Building Innovation in the Extended Digital Chain

Risultati finali

The Data Management Plan describes the data management life cycle for all data sets that will be collected, processed or generated by the action. It is a document describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved

"Research exhibition ""Prototypes"" and colloquia 2"

Show-casing material research results and reporting in journal form of first shared colloquium. The research exhibition “Prototypes” focuses on direct full scale testing of defined design criteria against real-world methods of realisation and production.

Workshop-seminar 2

The deliverable will report on progress and outcomes of workshop-seminar 2. The workshop-seminar is a three part event with the scientific foci: 2.1) Communication design: Identifying methods for interdisciplinary collaboration. 2.2) Simulating design: Introducing virtual prototyping strategies and for new material practice. 2.3) Materialising design: Introducing novel materials for robotically steered fabrication.

Concluding international conference and extended catalogue

Concluding international conference with peer-reviewed paper presentations from the field. Completion of final reporting of research results in extended catalogue. Review of results and their contextualisation in industrial context.

Workshop-seminar 1

The deliverable will report on progress and outcomes of workshop-seminar 1. The workshop-seminar is a three part event with the scientific foci: 1.1) Communication design: Introducing light weight simulation tools for early stage design structural ideation 1.2) Simulating design: Identifying the relevance of accurate simulation tools within the context of design and building industry. 1.3) Materialising design: Identifying critical concepts and drives of robotic fabrication.

"Research exhibition ""Design Probes"" and colloquia 1"

Show-casing material research results and reporting in journal form of first shared colloquium. The research exhibition “Design Probes” focuses on early speculative design probes allowing ideation.

"Research exhibition ""Demonstrators"" and VIVA"

Show-casing material research results and reporting in journal form of first shared colloquium. The research exhibition “Demonstrators” focuses on proof-of-concept testing design criteria in direct spatial manners.

Website development

A web-based blog is designed and published.

Updated Data Management Plan

According to participation in Horizon 2020 Open Research Data pilot.

Pubblicazioni

digital fabrication with virtual and augmented reality for Monolithic earthen shells

Autori: chaltiel, stephanie; bravo, Maite; Chronis, Angelos
Pubblicato in: shock! sharing of Computable Knowledge, Numero 1, 2017
Editore: ecaade
DOI: 10.5281/zenodo.1064004

Multi-Scalar Modelling for Free-form Timber Structures

Autori: Paul Poinet, Paul Nicholas, Martin Tamke, Mette Ramsgard Thomsen
Pubblicato in: IASS 2016 Tokyo Symposium: Spatial Structures in the 21st Century, Numero September 16-30 2016, 2016
Editore: IASS
DOI: 10.5281/zenodo.2611218

Digital Tools Beyond Aesthetics

Autori: Dimitrie A. Stefanescu
Pubblicato in: Research Based Education, Numero Volume 2, 2016, Pagina/e 481-489, ISBN 978-0-9929485-9-7
Editore: The Bartlett School of Architecture
DOI: 10.5281/zenodo.3265817

Geometry-Material Coordination for Passive Adaptive Solar Morphing Envelopes

Autori: Sarah Mokhtar, Christopher Leung and Angelos Chronis
Pubblicato in: SimAUD 2017, Numero 2017 Proceedings of the Symposium on Simulation for Architecture and Urban Design, 2017
Editore: SIMULATION COUNCILS, INC

Symbiotic Associations

Autori: Baseta, Efilena; Chronis, Angelos
Pubblicato in: ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines, Numero Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), October, 2016, 2016, Pagina/e pp. 470-477, ISBN 978-0-692-77095-5
Editore: ACADIA

Remembrane - A Shape Changing Adaptive Structure

Autori: Ji Won Jun, Matteo Silverio, Josep Alcover Llubia, Areti Markopoulou, Angelos Chronis and Alexandre Dubor
Pubblicato in: CAADFutures 2017, 2017
Editore: Springer

Integration of CFD Simulations in Computational Design for Harnessing the Natural Ventilation Performance of Typical Atrium Spaces in Athens, Greece

Autori: Angelos Chronis; Foteini Stefopoulou; Katherine Liapi
Pubblicato in: 2018 Building Performance Analysis Conference and SimBuild co-organized by ASHRAE and IBPSA-USA, 2017
Editore: ASHRAE and IBPSA-USA
DOI: 10.5281/zenodo.3266193

Dry and Liquid Clay Mix for Bioshotcrete

Autori: chaltiel Stephanie; bravo Maite; mansouri Masoumeh; goessens sebastien; Latteur Pierre; Ahmad Ismail
Pubblicato in: International Association for Shell and Spatial Structures (IASS), Numero 5, 2018
Editore: IASS
DOI: 10.5281/zenodo.2669424

Adaptive Robotic Training Methods for Subtractive Manufacturing

Autori: Brugnaro, Giulio; Hanna, Sean
Pubblicato in: Acadia 2017 Disciplines & Disruption: Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture. (pp. pp. 164-169). Acadia Publishing Company: Cambridge, MA, USA. (2017), Numero 1, 2017
Editore: MIT
DOI: 10.5281/zenodo.2620086

Schema-Based Workflows and Inter-Scalar Search Interfaces for Building Design

Autori: Poinet, Paul; Tamke, Martin; Ramsgaard Thomsen, Mette; Scheurer, Fabian; Fisher, Al
Pubblicato in: Proceedings of the 11th European Conference on Product and Process Modelling (ECPPM 2018), Numero 29, 2018
Editore: eWork and eBusiness in Architecture, Engineering and Construction:
DOI: 10.5281/zenodo.2611206

Light formwork for earthen monolithic shells

Autori: Elizabeta samec; Aakash Srivastava; Stephanie Chaltiel
Pubblicato in: International Conference on Sustainable Materials, Systems and Structures (SMSS2019), Numero 29, 2019
Editore: International Conference on Sustainable Materials, Systems and Structures (SMSS2019)
DOI: 10.5281/zenodo.2669094

Digital fabrication phasing for monolithic shells

Autori: chaltiel Stephanie; Bravo Maite
Pubblicato in: Proceedings of International Association for Shell and Spatial Structures IASS 2017: Interfaces, Numero 5, 2017
Editore: International Association for Shell and Spatial Structures IASS
DOI: 10.5281/zenodo.2669464

Multi-Machine Fabrication: An Integrative Design Process Utilising an Autonomous UAV and Industrial Robots for the Fabrication of Long Span Composite Structures

Autori: Benjamin Felbrich; Nikolas Früh; Marshall Prado; Saman Saffarian; James Solly; Lauren Vasey; Jan Knippers; Achim Menges
Pubblicato in: ACADIA 2017: Disciplines + Disruption [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA)], pp. . 10.5281/zenodo.2667782, Numero 11, 2017, Pagina/e 248–259
Editore: ACADIA
DOI: 10.5281/zenodo.2667782

Connected Augmented Assembly: Cloud Based Augmented Reality Applications in Architecture

Autori: Lharchi, Ayoub; Ramsgaard Thomsen, Mette; Tamke, Martin
Pubblicato in: Proceedings of the ecaade conference 2020, Numero 5, 2020
Editore: ecaade
DOI: 10.5281/zenodo.3885164

Monolithic Earthen Shells Digital Fabrication: Hybrid Workflow

Autori: Bravo Maite; Chaltiel Stephanie
Pubblicato in: The Design Modelling Symposium 2017, Numero 9, 2017
Editore: Springer
DOI: 10.5281/zenodo.2669408

Towards Assembly Information Modeling (AIM)

Autori: Lharchi, Ayoub; Ramsgaard Thomsen, Mette; Tamke, Martin
Pubblicato in: Proceedings of SimAud 2019, Numero 12, 2019
Editore: Society for Modeling & Simulation International (SCS
DOI: 10.5281/zenodo.2656359

Energy Efficient Design for 3D Printed Earth Architecture

Autori: Dubor, Alexandre; Cabay, Edouard; Chronis, Angelos
Pubblicato in: Humanizing Digital Realities, Numero 4, 2017
Editore: Springer
DOI: 10.5281/zenodo.3266205

Irregular cable-nets: exploring irregularity as a driver for form and structure

Autori: Giachini, PAGS; Al, B.; Solly, J. J.; Slabbinck, E. L. M.
Pubblicato in: Proceedings of the IASS Annual Symposium 2017, Numero 3, 2017, Pagina/e 1-10
Editore: IASS
DOI: 10.5281/zenodo.2625562

The ITECH approach: Building(s) to learn

Autori: Knippers, Jan; Menges, Achim; Dahy, Hanaa; Früh, Nikolas; Groenewolt, Abel; Körner, Axel; Rinderspacher, Katja; Saffarian, Saman; Slabbinck, Evy L. M.; Solly, Jonathan J.; Vasey, Lauren; Wood, Dylan
Pubblicato in: IASS Symposium, Creativity in Structural Design, Numero 20, 2018
Editore: IASS
DOI: 10.5281/zenodo.2625701

Digitally fabricated active-bending beams for the rapid assembly of temporary structures.

Autori: Baseta, Efilena; Bollinger, Klaus
Pubblicato in: Conference: RCA - Research Culture in Architecture: International conference on cross disciplinary collaboration, Numero 1, 2018
Editore: technical University Kaiserslautern, Germany
DOI: 10.5281/zenodo.2625867

Wind-formed Architectural Shapes

Autori: Lenka Kromanikova; Angelos Chronis; Stanislav Kmet; Dušan Katunský
Pubblicato in: proceedings of 36th Annual Conference of ecaade 36th Annual Conference 17th-21st September 2018 Lodz Poland., Numero 20, 2018
Editore: eCAADE
DOI: 10.5281/zenodo.3266186

Integration of CFD in Computational Design - An evaluation of the current state of the art

Autori: Chronis, Angelos; Dubor, Alexandre; Cabay, Edouard; Mostapha Sadeghipour Roudsari
Pubblicato in: proceedings of ecaade 35 - ShoCK! : Sharing of computable knowledge!, Numero 17, 2019
Editore: ecaade
DOI: 10.5281/zenodo.3266214

Structural design methods of component based lattice composites for the Elytra Pavilion

Autori: Koslowski, Valentin; Solly, James; Knippers, Jan
Pubblicato in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’., Numero 21, 2017
Editore: IASS
DOI: 10.5281/zenodo.2677669

Construction System for Reversible Self-Formation of Grid Shells. Correspondence between physical and digital form

Autori: Baseta, Efilena; Bollinger, Klaus
Pubblicato in: Proceedings of the ACADIA Annual Symposium 2018 –Recalibration: on imprecision and infidelity, Numero 1, 2018, Pagina/e 366-375
Editore: Universidad Iberoamericana, Mexico City
DOI: 10.5281/zenodo.2625810

Bio-Inspired Kinetic Curved-Line Folding for Architectural Applications

Autori: Axel Körner; Anja Mader; Saman Saffarian; Jan Knippers
Pubblicato in: Proceedings of ACADIA conference 2017, Numero 8, 2016
Editore: ACADIA
DOI: 10.5281/zenodo.2667788

Torsion as a design driver in plate-bending-active tensile structures

Autori: Slabbinck, Evy L. M.; Körner, Axel; Knippers, Jan
Pubblicato in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’, Numero 2, 2017
Editore: IASS
DOI: 10.5281/zenodo.2625693

ICD/ITKE Research Pavilion 2016/2017 : Integrative Design of a Composite Lattice Cantilever

Autori: Solly, James; Frueh, Nicholas; Saffarian, Saman; Prado, Marshall; Vasey, Lauren; Felbrich, Banjamin; Reist, Daniel; Knippers, Jan; Menges, Achim
Pubblicato in: Creativity in Structural Design: Proceedings of the IASS Symposium 2018, Numero 3, 2018
Editore: IASS
DOI: 10.5281/zenodo.2677664

Conceptual framework for analyzing and designing bending-active tensile hybrid structures

Autori: Slabbinck, Evy L. M.; Suzuki, Seiichi; Solly, Jonathan J.; Mader, Anja; Knippers, Jan
Pubblicato in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’, Numero 3, 2017
Editore: IASS
DOI: 10.5281/zenodo.2625002

Digital Tools Beyond Aesthetics: Mass Creativity and The Enablement of Emergence

Autori: Stefanescu, Dimitrie
Pubblicato in: AAE 2016: Curiosity, Risk, Participation, Numero 14, 2016, Pagina/e 481–489
Editore: UCL The Bartlett, London
DOI: 10.5281/zenodo.3265816

Approximating Climatic Performance using Artificial Neural Networks

Autori: Zeynep, Aksöz; Chadha Kunaljit; Dubor Alexandre; Cabay Edouard
Pubblicato in: Project Catalog of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), Numero 2, 2018
Editore: ACADIA
DOI: 10.5281/zenodo.2668916

IceFormwork for Cast HPFRC Elements: Process-Oriented Design of a Light-Weight High-Performance Fiber-Reinforced Concrete (HPFRC) Rain-Screen Façade

Autori: Sitnikov, Vasily; Eigenraam, Peter; Papanastasis; Wassermann-Fry
Pubblicato in: ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), Numero 1, 2019
Editore: ACADIA
DOI: 10.5281/zenodo.3885265

Modular Coreless Filament Winding For Lightweight Systems In Architecture

Autori: Knippers, Jan; Kowlowski, Valentin; Solly, James; Fildhuth, Timo
Pubblicato in: CICE 2016 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, Numero 2, 2016
Editore: CICE
DOI: 10.5281/zenodo.1063908

A comparative overview of generative approaches for computational form-finding of bending-active tensile structures

Autori: Suzuki, Seiichi; Slabbinck, Evy L. M.; Knippers, Jan
Pubblicato in: Proceedings of the IASS Annual Symposium 2017 ‘Interfaces: architecture.engineering.science’, Numero 5, 2017
Editore: IASS
DOI: 10.5281/zenodo.2625657

Robotic fabrication and earthen shells

Autori: Chaltiel, stephanie; Bravo, Maite
Pubblicato in: CADIA 2017: Disciplines & Disruption Project Exhibition, 2017
Editore: ACADIA
DOI: 10.5281/zenodo.2669436

The Mobility Topography Model for Substantializing and Projecting Transportation in Cities

Autori: Trattner, Z., Chronis, A., Muñoz; A.
Pubblicato in: Proceedings of the 2017 Symposium on Simulation for Architecture and Urban Design (SimAUD 2017), 2017, ISBN 9781-510870185
Editore: Society for Modeling and Simulation International (SCS)
DOI: 10.22360/simaud.2017.simaud.033

Paste matter 3d printing in monolithic shells fabrication methods

Autori: Bravo Maite; Chaltiel Stephanie
Pubblicato in: Kine[SIS]tem International Conference Proceedings. From Nature to Architectural Matter, Numero 1, 2017, Pagina/e Pp.10-18, ISBN 978-989-8862-24-2
Editore: ISCTE – Instituto Universitário de Lisboa
DOI: 10.5281/zenodo.2669468

Early Structure Formation in Concrete with Water-to-Cement Ratio 0.2

Autori: Sitnikov; Sitnikov
Pubblicato in: American Concrete Institute, ACI Special Publication, Numero 2, 2018
Editore: American Concrete Institute, ACI
DOI: 10.5281/zenodo.3938764

Kinetics of UHPC Strength Gain at Subfreezing Temperatures

Autori: Sitnikov; Sitnikov
Pubblicato in: SP-326 Durability and Sustainability of Concrete Structures, Numero 2, 2018
Editore: DSCS, American Concrete Institute, Moscow
DOI: 10.5281/zenodo.3938740

Computational Bamboo: Digital and Vernacular Design Principles for the Construction of a Temporary Bending-Active Structure

Autori: Seiichi Suzuki, Evy L. M. Slabbinck, Jan Knippers
Pubblicato in: Impact: Design With All Senses - Proceedings of the Design Modelling Symposium, Berlin 2019, 2020, Pagina/e 224-236, ISBN 978-3-030-29828-9
Editore: Springer International Publishing
DOI: 10.1007/978-3-030-29829-6_18

Design, analysis and construction of a bending-active tensile hybrid structure

Autori: Slabbinck, Evy L.M.; Suzuki, Seiichi; Mader, Anja; Jonas, Florian A.; Knippers, J.
Pubblicato in: Proceedings of the IASS Annual Symposium 2019 – Structural Membranes 2019: Form and Force, 2019
Editore: IASS
DOI: 10.5281/zenodo.3944657

Unreinforced Elements out of UHPC

Autori: Dr. Sitnikov, I.; MA Sitnikov, V.
Pubblicato in: Concrete Plant International, Numero 2/2017, 2017, Pagina/e 50, ISSN 1862-0205
Editore: ad_media GmbH

Adaptive Strategies for Mud Shell Robotic Fabrication

Autori: Chaltiel Stephanie, Bravo Maite, Ibrahim Abdullah
Pubblicato in: International Journal of Environmental Science & Sustainable Development, Numero 3/2, 2018, Pagina/e 64, ISSN 2357-0857
Editore: IEREK
DOI: 10.21625/essd.v3iss2.382

Novel bending-active system with controllable curvature-stiffness

Autori: Baseta, Efilena
Pubblicato in: Archidoct Journal Numero 6-2, Numero 6-2, 2019, Pagina/e 90-95, ISSN 2309-0103
Editore: enhsa
DOI: 10.5281/zenodo.2625931

