Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Información del proyecto

Bionic Aircraft

Identificador del acuerdo de subvención: 690689

DOI 10.3030/690689

Proyecto cerrado

Fecha de la firma de la CE 10 Junio 2016

Fecha de inicio 1 Septiembre 2016

Fecha de finalización 31 Agosto 2019

Financiado con arreglo a

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coste total € 7 968 812,00

Aportación de la UE € 6 441 062,00

Coordinado por

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

Resultado final

Websites, patent fillings, videos etc. (2)

Project website
Leaflet, posters and brochures

initial Version: M6 updates/follow up material: M12, M18, M24, M30, M36

Documents, reports (2)

Pre-exploitation Plan for each partner
Report on the contribution to the standardization system

Publicaciones

Conference proceedings (9)

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autores: Ph. Imgrund
Publicado en: AM-Motion European Strategic Approach on Additive Manufacturing, 2017
Editor: AM-Motion Network

New high-strength Aluminium Alloys and Bionic Design for the SLM Process

Autores: F. Teng, M. Gralow
Publicado en: Symposium on resource efficient manufacturing of functional components made of technical metals, 2017
Editor: Hochschule Pforzheim

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autores: Ph. Imgrund
Publicado en: The Bionic Network Event 2017, 2017
Editor: The Bionic Network Event

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Autores: Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; Atxaga, G.; Perez, J.; Rubio, J.
Publicado en: Proceedings of AEND 2019, Edición 1, 2019
Editor: Spanish Society for Nondestructive Testing

Optimization of the Laser Additive Manufacturing Process by Beam Shaping

Autores: T. Wischeropp, D. Jutkuhn
Publicado en: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editor: Council of European Aerospace Societies (CEAS)

Repair of Al components by low temperature high velocity combustion spraying for aeronautic applications

Autores: M. Parco, A. Gomez, I. Fagoaga, G. Barykin, C. Vaquero
Publicado en: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editor: Council of European Aerospace Societies (CEAS)

Innovative workflow for bionic design and structural optimization of ALM parts

Autores: J. Michael
Publicado en: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editor: Council of European Aerospace Societies (CEAS)

Bionic Aircraft- Enhancing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autores: Ph. Imgrund
Publicado en: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editor: Council of European Aerospace Societies (CEAS)

Innovative in-process and in-line quality assurance systems for additive layer manufacturing

Autores: S. Ruffa, S. Meile
Publicado en: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editor: Council of European Aerospace Societies (CEAS)

Peer reviewed articles (1)

Measurement of actual powder layer height and packing density in a single layer in selective laser melting

Autores: Tim Marten Wischeropp, Claus Emmelmann, Milan Brandt, Aaron Pateras
Publicado en: Additive Manufacturing, Edición 28, 2019, Página(s) 176-183, ISSN 2214-8604
Editor: Elsevier BV
DOI: 10.1016/j.addma.2019.04.019