Resource Efficient Production Route for Rare Earth Magnets

Risultati finali

Health and safety report for the development of the SDS manufacturing route
REProMag Corporate Identity
Final publication
Life Cycle Assessment benchmarking and report for conventional manufacturing
Draft Dissemination and exploitation plan
Life Cycle Assessment benchmarking and report for the SDS manufacturing method
Intermediate and final plan for the use and dissemination of the results

ntermediate and final plan for the use and dissemination of the resultsDate for intermediate plan Month 18Date for final plan Month 36

REProMag web presence strategy report
Training materials
Final environmental and economic report: Considerations and future guidance

Final environmental and economic report Considerations and future guidance

Life Cycle Cost report
Literature review: RE magnets, associated recycling methods and environmental considerations

Literature review RE magnets associated recycling methods and environmental considerations

Working demonstration: Headphones/mircophones containing transducers which contain magnetic parts produced by the SDS processing route

Working demonstration: Headphones/mircophones containing transducers which contain magnetic parts produced by the SDS processing route (= demonstrator 1-3)

Demonstrator parts RE magnets according to specification
Miniaturised magnet rotors for electrical motors/generators manufactured by the SDS processing route

Miniaturised magnet rotors for electrical motorsgenerators manufactured by the SDS processing route demonstrator 4 and 5

REProMag 6-monthly newsletters
REProMag project website
REProMag project leaflet

REProMag project leafletLeaflet 1 Month 6Leaflet 2 Month 25

REProMag 3 short videos
Report on Press releases

Pubblicazioni

Properties for PIM Feedstocks Used in Fused Filament Fabrication

Autori: C. Kukla, I. Duretek, S. Schuschnigg, J. Gonzalez-Gutierrez, C. Holzer
Pubblicato in: World PM 2016, Numero 9 October 2016, 2016
Editore: EPMA European Powder Metallurgy Association

Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

Autori: Christian Kukla, Joamin Gonzalez-Gutierrez, Ivica Duretek, Stephan Schuschnigg, Clemens Holzer
Pubblicato in: AIP Conference Proceedings volume 1914, Numero 2017, 2017, Pagina/e 190006
Editore: AIP Publishing LLC
DOI: 10.1063/1.5016795

Lithographic Additive Manufacturing of Metal-Based Suspensions

Autori: G. Mitteramskogler, M. Schwentenwein, S. Seisenbacher, C. Burkhardt, O. Weber, C. Gierl-Mayer
Pubblicato in: Euro PM2017, Numero 1 October 2017, 2017
Editore: EPMA European Powder Metallurgy Association

Special Materials and Technologies for Fused Filament Fabrication

Autori: M. Spörk, J. Gonzalez-Gutierrez, C. Kuklab and S. Schuschnigg, C. Holzer
Pubblicato in: PPS-2016 Polymer Processing Society Asia/Australia Conference, Numero 11 October 2016, 2016
Editore: Polymer Processing Society Asia/Australia Conference

Fused Filament Fabrication (FFF) of PIM Feedstocks

Autori: C. Kukla, J. Gonzalez-Gutierrez, S. Cano-Cano, S. Hampel, C. Burkhardt, T. Moritz, C. Holzer
Pubblicato in: VI Congreso Iberoamericano de Pulvimetalurgia, Numero 7 June 2017, 2017
Editore: Congreso Iberoamericano de Pulvimetalurgia

Filler Content and Properties of Highly Filled Filaments for Fused Filament Fabrication of Magnets

Autori: J. Gonzalez-Gutierrez, I. Duretek, C. Holzer, F. Arbeiter, C. Kukla
Pubblicato in: ANTEC® 2017, Numero 9 May 2017, 2017
Editore: SPE ANTEC®

Shaping, debinding and sintering of steel components via fused filament fabrication

