NDTonAIR: Training Network in Non-Destructive Testing and Structural Health Monitoring of Aircraft structures

Risultati finali

Develop simulation models for multiple layer composite using EC and EC thermography

Report on the simulation models developed for multiple layer composite inspection using EC and EC thermography.

Development of imaging and classification algorithms for a single-probe EC sensor

Report on imaging and classification algorithms developed for a single-probe EC sensor

Technologies to detect the presence and to estimate the amount of liquid water in fuel tanks

Report on the investigation of new physical phenomena and sensors to face the problems of the detection of liquid water in fuel tanks and of the estimation of the water amount

Technologies to detect the presence and to estimate the position of ice in fuel tanks

Report on the investigation and development of innovative sensors and techniques for the detection of exact location of ice in the aircraft fuel tank for avoiding misreading of fuel quantity and the risk of tank cracks

Application of Thermal Reconstruction Methods on real samples with various heating sources

Compare experimental results and simulations on semi-transparent samples and on opaque samples; test experimentally various excitation methods, like vibrothermography technique or inductive heating

Determine the relations between parameters of UT, EM and TH signals and bonding quality

Report on the analysis of the relations between parameters of UT, EM and TH signals and bonding quality

Performance measures of demonstrator: POD Vs defect characteristics

Report on the analysis of the performance measures of demonstrator: POD Vs defect characteristics

Report of probability of detection of proposed methods and comparison of the proposed methods and other methods from relevant ESRs

Report on (1) model-based quantitative NDE of different defects such as impact damage, delamination, and cracks for EC and ECPT with the help of coded excitation and signal processing; (2) automatic algorithms for defect detection, classification and quantification.

Performance of a combined CI-GW system for testing aerospace industrial samples

Report on the analysis of the performance of a combined CI-GW system for testing aerospace industrial samples

Modelling FPSH transducer

Report on the modelling of Piezoelectric Fibre Patch Shear Wave transducers that will be realized in various forms and adapted to plate like structures from various aerospace construction materials (CFRP, aluminium, glare, …).

Report on the application of EMAT GW- UT on composites

Report on the application of EMAT GW- UT on composites through temporaly attaching aluminium foil using viscoelastic grease in the area where waves are generated or detected.

Development of a GW-UT system for testing composite panels from a remote location

Report on the development of a GW-UT system for testing composite panels from a remote location

Multiple parameter and feature extraction for characterisation of stress and material states with EC and Magnetic techniques

Report on the procedure developed for the characterisation of stress and material states with EC and Magnetic techniques by multiple parameters analysis and feature extraction

Extraction of TOEC from nonlinear Rayleigh wave measurements (concept and modelling) and comparison with literature values (only virgin samples)

Report on the procedure developed to extraction the Third Order Elastic Constants from nonlinear Rayleigh wave measurements (concept and modelling) and on the comparison of the results with literature values referred to only virgin samples)

Extension of the semi-analytical model to high-frequency regime for CFRP inspection

Report on the extension of the platform for semi-analytical modelling of Eddy Current Testing developed by CEA to the modelling of Carbon Fibre Reinforced Composite structures.

Quantitative comparison and fusion based on POD, image correlation and wavelet analysis of Optical and Thermal images

Report of quantitative comparison and fusion based on POD, image correlation and wavelet analysis of Optical and Thermal images.

Development of imaging protocols for near- and far- field imaging with Pulse-Compression Phased-Array UT

Reporto on the algorithms developed for near- and far- field imaging with Pulse-Compression Phased-Array UT

Develop model based quantitative NDT for EC and EC-TH with coded-excitation

Report on the extension of the models developed for EC and EC thermography inspections of multiple layer composite (D2.4) to the use of coded-excitation and pulse-compression

UT field simulation and code optimization for Pulse-Compression Phased-Array

Report on the codes developed for simulating the UT field for Pulse-Compression Phased-Array applications and on the optimization of the coded waveforms used

Pulsed EC and EC pulsed Thermography simulation models for multiple layer CFPR

Report on the design and the development of simulation models for multiple layer composite using EC and eddy current pulsed thermography (EC-TH);

Development of a semi-analytical model for the EC inspection of complex metallic pieces with arbitrary 3D shape

Report on the development of fast semi-analytics simulation tools for eddy current testing inspections in adapted curvilinear coordinates systems involving pieces with complex 3D geometries

Experimental measurement of UT field using laser interferometry and air coupled techniques

Report on (1) the use of laser interferometry for imaging of the ultrasonic guided wave in composite plates and (2) the possibilities to combine the air-coupled ultrasonics and laser interferometry for the detection of defect in composite laminates;

Signal processing on data from EMAT GW Demonstrator on industrial components

Report on signal processing algorithms applied to data collected with a EMAT GW Demonstrator on industrial components.

Modelling of measured thermal signals in case of arbitrary excitation and for opaque and semi-transparent samples

Report on the developed models to calculate the thermodynamic limits of spatial resolution as a function of depth for different excitation patterns among which coded excitation, by using different boundary conditions and bytaking into account the influence of the noise

Realization of a structure with embedded/surface mounted FPSH

A demonstrator (structure object with defect) will be set up at the final step of the project to demonstrate the advantage of the FPSH transducer concept and the operation of the transducer will be characterized by 3D-vector vibrometry

Development of a demonstrator system for testing bonding quality

Development of a demonstrator system for testing bonding quality with different NDT techniques

Optimization of automatic detection and classification algorithms on real defects for EC

Realization of a demonstrator consisting of a sensor and of a software for the automatic detection and classification algorithms on real defects for EC.

Demonstrator of a UT field measuring based on laser interferometry and AC-UT

Realization of a demonstrator to carry out the experiments on different types of composite plates and estimation of the sensitivity, accuracy and resolution of the defect detection

Demonstrator of SHM device based on piezo-electrically generated and piezo-electrically or fiber-based detected ultrasound, mounted on a benchmark sample under fatigue

Realization of a demonstrator of a SHM device based on piezo-electrically generated and piezo-electrically or fiber-based detected ultrasound, mounted on a benchmark sample under fatigue

Demonstrator of full-field optical and thermography inspection tool

Realization of a demonstrator of full-field optical and thermography inspection tool

Training Event n°5

Training school [CSK1-2] Project management and Intellectual Property

European Researchers' Night 2017

Participation of the ESRs to the European Researchers' Night 2017 to present the aims and the results of the NDTonAIR project and the importance of NDT and SHM

2nd Workshop + Meeting with China Scholarship Council scholars and student

Workshop on Innovative Sensors for NDT and SHM and Meeting with China Scholarship Council

1st Workshop

Workshop and Industrial Seminar on Modelling

4th Workshop

Workshop on Structural and Prognostic Health Monitoring and Aircraft maintenance

Optional 1st and 2nd Recruitment Event

In case at the end of the 4th month the number of ESR recruited should be below a threshold defined by the Supervisory Board, a Recruitiing meeting will be organized and advertised. As a further option this event can be replicated in the 7th month if issues in recruitment should persist.

Training Event N°6

Scientific School-[SK3a-b] Signal and Image Processing

5th Workshop

Workshop on Comparison, Integration & Fusion of NDT techniques

European Researchers' Night 2018

Participation of the ESRs to the European Researchers' Night 2018 to present the aims and the results of the NDTonAIR project and the importance of NDT and SHM

3rd Workshop

Workshop on Ultrasonic Imaging

Advertising of Recruitment

Advertising of Recruitment of the ESR through EURAXESS, the NDTonAIR website, and through individual advertising channels of each Beneficiaries

Young Researchers Conference

Young Researcher Conference -YRC. Eeach ESR will present his work to the others. Some PhD/ESR from other project will be invited. YRC will Include also Invited Seminars on “Case Studies in Nondestructive Testing and Evaluation” and visit at RECENDT Laboratories

Training Event N°4

Scientific School-[SK2a-b] Sensor design and Data-Acquisition Systems

Training Event N°2

Scientific School-[SK1a-b]: “EM, Acoustic theory & Modelling”

Final International Conference

International Conference promoted by the consortium to disseminate the NDTonAIR project results and to interact with EU and non-EU research groups and companies active on NDT and SHM for aircraft

Training Event N°8

Scientific School-[SK4a] Statistical Data Analysis, POD, + Scientific School-[SK4b] Automatic detection, Information Fusion, POD

Project Manager Recruitment and Web-site of the project

Realization of the web-site of the project and Recruitment of the Project Manager

European Researchers' Night 2019

Participation of the ESRs to the European Researchers' Night 2017 to present the aims and the results of the NDTonAIR project and the importance of NDT and SHM

PhD Awarding

Dissertation and PhD awarding for ESRs enrolled in PhD programs (expected for all the ESRs)

Training Event N°7

Training school [CSK2-3] Entrepreneurial training

Training Event N°3

Scientific School -[SK1c]: Material Science, Vibrometry and Thermal Theory

Pubblicazioni

Multi-spectral near infrared NDE of polymer composites

Autori: Senni, Luca; Laureti, Stefano; Rizwan, Muhammad Khalid; Burrascano, Pietro; Hutchins, David A.; Davis, Lee. A. J.; Ricci, Marco
Pubblicato in: NDT & E International, Numero 102, 2019, Pagina/e 281-286, ISSN 0963-8695
Editore: Elsevier BV
DOI: 10.5281/zenodo.4432042

New features for delamination depth evaluation in carbon fiber reinforced plastic materials using eddy current pulse-compression thermography

Autori: Yi, Qiuji; Tian, Gui Yun; Malekmohammadi, Hamed; Zhu, Junzhen; Laureti, Stefano; Ricci, Marco
Pubblicato in: NDT & E International, 2019, Pagina/e 264-273, ISSN 0963-8695
Editore: Elsevier BV
DOI: 10.5281/zenodo.4431611

Direct measurements of Rayleigh wave acoustoelastic constants for shot-peened superalloys

Autori: Gartsev, Sergey; Köhler, Bernd
Pubblicato in: NDT & E International, 2020, ISSN 0963-8695
Editore: Elsevier BV
DOI: 10.5281/zenodo.3757101

Delamination Detection in Polymeric Ablative Materials Using Pulse-Compression Thermography and Air-Coupled Ultrasound

Autori: Stefano Laureti, Muhammad Khalid Rizwan, Hamed Malekmohammadi, Pietro Burrascano, Maurizio Natali, Luigi Torre, Marco Rallini, Ivan Puri, David Hutchins, Marco Ricci
Pubblicato in: Sensors, Numero 19/9, 2019, Pagina/e 2198, ISSN 1424-8220
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s19092198

Experimental Study of the Guided Wave Directivity Patterns of Thin Removable Magnetostrictive Patches

Autori: Akram Zitoun, Steven Dixon, Graham Edwards, David Hutchins
Pubblicato in: Sensors, Numero 20/24, 2020, Pagina/e 7189, ISSN 1424-8220
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20247189

Evaluation of Bonding Quality with Advanced Nondestructive Testing (NDT) and Data Fusion

Autori: Bengisu Yilmaz, Abdoulaye Ba, Elena Jasiuniene, Huu-Kien Bui, Gérard Berthiau
Pubblicato in: Sensors, Numero 20/18, 2020, Pagina/e 5127, ISSN 1424-8220
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s20185127

Comparison of optimisation strategies for the improvement of depth detection capability of Pulse-Compression Thermography

Autori: H. Malekmohammadi, S. Laureti, P. Burrascano, M. Ricci
Pubblicato in: Quantitative InfraRed Thermography Journal, Numero 17/1, 2020, Pagina/e 26-39, ISSN 1768-6733
Editore: Taylor & Francis
DOI: 10.1080/17686733.2019.1603824

Ultrasonic Imaging of Thick Carbon Fiber Reinforced Polymers through Pulse-Compression-Based Phased Array

Autori: Muhammad Khalid Rizwan, Stefano Laureti, Hubert Mooshofer, Matthias Goldammer, Marco Ricci
Pubblicato in: Applied Sciences, Numero 11/4, 2021, Pagina/e 1508, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app11041508

Using Acoustic Emission Measurements for Ice-Melting Detection

Autori: Michael Stamm, Helge Pfeiffer, Johan Reynaert, Martine Wevers
Pubblicato in: Applied Sciences, Numero 9/24, 2019, Pagina/e 5387, ISSN 2076-3417
Editore: MPDI
DOI: 10.3390/app9245387

In-Plane Heatwave Thermography as Digital Inspection Technique for Fasteners in Aircraft Fuselage Panels

Autori: Michael Stamm, Peter Krüger, Helge Pfeiffer, Bernd Köhler, Johan Reynaert, Martine Wevers
Pubblicato in: Applied Sciences, Numero 11/1, 2021, Pagina/e 132, ISSN 2076-3417
Editore: MDPI Applied Sciences
DOI: 10.3390/app11010132

Improved SH0 Guided Wave Transducers Based on Piezoelectric Fiber Patches

Autori: Kim, Gaul, Köhler
Pubblicato in: Sensors, Numero 19/13, 2019, Pagina/e 2990, ISSN 1424-8220
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s19132990

A mode-switchable guided elastic wave transducer

Autori: Köhler, Bernd; Kim, Yongtak; Chwelatiuk, Konad; Tschöke, Kilian; Schubert, Frank; Schubert, Lars
Pubblicato in: Journal of Nondestructive Evaluation, Springer, Numero 39, 45, 2020, ISSN 0195-9298
Editore: Kluwer Academic/Plenum Publishers
DOI: 10.5281/zenodo.3767042

Evaluation of debonding in CFRP-epoxy adhesive single-lap joints using eddy current pulse-compression thermography

Autori: Q. Yi, G.Y. Tian, B. Yilmaz, H. Malekmohammadi, S. Laureti, M. Ricci, E. Jasiuniene
Pubblicato in: Composites Part B: Engineering, Numero 178, 2019, Pagina/e 107461, ISSN 1359-8368
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.compositesb.2019.107461

Quantitative Evaluation of Crack Depths on Thin Aluminum Plate Using Eddy Current Pulse-Compression Thermography

Autori: Qiuji Yi, Hamed Malekmohammadi, Gui Yun Tian, Stefano Laureti, Marco Ricci
Pubblicato in: IEEE Transactions on Industrial Informatics, Numero 16/6, 2020, Pagina/e 3963-3973, ISSN 1551-3203
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/TII.2019.2943669

A Comparison of Feature Extraction Techniques for Delamination of CFRP Using Eddy Current Pulse-Compression Thermography

Autori: X. Lu, Q. Yi, G. Y. Tian
Pubblicato in: IEEE Sensors Journal, Numero 20/20, 2020, Pagina/e 12415-12422, ISSN 1530-437X
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jsen.2020.2993154

Comparison of time and frequency domain features’ immunity against lift-off in pulse-compression eddy current imaging

Autori: Ferrigno, Luigi; Laracca, Marco; Malekmohammadi, Hamed; Tian, Gui Yun; Ricci, Marco
Pubblicato in: NDT & E International, 2019, Pagina/e 102152, ISSN 0963-8695
Editore: Elsevier BV
DOI: 10.5281/zenodo.3778071

The Fast Computation of Eddy Current Distribution and Probe Response in Homogenized Composite Material Based on Semi-Analytical Approach

Autori: Chebbi, Houssem; Prémel, Denis
Pubblicato in: European Physical Journal: Applied Physics, EDP Sciences, Numero 89,1, 2020, Pagina/e 10901, ISSN 1286-0042
Editore: EDP Sciences
DOI: 10.5281/zenodo.3678141

Contextual Application of Pulse-Compression and Multi-frequency Distance-Gain Size Analysis in Ultrasonic Inspection of Forging

Autori: M. K. Rizwan, L. Senni, P. Burrascano, S. Laureti, M. Goldammer, H. Mooshofer, R. Borgna, S. Neri, M. Ricci
Pubblicato in: Journal of Nondestructive Evaluation, Numero 38/3, 2019, ISSN 0195-9298
Editore: Kluwer Academic/Plenum Publishers
DOI: 10.1007/s10921-019-0612-7

A Review on Nondestructive Techniques and Characteristics of Composite Materials for the Aerospace System

Autori: Jaishree Vyas, Rymantas Jonas Kažys
Pubblicato in: MATEC Web of Conferences, Numero 233, 2018, Pagina/e 00003, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201823300003

Simulation of induction thermography NDT technique using SIBC

Autori: Abdoulaye Ba, Huu Kien Bui, Gérard Berthiau, Didier Trichet, Guillaume Wasselynck
Pubblicato in: COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Numero ahead-of-print/ahead-of-print, 2020, ISSN 0332-1649
Editore: Emerald Group Publishing Ltd.
DOI: 10.1108/COMPEL-01-2020-0007

Advanced ultrasonic NDT for weak bond detection in composite-adhesive bonded structures

Autori: Bengisu Yılmaz, Elena Jasiūnienė
Pubblicato in: International Journal of Adhesion and Adhesives, Numero 102, 2020, Pagina/e 102675, ISSN 0143-7496
Editore: Elsevier BV
DOI: 10.1016/j.ijadhadh.2020.102675

Air-Coupled, Contact, and Immersion Ultrasonic Non-Destructive Testing: Comparison for Bonding Quality Evaluation

Autori: Bengisu Yilmaz, Aadhik Asokkumar, Elena Jasiūnienė, Rymantas Jonas Kažys
Pubblicato in: Applied Sciences, Numero 10/19, 2020, Pagina/e 6757, ISSN 2076-3417
Editore: MDPI
DOI: 10.3390/app10196757

Pulse compression based phased array ultrasonic inspection: Optimization of the system and the code selection

Autori: Muhammad Khalid Rizwan, Stefano Laureti, Pietro Burrascano, Matteo Giovannetti, Andrea Cellai, Richard Watson, David Hutchins, Marco Ricci
Pubblicato in: 2019 International Congress on Ultrasonics, 2020, Pagina/e 055013
Editore: ASA
DOI: 10.1121/2.0001147

Eddy-Current Pulsed Thermography for the Detection of Impact Damage on CFRP

Autori: Abdoulaye Ba, Huu Kien Bui, Gerard Berthiau, Qiuji Yi, Junzhen ZHU, Gui Yun Tian
Pubblicato in: 11th International Symposium on NDT in Aerospace, Nov 2019, Paris-Saclay, France (AeroNDT 2019), 2019
Editore: ndt.net

Applying features of nonlinear ultrasonic modulation for defect detection in vibrating structures

Autori: Sevilia SUNETCHIIEVA, Helge PFEIFFER, Sebastiaan CRETEN, Christ GLORIEUX, Martine WEVERS
Pubblicato in: 10th International Symposium on NDT in Aerospace, 2018
Editore: ndt.net
DOI: 10.5281/zenodo.4378566

Comparison of optimization strategies for the improvement of depth detection capability of Pulse Compression Thermography

Autori: Malekmohammadi Hamed; Laureti, Stefano; Senni, Luca; Burrascano, Pietro; Ricci, Marco
Pubblicato in: QIRT2018, Numero 2, 2018
Editore: ndt.net
DOI: 10.5281/zenodo.4282618

Detection of Unknown Defects in CFRP Using Eddy Current Pulsed Thermography and Microwave NDT

Autori: Qiuji Yi, Adi Mahmud Jaya Marindra, Junzhen Zhu, Abdoulaye Ba
Pubblicato in: 11th International Symposium NDT in Aerospace, 2019
Editore: ndt.net
DOI: 10.5281/zenodo.4419947

Comparison of different non-destructive testing techniques for bonding quality evaluation

Autori: Bengisu Yilmaz, Abdoulaye Ba, Elena Jasiuniene, Huu Kien Bui, Gerard Berthiau
Pubblicato in: 2019 IEEE 5th International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2019, Pagina/e 92-97, ISBN 978-1-7281-1344-9
Editore: IEEE
DOI: 10.1109/metroaerospace.2019.8869692

Improved shear horizontal wave piezoelectric fiber patch (SH-PFP) for structural health monitoringapplications

Autori: Yongtak KIM, Bernd KÖHLER
Pubblicato in: 10th International Symposium on NDT in Aerospace, 2018
Editore: ndt.net

Laser ultrasonic inspection for crack detection in a rotating tube under dynamic load

Autori: Peilong Yuan, Lisha Huo, Tommaso Seresini, Yang Liu, Sevilia Sunetchiieva, Helge Pfeiffer, Martine Wevers, Christ Glorieux
Pubblicato in: 2019 International Congress on Ultrasonics, 2020, Pagina/e 030013
Editore: ASA
DOI: 10.1121/2.0001128

Determination of the nonlinear elastic constants in a surface treated layer for aero-engine disk residual stress measurement

Autori: Gartsev, Sergey; Rjelka, Marek; Köhler, Bernd; Mayer, Andreas
Pubblicato in: 10th International Symposium on NDT in Aerospace, Oct 2018, Dresden, Germany (AeroNDT 2018), Numero 1, 2018
Editore: NDT.net
DOI: 10.5281/zenodo.4058824

Towards in-situ determination of Rayleigh wave acoustoelastic constants for surface treated materials characterization

Autori: Gartsev, Sergey; Rjelka, Marek; Köhler, Bernd
Pubblicato in: Review of Progress in Quantitative Nondestructive Evaluation, Numero 1, 2019, ISSN 0000-0000
Editore: Iowa State University Digital Press
DOI: 10.5281/zenodo.4058708

Evaluation of bonding quality by using ultrasonic waves

Autori: Yilmaz, Bengisu; Jasiūnienė, Elena; Mažeika, Liudas
Pubblicato in: ISBN 9789163962172, Numero 2, 2018
Editore: ndt.net
DOI: 10.5281/zenodo.3669897

Monitoring of structures and systems of aircraft by highly non-linear sensing devices

Autori: Pfeiffer, Helge; Wevers, Martine
Pubblicato in: 10th International Symposium on NDT in Aerospace, Oct 2018, Dresden, Germany (AeroNDT 2018), Numero 1, 2018
Editore: ndt.net
DOI: 10.5281/zenodo.4058473

Air-coupled ultrasonic Inspection of composite materials for aerospace applications

Autori: Muhammad Khalid Rizwan, Stefano Laureti, Pietro Burrascano, Roberto Petrucci, Luigi Torre, David Hutchins, Marco Ricci
Pubblicato in: 178th Meeting of the Acoustical Society of America, 2020, Pagina/e 055015
Editore: ASA
DOI: 10.1121/2.0001149

Towards an improved piezoelectric fiber patch for SH0 guided wave generation

Autori: Kim, Yongtak; Köhler, Bernd
Pubblicato in: Review of Progress in Quantitative Nondestructive Evaluation, Numero 2, 2019, ISSN 0000-0000
Editore: Iowa State University Digital Press
DOI: 10.5281/zenodo.4058787

Investigation of delamination in carbon ﬁber reinforced plastic by means of pulse thermography, shearography and active thermography

Autori: Tommaso Seresini, Peilong Yuan, Jürgen Grüber, Günther Mayr, Peter Burgholzer, Luca Pecoriello, Helge Pfeiffer, Martine Wevers, Christ Glorieux
Pubblicato in: 2019 International Congress on Ultrasonics, 2020, Pagina/e 030017
Editore: ASA
DOI: 10.1121/2.0001184

An Experimental Comparison of LED and Eddy Current Pulse-Compression Thermography on an Impact Damage CFRP Benchmark Sample

Autori: Hamed Malekmohammadi, Stefano Laureti, Marco Ricci, Qiuji Yi, Junzhen Zhu, Gui Yun Tian
Pubblicato in: 2018 IEEE Far East NDT New Technology & Application Forum (FENDT), 2018, Pagina/e 13-17, ISBN 978-1-5386-6230-4
Editore: IEEE
DOI: 10.1109/fendt.2018.8681968

Semi-analytical computation of a quasi-static field induced by a 3D eddy current probe in anisotropic material with parallel rough interfaces

Autori: Houssem Chebbi, Denis Premel
Pubblicato in: 11th International Symposium NDT in Aerospace, 2019
Editore: ndt.net

Damage detection by using features of nonlinear ultrasonic modulation in vibrating structures

Autori: S. Sunetchiieva, H. Pfeiffer, S. Creten, M. Wevers, C. Glorieux
Pubblicato in: ECNDT2018, 2018
Editore: ndt.net

Highly non-linear sensing devices in structural health monitoring

Autori: H. Pfeiffer, H. Sekler, S. Sunetchiieva, M. Wevers
Pubblicato in: ECNDT2018, 2018
Editore: ndt.net

Crack detection on aerospace composites by means of photorefractive interferometry.

Autori: T. Seresini, S. Sunetchiieva, H. Pfeiffer, M. Wevers, J. Xiong, C. Glorieux
Pubblicato in: ECNDT2018, 2018
Editore: ndt.net

Development of a technique for the detection and quantification of water and ice in the fuel tanks of an aircraft.

Autori: M. Stamm, H. Pfeiffer, J. Reynaert, M. Wevers, A. Vanaerschot
Pubblicato in: ECNDT2018, 2018
Editore: ndt.net

Fast 3D simulation of various applications of induction heating

Autori: H. K. Biu, A. Ba, G. Berthiau.
Pubblicato in: IOP Conference Series: Materials Science and Engineering., 2018
Editore: IOP Publishing

Comparison of optimization strategies for the improvement of depth detection capability of Pulse Compression Thermography

Autori: H. Malekmohammadi, S. Laureti, L. Senni, P. Burrascano, M. Ricci
Pubblicato in: 14th Quantitative InfraRed Thermography Conference, QIRT2018, 2018
Editore: QIRT Council

Auto Regressive Exogenous Modeling of Pseudonoise Thermography for the Nondestructive Evaluation of Aerospace Materials

Autori: S. Laureti, P. Burrascano, H. Malekhommadi, M. Ricci, S. Sfarra
Pubblicato in: 2018 5th IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace), 2018, Pagina/e 62-67, ISBN 978-1-5386-2474-6
Editore: IEEE
DOI: 10.1109/MetroAeroSpace.2018.8453581

Optimizing Ultrasonic Forgings Inspection by combining PulseCompression technique and multi-frequency AVG analysis

Autori: M. K. Rizwan, L. Senni, S. Laureti, P. Burrascano, M. Ricci
Pubblicato in: ECNDT2018, 2018
Editore: NDT.net

Nonlinear elastic behaviour of aero-engine materials for microstructure and stress state characterization

Autori: S. Gartsev, M. Rjelka, M. Barth, B. Koehler
Pubblicato in: ECNDT2018, 2018
Editore: ndt.net

New measurement approach for determination of residual stress and cold work at surface treated aeroengine materials

Autori: B. Koehler, J. Kissing, S. Gartsev, M. Barth, M. Rjelka, J. Bamberg, R. Hessert
Pubblicato in: ECNDT2018, 2018
Editore: ndt.net

The NDE of pultruded GRP composites using air-coupled ultrasound and EMAT-based guided wave inspection

Autori: Vyas, Jaishree; Jasiūnienė, Elena; Kažys, Rymantas Jonas; Amato, Silvio; Dixon, Steven; Hutchins, David A.
Pubblicato in: QNDE 2019: 46th Annual review of progress in quantitative nondestructive evaluation, Portland, Oregon, USA, July 14-18, 2019, Ames, IA : Iowa State University Digital Press, 2019, 8607, p. 1-3, Numero 2, 2019, ISSN 0000-0000
Editore: Iowa State University Digital Press
DOI: 10.5281/zenodo.4071688

Development of multi-physics multi-scale modelling platform for CFRP composites using inductive thermography techniques

Autori: Ba, Abdoulaye; Yilmaz, Bengisu; Bui, Huu Kien; Jasiūnienė, Elena; Berthiau, Gerard
Pubblicato in: AeroNDT 2018: 10th international symposium on NDT in aerospace, 24-26 October 2018, Dresden, Germany, Bad Breisig : NDT.net, 2018, p. 1-8, Numero 1, 2018
Editore: NDT.net
DOI: 10.5281/zenodo.3670719

Investigation on complex shaped aerospace structure: Reliability and Cost balance

Autori: Damira Smagulova; Bengisu Yilmaz; Mastan Raja Papanaboina; Elena Jasiuniene
Pubblicato in: 11th International Symposium on NDT in Aerospace, Nov 2019, Paris-Saclay, France, Numero 6, 2020
Editore: ndt.net
DOI: 10.5281/zenodo.4084959

3D Finite Element Model using SIBC to Accelerate Electromagnetic Thermal Simulation of Induction Thermography Technique

Autori: Abdoulaye Ba, Huu-Kien Bui, Gerard Berthiau, Didier Trichet, Guillaume Wasselynck
Pubblicato in: 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF), 2019, Pagina/e 1-2, ISBN 978-1-7281-1560-3
Editore: IEEE
DOI: 10.1109/isef45929.2019.9097101

Semi-analytical modeling of eddy current inspection of stratified and homogenized composite materials

Autori: Houssem CHEBBI, Denis PRÉMEL
Pubblicato in: 10th INTERNATIONAL SYMPOSIUM ON NDT IN AEROSPACE, 2018
Editore: ndt.net

Investigation of layer interface model of multi-layer structure using semi-analytical and FEM analysis for eddy current pulsed thermography

Autori: Qiuji Yi, GuiYun Tian, Houssem Chebbi, Denis Premel
Pubblicato in: 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2020, Pagina/e 1-5, ISBN 978-1-7281-4460-3
Editore: IEEE
DOI: 10.1109/I2MTC43012.2020.9128878

Risultati finali

Pubblicazioni

Condividi questa pagina Condividi questa pagina sui social network

Scarica Scarica il contenuto della pagina