Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Informations projet

Bionic Aircraft

N° de convention de subvention: 690689

DOI 10.3030/690689

Projet clôturé

Date de signature de la CE 10 Juin 2016

Date de début 1 Septembre 2016

Date de fin 31 Août 2019

Financé au titre de

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coût total € 7 968 812,00

Contribution de l’UE € 6 441 062,00

Coordonné par

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

Livrables

Websites, patent fillings, videos etc. (2)

Project website
Leaflet, posters and brochures

initial Version: M6 updates/follow up material: M12, M18, M24, M30, M36

Documents, reports (2)

Pre-exploitation Plan for each partner
Report on the contribution to the standardization system

Publications

Conference proceedings (9)

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Auteurs: Ph. Imgrund
Publié dans: AM-Motion European Strategic Approach on Additive Manufacturing, 2017
Éditeur: AM-Motion Network

New high-strength Aluminium Alloys and Bionic Design for the SLM Process

Auteurs: F. Teng, M. Gralow
Publié dans: Symposium on resource efficient manufacturing of functional components made of technical metals, 2017
Éditeur: Hochschule Pforzheim

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Auteurs: Ph. Imgrund
Publié dans: The Bionic Network Event 2017, 2017
Éditeur: The Bionic Network Event

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Auteurs: Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; Atxaga, G.; Perez, J.; Rubio, J.
Publié dans: Proceedings of AEND 2019, Numéro 1, 2019
Éditeur: Spanish Society for Nondestructive Testing

Optimization of the Laser Additive Manufacturing Process by Beam Shaping

Auteurs: T. Wischeropp, D. Jutkuhn
Publié dans: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Éditeur: Council of European Aerospace Societies (CEAS)

Repair of Al components by low temperature high velocity combustion spraying for aeronautic applications

Auteurs: M. Parco, A. Gomez, I. Fagoaga, G. Barykin, C. Vaquero
Publié dans: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Éditeur: Council of European Aerospace Societies (CEAS)

Innovative workflow for bionic design and structural optimization of ALM parts

Auteurs: J. Michael
Publié dans: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Éditeur: Council of European Aerospace Societies (CEAS)

Bionic Aircraft- Enhancing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Auteurs: Ph. Imgrund
Publié dans: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Éditeur: Council of European Aerospace Societies (CEAS)

Innovative in-process and in-line quality assurance systems for additive layer manufacturing

Auteurs: S. Ruffa, S. Meile
Publié dans: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Éditeur: Council of European Aerospace Societies (CEAS)

Peer reviewed articles (1)

Measurement of actual powder layer height and packing density in a single layer in selective laser melting

Auteurs: Tim Marten Wischeropp, Claus Emmelmann, Milan Brandt, Aaron Pateras
Publié dans: Additive Manufacturing, Numéro 28, 2019, Page(s) 176-183, ISSN 2214-8604
Éditeur: Elsevier BV
DOI: 10.1016/j.addma.2019.04.019