Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Projektinformationen

Bionic Aircraft

ID Finanzhilfevereinbarung: 690689

DOI 10.3030/690689

Projekt abgeschlossen

EK-Unterschriftsdatum 10 Juni 2016

Startdatum 1 September 2016

Enddatum 31 August 2019

Finanziert unter

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Gesamtkosten € 7 968 812,00

EU-Beitrag € 6 441 062,00

Koordiniert durch

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

Leistungen

Websites, patent fillings, videos etc. (2)

Project website
Leaflet, posters and brochures

initial Version: M6 updates/follow up material: M12, M18, M24, M30, M36

Documents, reports (2)

Pre-exploitation Plan for each partner
Report on the contribution to the standardization system

Veröffentlichungen

Conference proceedings (9)

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autoren: Ph. Imgrund
Veröffentlicht in: AM-Motion European Strategic Approach on Additive Manufacturing, 2017
Herausgeber: AM-Motion Network

New high-strength Aluminium Alloys and Bionic Design for the SLM Process

Autoren: F. Teng, M. Gralow
Veröffentlicht in: Symposium on resource efficient manufacturing of functional components made of technical metals, 2017
Herausgeber: Hochschule Pforzheim

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autoren: Ph. Imgrund
Veröffentlicht in: The Bionic Network Event 2017, 2017
Herausgeber: The Bionic Network Event

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Autoren: Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; Atxaga, G.; Perez, J.; Rubio, J.
Veröffentlicht in: Proceedings of AEND 2019, Ausgabe 1, 2019
Herausgeber: Spanish Society for Nondestructive Testing

Optimization of the Laser Additive Manufacturing Process by Beam Shaping

Autoren: T. Wischeropp, D. Jutkuhn
Veröffentlicht in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Herausgeber: Council of European Aerospace Societies (CEAS)

Repair of Al components by low temperature high velocity combustion spraying for aeronautic applications

Autoren: M. Parco, A. Gomez, I. Fagoaga, G. Barykin, C. Vaquero
Veröffentlicht in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Herausgeber: Council of European Aerospace Societies (CEAS)

Innovative workflow for bionic design and structural optimization of ALM parts

Autoren: J. Michael
Veröffentlicht in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Herausgeber: Council of European Aerospace Societies (CEAS)

Bionic Aircraft- Enhancing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autoren: Ph. Imgrund
Veröffentlicht in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Herausgeber: Council of European Aerospace Societies (CEAS)

Innovative in-process and in-line quality assurance systems for additive layer manufacturing

Autoren: S. Ruffa, S. Meile
Veröffentlicht in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Herausgeber: Council of European Aerospace Societies (CEAS)

Peer reviewed articles (1)

Measurement of actual powder layer height and packing density in a single layer in selective laser melting

Autoren: Tim Marten Wischeropp, Claus Emmelmann, Milan Brandt, Aaron Pateras
Veröffentlicht in: Additive Manufacturing, Ausgabe 28, 2019, Seite(n) 176-183, ISSN 2214-8604
Herausgeber: Elsevier BV
DOI: 10.1016/j.addma.2019.04.019