Skip to main content

Hybrid INDustrial CONstruction through a 3D printing “all-in-one” machine for large-scale advanced manufacturing and building processes

Deliverables

Report of specific use cases development

Document with main outputs obtained by the all-in-one machine: manufacturing process monitoring, and; analysis of the construction elements properties.

Annual General Assembly Meeting (GAM) report 2

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month24

Dissemination Periodic Report 3

DPR 3. Public reports with technical progress about HINDCON project at M36.

Annual General Assembly Meeting (GAM) report 1

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month12

Regular Activity Report 2

RAR 2. Periodic reports with technical information and progress about HINDCON’s Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year2-Deliverable: Technical progress related to tasks scheduled from M13 to M24.

Annual General Assembly Meeting (GAM) report 3

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month36

Regular Activity Report 1

RAR 1. Periodic reports with technical information and progress about HINDCON's Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year1-Deliverable: Technical progress related to tasks scheduled from M1 to M12.

Dissemination Periodic Report 2

DPR 2. Definition of the Dissemination and Communication plan in order to assure the proper dissemination of the HINDCON results at M24.

Dissemination Periodic Report 1

DPR 1.Public reports with technical progress about HINDCON project at M12.

“All-in-one” machine video report Year1

Dissemination video concerning Year1 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year3

Dissemination video concerning Year3 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year2

Dissemination video concerning Year2 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

Project website

HINDCON project website. It includes general information, new, media, events related HINDCON and effective links with social media channels

Publications

Digitalization of project-based industries

Author(s): Olsson, Nils
Published in: ScAIEM Conference, 2017

3D-printed houses and cars on the horizon as manufacturing goes large




Digitally supported innovation in project based industries

Author(s): Økland, Andreas; Olsson, Nils.
Published in: 9th Nordic Conference on Construction Economics and Organization, 2017

Black-Box Accuracy Compensation for a Cable-driven Parallel Robot

Author(s): Valentin Schmidt, Werner Kraus, Christoph Martin, Xuejun Jin, Andreas Pott
Published in: 17th International Conference on Control, Automation and Systems (ICCAS 2017), 2017

3Dprinting buildings with concrete: new requiermenets for new needs

Author(s): Javier Alonso Madrid
Published in: International Conference on Construction Research. Instituto Eduardo Torroja CSIC. Madrid, 2018

Calculation of the Collision-free printing workspace for fully constrained cable-driven parallel robots

Author(s): Marc Fabritius, Christoph Martin and Andreas Pott
Published in: ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018

Building Information Modelling (BIM) for the Additive Manufacturing (AM): Challenges and opportunities for the construction




Industrialising concrete additive manufacturing

Author(s): Eli Sandberg, Morten Hatling, Trond Halvorsen
Published in: SIM AM, 2019

3D printed concrete in construction. Results from a literature study and survey

Author(s): Nils Olsson , Ali Shafqat , Emrah Arica , Andreas Økland
Published in: 10th Nordic Conference on Construction Economics and Organization, 2019
DOI: 10.1108/s2516-285320190000002044

An Experimental Investigation of the Quality of Parts Produced by Concrete Additive Manufacturing

Author(s): Panagis Foteinopoulos, Vivien Esnault, George Komineas, Alexios Papacharalampopoulos and Panagiotis Stavropoulos
Published in: International Journal of Advanced Manufacturing Technology, 2019, ISSN 0000-0000

Évaluation de l'impact des joints froids sur les propriétés mécaniques de mortiers imprimables accélérés

Author(s): V Esnault, M Behloul, A Mallet
Published in: ENPC-archives ouvertes, 2019

Building on a 3D solution for resource-efficient construction




Learn how EU’s €4.8M HINDCON project will industrialize AM for construction

Author(s): David Sher
Published in: 3D Printing Media Network, 2017

Concentrating concrete – hybrid manufacturing for large-scale construction

Author(s): Sam Davies
Published in: The Magazine for design to manufacturing innovation, 2018

Determination of the Cable Span and Cable Deflection of Cable-Driven Parallel Robots

Author(s): Andreas Pott
Published in: Cable-Driven Parallel Robots, Issue 53, 2018, Page(s) 106-116
DOI: 10.1007/978-3-319-61431-1_10

Efficient Computation of the Workspace Boundary, Its Properties and Derivatives for Cable-Driven Parallel Robots

Author(s): Andreas Pott
Published in: Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics that was held at Futuroscope-Poitiers, France, in May 2017, Issue 50, 2018, Page(s) 190-197
DOI: 10.1007/978-3-319-60867-9_22

Bending Cycles and Cable Properties of Polymer Fiber Cables for Fully Constrained Cable-Driven Parallel Robots

Author(s): Valentin Schmidt, Andreas Pott
Published in: Cable-Driven Parallel Robots, Issue 53, 2018, Page(s) 85-94
DOI: 10.1007/978-3-319-61431-1_8

A Unified Approach to Forward Kinematics for Cable-Driven Parallel Robots Based on Energy

Author(s): Andreas Pott, Philipp Tempel
Published in: Advances in Robot Kinematics 2018, Issue 8, 2019, Page(s) 401-409
DOI: 10.1007/978-3-319-93188-3_46

Experience in Online Modification of Rheology and Strength Acquisition of 3D Printable Mortars

Author(s): V. Esnault, A. Labyad, M. Chantin, F. Toussaint
Published in: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Issue 19, 2019, Page(s) 24-38
DOI: 10.1007/978-3-319-99519-9_3

Calculation of the cable-platform collision-free total orientation workspace of cable-driven parallel robots

Author(s): Marc Fabritius, Christoph Martin, Andreas Pott
Published in: Cable-Driven Parallel Robots - Proceedings of the 4th International Conference on Cable-Driven Parallel Robots, Issue 74, 2019, Page(s) 137-148
DOI: 10.1007/978-3-030-20751-9_12

On the potential of integrating Building Information Modelling (BIM) for the Additive Manufacturing (AM) of concrete structures

Author(s): Klodian Gradeci, Nathalie Labonnote
Published in: Construction Innovation: Information, Process, Management, 2019, ISSN 1471-4175

Block-based Analytical Hierarchy Process applied for the evaluation of Construction Sector Additive Manufacturing

Author(s): Panagis Foteinopoulos, Alexios Papacharalampopoulos, Panagiotis Stavropoulos
Published in: Procedia CIRP, Issue 81, 2019, Page(s) 950-955, ISSN 2212-8271
DOI: 10.1016/j.procir.2019.03.233