Ice Formwork for High-Performance Concrete: A Model of Lean Production for Prefabricated Concrete Industry

Autori: V. Sitnikov
Pubblicato in: Structures, Numero 18, 2019, Pagina/e 109-116, ISSN 2352-0124
Editore: Elsevier Limited
DOI: 10.1016/j.istruc.2018.11.004

Matter-Robotic Calibration for Bioshotcrete

Autori: Maite Bravo; Stephanie Chaltiel; Wilfredo Carazas
Pubblicato in: "Temes de Disseny #34: Material interactions in the human-made Milieu", Numero "#34", 2018, Pagina/e 78-89, ISSN 2604-5230
Editore: Elisava Research
DOI: 10.5281/zenodo.2669134

A Multi-scalar Approach for the Modelling and Fabrication of Free-Form Glue-Laminated Timber Structures

Autori: Tom Svilans, Paul Poinet, Martin Tamke, Mette Ramsgaard Thomsen
Pubblicato in: Humanizing Digital Reality, 2018, Pagina/e 247-257, ISBN 978-981-10-6610-8
Editore: Springer Singapore
DOI: 10.1007/978-981-10-6611-5_22

ELYTRA FILAMENT PAVILION: - ROBOTIC FILAMENT WINDING FOR STRUCTURAL COMPOSITE BUILDING SYSTEMS

Autori: MARSHALL PRADO, MORITZ DÖRSTELMANN, ACHIM MENGES, JAMES SOLLY, JAN KNIPPERS
Pubblicato in: Fabricate 2017, 2017, Pagina/e 224-231, ISBN 9781-787350014
Editore: UCL Press
DOI: 10.2307/j.ctt1n7qkg7.35

Ice Formwork for Ultra-High Performance Concrete: Simulation of Ice Melting Deformations

Autori: Vasily Sitnikov
Pubblicato in: Humanizing Digital Reality, 2018, Pagina/e 395-406, ISBN 978-981-10-6610-8
Editore: Springer Singapore
DOI: 10.1007/978-981-10-6611-5_34

New Workflows for Digital Timber

Autori: Tom Svilans, Martin Tamke, Mette Ramsgaard Thomsen, Jonas Runberger, Kai Strehlke, Martin Antemann
Pubblicato in: Digital Wood Design - Innovative Techniques of Representation in Architectural Design, Numero 24, 2019, Pagina/e 93-134, ISBN 978-3-030-03675-1
Editore: Springer International Publishing
DOI: 10.1007/978-3-030-03676-8_3

Adaptive Robotic Carving - Training Methods for the Integration of Material Performances in Timber Manufacturing

Autori: Giulio Brugnaro, Sean Hanna
Pubblicato in: Robotic Fabrication in Architecture, Art and Design 2018 - Foreword by Sigrid Brell-Çokcan and Johannes Braumann, Association for Robots in Architecture, 2019, Pagina/e 336-348, ISBN 978-3-319-92293-5
Editore: Springer International Publishing
DOI: 10.1007/978-3-319-92294-2_26

Negotiated Materialization: Design Approaches Integrating Wood Heterogeneity Through Advanced Robotic Fabrication

Autori: Giulio Brugnaro, Angelo Figliola, Alexandre Dubor
Pubblicato in: Digital Wood Design - Innovative Techniques of Representation in Architectural Design, Numero 24, 2019, Pagina/e 135-158, ISBN 978-3-030-03675-1
Editore: Springer International Publishing
DOI: 10.1007/978-3-030-03676-8_4

Geometry-Induced System of Controlled Deformations. Application in Self-organized Wooden Gridshell Structures

Autori: Efilena Baseta
Pubblicato in: Digital Wood Design - Innovative Techniques of Representation in Architectural Design, Numero 24, 2019, Pagina/e 719-742, ISBN 978-3-030-03675-1
Editore: Springer International Publishing
DOI: 10.1007/978-3-030-03676-8_28

Design Transactions - Rethinking Information Modelling for a New Material Age

Autori: Sheil, Bob ; Thomsen, Mette Ramsgaard; Tamke, Martin; Hanna, Sean
Pubblicato in: Design Transactions - Rethinking Information Modelling for a New Material Age, 2020, ISBN 9781-787355026
Editore: UCL Press
DOI: 10.5281/zenodo.3938860

È in corso la ricerca di dati su OpenAIRE...

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica