Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Informazioni relative al progetto

Bionic Aircraft

ID dell’accordo di sovvenzione: 690689

DOI 10.3030/690689

Progetto chiuso

Data della firma CE 10 Giugno 2016

Data di avvio 1 Settembre 2016

Data di completamento 31 Agosto 2019

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale € 7 968 812,00

Contributo UE € 6 441 062,00

Coordinato da

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

Risultati finali

Websites, patent fillings, videos etc. (2)

Project website
Leaflet, posters and brochures

initial Version: M6 updates/follow up material: M12, M18, M24, M30, M36

Documents, reports (2)

Pre-exploitation Plan for each partner
Report on the contribution to the standardization system

Pubblicazioni

Conference proceedings (9)

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autori: Ph. Imgrund
Pubblicato in: AM-Motion European Strategic Approach on Additive Manufacturing, 2017
Editore: AM-Motion Network

New high-strength Aluminium Alloys and Bionic Design for the SLM Process

Autori: F. Teng, M. Gralow
Pubblicato in: Symposium on resource efficient manufacturing of functional components made of technical metals, 2017
Editore: Hochschule Pforzheim

BionicAircraft - Increasing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autori: Ph. Imgrund
Pubblicato in: The Bionic Network Event 2017, 2017
Editore: The Bionic Network Event

IN-SERVICE INSPECTION OF AERONAUTICS PARTS PRODUCED BY ADDITIVE LAYER MANUFACTURING (ALM) - in the framework of Bionic Aircraft project (GA nº 690689)

Autori: Galarza, N.; Rubio, B.; Bereziartua, A.; Lozano, I.; Gascon, Jaime; Atxaga, G.; Perez, J.; Rubio, J.
Pubblicato in: Proceedings of AEND 2019, Numero 1, 2019
Editore: Spanish Society for Nondestructive Testing

Optimization of the Laser Additive Manufacturing Process by Beam Shaping

Autori: T. Wischeropp, D. Jutkuhn
Pubblicato in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editore: Council of European Aerospace Societies (CEAS)

Repair of Al components by low temperature high velocity combustion spraying for aeronautic applications

Autori: M. Parco, A. Gomez, I. Fagoaga, G. Barykin, C. Vaquero
Pubblicato in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editore: Council of European Aerospace Societies (CEAS)

Innovative workflow for bionic design and structural optimization of ALM parts

Autori: J. Michael
Pubblicato in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editore: Council of European Aerospace Societies (CEAS)

Bionic Aircraft- Enhancing resource efficiency of aviation through implementation of ALM technology and bionic design in all stages of an aircraft life cycle

Autori: Ph. Imgrund
Pubblicato in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editore: Council of European Aerospace Societies (CEAS)

Innovative in-process and in-line quality assurance systems for additive layer manufacturing

Autori: S. Ruffa, S. Meile
Pubblicato in: 8th EASN - CEAS International Conference on Manufacturing for Growth & Innovation, 2018
Editore: Council of European Aerospace Societies (CEAS)

Peer reviewed articles (1)

Measurement of actual powder layer height and packing density in a single layer in selective laser melting

Autori: Tim Marten Wischeropp, Claus Emmelmann, Milan Brandt, Aaron Pateras
Pubblicato in: Additive Manufacturing, Numero 28, 2019, Pagina/e 176-183, ISSN 2214-8604
Editore: Elsevier BV
DOI: 10.1016/j.addma.2019.04.019