Proposal for a Horizon 2020 Design Study on the “European Plasma Research Accelerator with eXcellence In Applications“ (EuPRAXIA)

Risultati finali

Final report on the governance model. (Task 1.4)

Control Command system design (Task 4.4)

Report defining preliminary study concept

Report defining preliminary study concept, layout and parameters: This report defines a baseline for studies across the various work packages. The common baseline assures that studies are consistent and based on the same assumptions.

Final requirements of the laser system

Final requirements of the laser system (Task 4.1)

Report on state-of-the-art short period undulators

Report on state-of-the-art short period undulators as a basis for the study of the FEL cases

Outreach activities

Report on outreach activities within the project incl. school visits, outreach videos on R&D, contributions to outreach events, etc.

Benchmarking of existing technology and comparison with the requirements

Survey and benchmarking of existing technology and comparison with the requirements (task 4.2)

Final quality assurance plan

Final quality assurance plan: Specifying the definitions and standards used in the project. Describing the guidelines for preparing consistent reports and design estimates in the study. (Task 1.3)

Report on optimal beam handling

It is also necessary to match and diagnose the electron beam in order to deliver high brightness electron beams, with given optical functions (i.e. emittance, Twiss functions) to the plasma channel. The optics of the transfer lines with their performance will be given. Explanations about the made choices will be exposed.

Design report photo-injector

The goal of the simulation campaign is the definition of the best properties of the injected bunch, i.e. charge, separation, bunch length, in order to achieve the best final brightness. Simulations will allow completing the design report for the most suitable RF photo-injector for LWFA scheme, in order to accomplish the most stable and performing acceleration regime and to define the accelerator working point. The main characteristics of the photo-injector will be detailed (i.e. laser characteristics, photocathode, cavities, emittance compensation schemes) and tools for the diagnostics of the required electron beam parameters will be defined.

Final report on the comparative site study

Final report on the comparative site study. (Task 1.4)

Final tolerance analysis

Final tolerance analysis (Tasks 2.3 and 2.4)

Application survey assessment

Application survey and basic feasibility assessment report Based on the collected information and the baseline design of the facility the best match between facility offer and user demand will made.

Final report defining the concept, layout and detailed project parameters

Final report defining the concept, layout and detailed project parameters: This is the numerical result of the design study and is the common basis for the conceptual design report. (Task 1.2)

Specific magnetic elements

Report on specific magnetic elements

FEL Scientific user workshop

Scientific user workshop

Report defining baseline design

Baseline design report including geometric interfaces between laser beam optics, electron beam optics, plasma modules and beam transport to FEL and HEP beam areas. (Task 2.2)

Models, scaling laxs Plasma FEL dynamics

Report on models and scaling laws for Plasma FEL dynamics including comparison with GENESIS simulations

Diagnostic requirements and technical approaches

Report on particular diagnostics requirements and technical approaches

Baseline design HEP user area

Baseline design (beamline and experimental area) The main technical choices for implementing a versatile user area for particle beam application will be out-lined. A limited number of variants will be described. The steps towards proof of feasibility will be identified.

Conceptual design report for EuPRAXIA

Full conceptual design report for EuPRAXIA. This is also the final report of the project, summarizing the work and achievements done over the full project duration. A public version of the report will be made available online. (all tasks)

User mini-workshop

User application survey miniworkshopA one or two day miniworkshop in a central location for identified potential users will be organised at an early stage in order to collect technical information necessary for the design study and add to international visibility of the future facility

Kick-off meeting

Project is set up, web site is published: (Task 1.1) [month 1]

Project final brochure

Project final brochure for dissemination of R&D results

Project leaflet

Project leaflet for distribution internationally

Project initial brochure

Project initial brochure for presentation of research background and project goals

Outreach symposium

Project outreach symposium; international dissemination of published scientific papers and journal articles throughout the lifetime of the project

Project web site

set up a project web site

Pubblicazioni

EuPRAXIA@SPARC_LAB: the high-brightness RF photo-injector layout proposal

Autori: Giribono, A.; Bacci, A.; Chiadroni, E.; Cianchi, A.; Croia, M.; Ferrario, M.; Marocchino, A.; Petrillo, V.; Pompili, R.; Romeo, S.; Conti, M. Rossetti; Rossi, A. R.; Vaccarezza, C.
Pubblicato in: Numero 7, 2017
Editore: arxiv