Autori: J. Gonzalez-Gutierrez, D. Godec, C. Kukla, T. Schlauf, C. Burkhardt, C. Holzer
Pubblicato in: CIM 2017 Computer Integrated Manufacturing and High Speed Machining, Volume 16, Numero 8 June 2017, 2017, Pagina/e 99
Editore: Croation Association of Production Engineering

The production of magnets by FFF - Fused Filament Fabrication

Autori: C. Kukla, J. Gonzalez-Gutierrez, C. Burkhardt, O. Weber, C. Holzer
Pubblicato in: EuroPM2017, Numero 1 October 2017, 2017, Pagina/e 6
Editore: EPMA European Powder Metallurgy Association

Fused Filament Fabrication (FFF) of 316L Green Parts for the MIM process

Autori: C. Burkhardt, P. Freigassner, O. Weber, P. Imgrund, S. Hampel
Pubblicato in: World PM 2016, Numero 9 October 2016, 2016
Editore: EPMA European Powder Metallurgy Association

Characterization of bulk rare-earth permanent magnets with complex geometries

Autori: N. Hillier, M. J. Hall, S. Turner, S. A. C. Harmon, C. C. A. Hoare and H. J. Rossiter
Pubblicato in: REPM 2016 - 24th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications, Numero 28 August 2016, 2016, Pagina/e P2-31
Editore: REPM 2016

Metal Injection Moulding of NdFeB based on Recycled Powders

Autori: C. Burkhardt, P. Imgrund, O. Weber, T. Schlauf, K. Pischang, J. Gonzalez-Gutierrez, C. Kukla, M. Degri, I. Rex Harris, L. Pickering, A. Walton
Pubblicato in: REPM 2016 - 24th International Workshop on Rare Earth and Future Permanent Magnets and Their Applications, Numero 28 August 2016, 2016, Pagina/e O2-1200
Editore: REPM 2016

Metal Injection Moulding of NdFeB Based On Recycled Powders

Autori: P. Imgrund, O. Weber, T. Schlauf, K. Pischang, L. Pickering, A. Walton, J. Gonzalez-Gutierrez, C. Kukla, C. Burkhardt
Pubblicato in: World PM 2016, Numero 9 October 2016, 2016
Editore: EPMA European Powder Metallurgy Association

Tailored Metal Injection Moulding Of Isotropic NdFeB Hard Magnets Based On Recycled Powders With And Without Nd-Additions

Autori: C. Burkhardt, O. Weber, B. Podmiljsak , J. Gonzalez-Gutierrez , C. Kukla , M.J. Degri , I.R. Harris, A. Walton
Pubblicato in: Euro PM2017, Numero 1 October 2017, 2017
Editore: EPMA European Powder Metallurgy Association

Ressourceneffiziente Herstellung von MIM-Hartmagneten aus Recyclingmaterial in einem geschlossenen Materialkreislauf

Autori: C. Burkhardt, O. Weber, B. Podmiljsak , J. Gonzalez-Gutierrez , C. Kukla , M.J. Degri , I.R. Harris, A. Walton
Pubblicato in: Pulvermetallurgie - Schlüssel zu Mobilität, Pulvermetallurgie in Wissenschaft und Praxis, Band 33, Numero November 2017, 2017
Editore: Heimdall Verlag, Tagungsband des 36. Hagener Symposium

Fused Filament Fabrication for Metallic Parts

Autori: J. Gonzalez-Gutierrez, C. Kukla, S. Schuschnigg, I. Duretek and C. Holzer
Pubblicato in: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt, Numero 6 April 2016, 2016, Pagina/e 187-188, ISBN 978-3-9503248-5-3
Editore: Kunststofftechnik Leoben

Structure of Polypropylene Macromolecules in the Vicinity of Fe2O3 Surface

Autori: A. Gooneie, S. Schuschnigg and C. Holzer
Pubblicato in: 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt, Numero 6 April 2016, 2016, Pagina/e 189-190, ISBN 978-3-9503248-5-3
Editore: Kunststofftechnik Leoben

Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

Autori: Christian Kukla, Ivica Duretek, Stephan Schuschnigg, Joamin Gonzalez-Gutierrez, Ali Gooneie, Clemens Holzer
Pubblicato in: IBEREO15 - Challenges in rheology and product development, Numero 7 September 2015, 2015, Pagina/e 46-49
Editore: Universidade de Coimbra

Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

Autori: Christian Kukla, Ivica Duretek, Joamin Gonzalez-Gutierrez, Clemens Holzer
Pubblicato in: EuroPM2015, Numero October 2015, 2015
Editore: EPMA European Powder Metallurgy Association

Measurement of the DC Properties of Permanent Magnets Using a Pulsed Field Magnetometer

Autori: Nicholas Hillier, Michael Hall, Steven Turner and Stuart Harmon
Pubblicato in: ICM 2015, Numero July 2015, 2015, Pagina/e 2369
Editore: Publications Committee ICM 2015

A novel experimental determination of the magnetometric self-demagnetization factor

Autori: Nicholas Hillier, Michael Hall, Steven Turner and Stuart Harmon
Pubblicato in: ICM 2015, Numero July 2015, 2015, Pagina/e 1514
Editore: Publications Committee ICM 2015

Ressourceneffiziente Herstellung von NdFeB-Hartmagneten aus Recyclingmaterial

Autori: Carlo Burkhardt
Pubblicato in: Focus Werkstoffe, Pforzheimer Werkstofftag 2015, Numero Band 153, 2015, 2015, Pagina/e 115-121
Editore: WSP Pforzheim

Atomistic Modelling of Confined Polypropylene Chains between Ferric Oxide Substrates at Melt Temperature

Autori: Ali Gooneie, Joamin Gonzalez-Gutierrez, Clemens Holzer
Pubblicato in: Polymers, Numero 8/12, 2016, Pagina/e 361, ISSN 2073-4360
Editore: MDPI AG
DOI: 10.3390/polym8100361

3D Printing Conditions Determination For Feedstock Used In Fused Filament Fabrication (FFF) Of 17-4PH Stainless Steel Parts

Autori: J. Gonzalez-Gutierez, D. Godec, R. Guráň, M. Spoerk, C. Kukla, C. Holzer
Pubblicato in: Metalurgija, Volume 57 Numero 1-2, Numero 2017, 2017, Pagina/e 117-120, ISSN 0543-5846
Editore: Hrvatsko Metalursko Drustvo/Croatian Metallurgical Society

New approach to production of PIM rare earth magnets

Autori: B. Williams
Pubblicato in: PIM Powder Injection Moulding International, Vol. 11 No. 1, PIM at World PM2016: Part 3, Numero March 2017, 2017, Pagina/e 88-89, ISSN 2055-6667
Editore: Inovar Communications Ltd.

Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions

Autori: C. Burkhardt, O. Weber, B. Podmiljsak, J. Gonzalez-Gutierrez, C. Kukla, M. Degri, I. R. Harris, A. Walton
Pubblicato in: PIM Powder Injection Moulding International, Vol. 11 No. 4, MIM of isotropic NdFeB hard magnets, Numero December 2017, 2017, Pagina/e 75-80, ISSN 2055-6667
Editore: Inovar Communications Ltd.

3D print of polymer bonded rare-earth magnets, and 3D magnetic field scanning with an end-user 3D printer

Autori: C. Huber, C. Abert, F. Bruckner, M. Groenefeld, O. Muthsam, S. Schuschnigg, K. Sirak, R. Thanhoffer, I. Teliban, C. Vogler, R. Windl, D. Suess
Pubblicato in: Applied Physics Letters, Numero 109/16, 2016, Pagina/e 162401, ISSN 0003-6951
Editore: American Institute of Physics
DOI: 10.1063/1.4964856

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica