Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Project Information

Bionic Aircraft

Grant agreement ID: 690689

DOI

10.3030/690689

Project closed

EC signature date 10 June 2016

Start date 1 September 2016

End date 31 August 2019

Funded under

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Total cost

€ 7 968 812,00

EU contribution

€ 6 441 062,00

Coordinated by

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Deliverables

Websites, patent fillings, videos etc. (2)

Project website
Leaflet, posters and brochures

initial Version: M6 updates/follow up material: M12, M18, M24, M30, M36

Documents, reports (2)

Pre-exploitation Plan for each partner
Report on the contribution to the standardization system

Publications

Conference proceedings (9)

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Author(s): Ph. Imgrund
Published in: AM-Motion European Strategic Approach on Additive Manufacturing, 2017
Publisher: AM-Motion Network

New high-strength Aluminium Alloys and Bionic Design for the SLM Process

Author(s): F. Teng, M. Gralow
Published in: Symposium on resource efficient manufacturing of functional components made of technical metals, 2017
Publisher: Hochschule Pforzheim

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Author(s): Ph. Imgrund
Published in: The Bionic Network Event 2017, 2017
Publisher: The Bionic Network Event

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Author(s): Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; Atxaga, G.; Perez, J.; Rubio, J.
Published in: Proceedings of AEND 2019, Issue 1, 2019
Publisher: Spanish Society for Nondestructive Testing

Optimization of the Laser Additive Manufacturing Process by Beam Shaping

Author(s): T. Wischeropp, D. Jutkuhn
Published in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Publisher: Council of European Aerospace Societies (CEAS)

Repair of Al components by low temperature high velocity combustion spraying for aeronautic applications

Author(s): M. Parco, A. Gomez, I. Fagoaga, G. Barykin, C. Vaquero
Published in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Publisher: Council of European Aerospace Societies (CEAS)

Innovative workflow for bionic design and structural optimization of ALM parts

Author(s): J. Michael
Published in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Publisher: Council of European Aerospace Societies (CEAS)

Bionic Aircraft- Enhancing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Author(s): Ph. Imgrund
Published in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Publisher: Council of European Aerospace Societies (CEAS)

Innovative in-process and in-line quality assurance systems for additive layer manufacturing

Author(s): S. Ruffa, S. Meile
Published in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Publisher: Council of European Aerospace Societies (CEAS)

Peer reviewed articles (1)

Measurement of actual powder layer height and packing density in a single layer in selective laser melting

Author(s): Tim Marten Wischeropp, Claus Emmelmann, Milan Brandt, Aaron Pateras
Published in: Additive Manufacturing, Issue 28, 2019, Page(s) 176-183, ISSN 2214-8604
Publisher: Elsevier BV
DOI: 10.1016/j.addma.2019.04.019