VisualPIC: A New Data Visualizer and Post-Processor for Particle-in-Cell Codes

Autori: Aßmann, Ralph; Martinez de la Ossa, Alberto; Pousa, Angel Ferran
Pubblicato in: 8th International Particle Accelerator Conference, IPAC2017, Copenhagen, Denmark, 2017-05-14 - 2017-05-19, Numero 47, 2017
Editore: DESY
DOI: 10.3204/PUBDB-2017-10436

External injection into a laser-driven plasma accelerator with sub-femtosecond timing jitter

Autori: A Ferran Pousa, R Assmann, R Brinkmann, A Martinez de la Ossa
Pubblicato in: Journal of Physics: Conference Series, Numero 874, 2017, Pagina/e 012032, ISSN 1742-6588
Editore: Institute of Physics
DOI: 10.1088/1742-6596/874/1/012032

Numerical studies of density transition injection in laser wakefield acceleration

Autori: F Massimo, A F Lifschitz, C Thaury, V Malka
Pubblicato in: Plasma Physics and Controlled Fusion, Numero 59/8, 2017, Pagina/e 085004, ISSN 0741-3335
Editore: Institute of Physics Publishing
DOI: 10.1088/1361-6587/aa717d

Guiding of charged particle beams in curved capillary-discharge waveguides

Autori: R. Pompili, G. Castorina, M. Ferrario, A. Marocchino, A. Zigler
Pubblicato in: AIP Advances, Numero 8/1, 2018, Pagina/e 015326, ISSN 2158-3226
Editore: American Institute of Physics Inc.
DOI: 10.1063/1.5011964

Beam quality preservation studies in a laser-plasma accelerator with external injection for EuPRAXIA

Autori: E. Svystun, R.W. Assmann, U. Dorda, A. Ferran Pousa, T. Heinemann, B. Marchetti, A. Martinez de la Ossa, P.A. Walker, M.K. Weikum, J. Zhu
Pubblicato in: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Numero 909, 2018, Pagina/e 90-94, ISSN 0168-9002
Editore: Elsevier BV
DOI: 10.1016/j.nima.2018.02.060

Frontiers of beam diagnostics in plasma accelerators: Measuring the ultra-fast and ultra-cold

Autori: A. Cianchi, M. P. Anania, F. Bisesto, E. Chiadroni, A. Curcio, M. Ferrario, A. Giribono, A. Marocchino, R. Pompili, J. Scifo, V. Shpakov, C. Vaccarezza, F. Villa, A. Mostacci, A. Bacci, A. R. Rossi, L. Serafini, A. Zigler
Pubblicato in: Physics of Plasmas, Numero 25/5, 2018, Pagina/e 056704, ISSN 1070-664X
Editore: American Institute of Physics
DOI: 10.1063/1.5017847

Beam manipulation for resonant plasma wakefield acceleration

Autori: E. Chiadroni, D. Alesini, M.P. Anania, A. Bacci, M. Bellaveglia, A. Biagioni, F.G. Bisesto, F. Cardelli, G. Castorina, A. Cianchi, M. Croia, A. Gallo, D. Di Giovenale, G. Di Pirro, M. Ferrario, F. Filippi, A. Giribono, A. Marocchino, A. Mostacci, M. Petrarca, L. Piersanti, S. Pioli, R. Pompili, S. Romeo, A.R. Rossi, J. Scifo, V. Shpakov, B. Spataro, A. Stella, C. Vaccarezza, F. Villa
Pubblicato in: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Numero 865, 2017, Pagina/e 139-143, ISSN 0168-9002
Editore: Elsevier BV
DOI: 10.1016/j.nima.2017.01.017

EUPRAXIA@SPARC_LAB: Beam dynamics studies for the X-band Linac

Autori: C. Vaccarezza, D. Alesini, A. Bacci, A. Cianchi, E. Chiadroni, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, A. Latina, A. Marocchino, V. Petrillo, R. Pompili, S. Romeo, M. Rossetti Conti, A.R. Rossi, L. Serafini, B. Spataro
Pubblicato in: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Numero 909, 2018, Pagina/e 314-317, ISSN 0168-9002
Editore: Elsevier BV
DOI: 10.1016/j.nima.2018.01.100

Laser-driven high-quality positron sources as possible injectors for plasma-based accelerators

Autori: Aaron Alejo, Roman Walczak, Gianluca Sarri
Pubblicato in: Scientific Reports, Numero 9/1, 2019, ISSN 2045-2322
Editore: Nature Publishing Group
DOI: 10.1038/s41598-019-41650-y

Hybrid LWFA–PWFA staging as a beam energy and brightness transformer: conceptual design and simulations

Autori: A. Martinez de la Ossa, R. W. Assmann, M. Bussmann, S. Corde, J. P. Couperus Cabadağ, A. Debus, A. Döpp, A. Ferran Pousa, M. F. Gilljohann, T. Heinemann, B. Hidding, A. Irman, S. Karsch, O. Kononenko, T. Kurz, J. Osterhoff, R. Pausch, S. Schöbel, U. Schramm
Pubblicato in: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Numero 377/2151, 2019, Pagina/e 20180175, ISSN 1364-503X
Editore: Royal Society of London
DOI: 10.1098/rsta.2018.0175

High quality electron beam acceleration by ionization injection in laser wakefields with mid-infrared dual-color lasers

Autori: Ming Zeng, Ji Luo, Min Chen, Warren B. Mori, Zheng-Ming Sheng, Bernhard Hidding
Pubblicato in: Physics of Plasmas, Numero 23/6, 2016, Pagina/e 063113, ISSN 1070-664X
Editore: American Institute of Physics
DOI: 10.1063/1.4953895

Single-stage plasma-based correlated energy spread compensation for ultrahigh 6D brightness electron beams

Autori: G. G. Manahan, A. F. Habib, P. Scherkl, P. Delinikolas, A. Beaton, A. Knetsch, O. Karger, G. Wittig, T. Heinemann, Z. M. Sheng, J. R. Cary, D. L. Bruhwiler, J. B. Rosenzweig, B. Hidding
Pubblicato in: Nature Communications, Numero 8, 2017, Pagina/e 15705, ISSN 2041-1723
Editore: Nature Publishing Group
DOI: 10.1038/ncomms15705

Amplification and generation of ultra-intense twisted laser pulses via stimulated Raman scattering

Autori: J. Vieira, R. M. G. M. Trines, E. P. Alves, R. A. Fonseca, J. T. Mendonça, R. Bingham, P. Norreys, L. O. Silva
Pubblicato in: Nature Communications, Numero 7, 2016, Pagina/e 10371, ISSN 2041-1723
Editore: Nature Publishing Group
DOI: 10.1038/ncomms10371

Effects of small misalignments on the intensity and Strehl ratio for a laser beam focused by an off-axis parabola

Autori: Luca Labate, Paolo Ferrara, Lorenzo Fulgentini, Leonida A. Gizzi
Pubblicato in: Applied Optics, Numero 55/23, 2016, Pagina/e 6506, ISSN 0003-6935
Editore: Optical Society of America
DOI: 10.1364/AO.55.006506

A compact tunable polarized X-ray source based on laser-plasma helical undulators

Autori: J. Luo, M. Chen, M. Zeng, J. Vieira, L. L. Yu, S. M. Weng, L. O. Silva, D. A. Jaroszynski, Z. M. Sheng, J. Zhang
Pubblicato in: Scientific Reports, Numero 6/1, 2016, ISSN 2045-2322
Editore: Nature Publishing Group
DOI: 10.1038/srep29101

Note: Real-time monitoring via second-harmonic interferometry of a flow gas cell for laser wakefield acceleration

Autori: F. Brandi, F. Giammanco, F. Conti, F. Sylla, G. Lambert, L. A. Gizzi
Pubblicato in: Review of Scientific Instruments, Numero 87/8, 2016, Pagina/e 086103, ISSN 0034-6748
Editore: American Institute of Physics
DOI: 10.1063/1.4960399

Comparisons of time explicit hybrid kinetic-fluid code Architect for Plasma Wakefield Acceleration with a full PIC code

Autori: F. Massimo, S. Atzeni, A. Marocchino
Pubblicato in: Journal of Computational Physics, Numero 327, 2016, Pagina/e 841-850, ISSN 0021-9991
Editore: Academic Press
DOI: 10.1016/j.jcp.2016.09.067

Laser-driven high-quality positron sources as possible injectors for plasma-based accelerators

Autori: Alejo, Aaron; Walczak, Roman; Sarri, Gianluca
Pubblicato in: Numero 3, 2018
Editore: arxiv.org

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica