selected technology.

The part relating to the use of ceramic insulations opens the way to a major technological leap. With such materials, the maximum operating temperature of electrical machines will no longer be imposed by the winding insulation system but by other parts (magnetic or mechanical), consequently new design methods will have to be developed. It is therefore important to put this new approach against the best we might obtain from other technologies by proposing solutions applicable in the short term.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/it/web/eu-vocabularies/euroscivoc.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Programma(i)

Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

SP1-JTI-CS-2011-01
Vedi altri progetti per questo bando

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinatore

UNIVERSITE D'ARTOIS
Contributo UE
€ 119 126,40
Indirizzo
RUE DU TEMPLE 9
62000 Arras
Francia

Mostra sulla mappa

Regione
Hauts-de-France Nord-Pas de Calais Pas-de-Calais
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato

Partecipanti (2)

Il mio fascicolo 0 0