Resultado final
Document with main outputs obtained by the all-in-one machine: manufacturing process monitoring, and; analysis of the construction elements properties.
Annual General Assembly Meeting (GAM) report 2Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month24
Dissemination Periodic Report 3DPR 3. Public reports with technical progress about HINDCON project at M36.
Annual General Assembly Meeting (GAM) report 1Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month12
Regular Activity Report 2RAR 2. Periodic reports with technical information and progress about HINDCON’s Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year2-Deliverable: Technical progress related to tasks scheduled from M13 to M24.
Annual General Assembly Meeting (GAM) report 3Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month36
Regular Activity Report 1RAR 1. Periodic reports with technical information and progress about HINDCON's Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year1-Deliverable: Technical progress related to tasks scheduled from M1 to M12.
Dissemination Periodic Report 2DPR 2. Definition of the Dissemination and Communication plan in order to assure the proper dissemination of the HINDCON results at M24.
Dissemination Periodic Report 1DPR 1.Public reports with technical progress about HINDCON project at M12.
Dissemination video concerning Year1 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.
“All-in-one” machine video report Year3Dissemination video concerning Year3 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.
“All-in-one” machine video report Year2Dissemination video concerning Year2 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.
Project websiteHINDCON project website. It includes general information, new, media, events related HINDCON and effective links with social media channels
Publicaciones
Autores:
Olsson, Nils
Publicado en:
ScAIEM Conference, 2017
Editor:
The Scandinavian Academy of Industrial Engineering and Management
Autores:
Joanna Roberts
Publicado en:
HORIZON: The EU Research & Innovation Magazine, 2017
Editor:
EC
Autores:
Økland, Andreas; Olsson, Nils.
Publicado en:
9th Nordic Conference on Construction Economics and Organization, 2017
Editor:
Polyteknisk Forlag, DENMARK
Autores:
Valentin Schmidt, Werner Kraus, Christoph Martin, Xuejun Jin, Andreas Pott
Publicado en:
17th International Conference on Control, Automation and Systems (ICCAS 2017), 2017
Editor:
ICCAS
Autores:
Javier Alonso Madrid
Publicado en:
International Conference on Construction Research. Instituto Eduardo Torroja CSIC. Madrid, 2018
Editor:
Fundación Eduardo Torroja CSIC Spain
Autores:
Marc Fabritius, Christoph Martin and Andreas Pott
Publicado en:
ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018
Editor:
The American Society of Mechanical Engineers
Autores:
Klodian Gradeci, Nathalie Labonnote
Publicado en:
Collaborative Conference on Advanced Materials & 3D Printing, Malta, 2019
Editor:
OAHOST
Autores:
Eli Sandberg, Morten Hatling, Trond Halvorsen
Publicado en:
SIM AM, 2019
Editor:
Eccomas, IACM
Autores:
Nils Olsson , Ali Shafqat , Emrah Arica , Andreas Økland
Publicado en:
10th Nordic Conference on Construction Economics and Organization, 2019
Editor:
Emerald Reach Proceedings Series
DOI:
10.1108/s2516-285320190000002044
Autores:
Panagis Foteinopoulos, Vivien Esnault, George Komineas, Alexios Papacharalampopoulos and Panagiotis Stavropoulos
Publicado en:
International Journal of Advanced Manufacturing Technology, 2019, ISSN 0000-0000
Editor:
Not available
Autores:
V Esnault, M Behloul, A Mallet
Publicado en:
ENPC-archives ouvertes, 2019
Editor:
hal-enpc.archives-ouvertes.fr
Autores:
VIAS staff
Publicado en:
European Commission Research& Innovation Information Center, 2017
Editor:
EC
Autores:
David Sher
Publicado en:
3D Printing Media Network, 2017
Editor:
www.3dprintingmedia.network
Autores:
Sam Davies
Publicado en:
The Magazine for design to manufacturing innovation, 2018
Editor:
TCT
Autores:
Andreas Pott
Publicado en:
Cable-Driven Parallel Robots, Edición 53, 2018, Página(s) 106-116, ISBN 978-3-319-61430-4
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-61431-1_10
Autores:
Andreas Pott
Publicado en:
Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics that was held at Futuroscope-Poitiers, France, in May 2017, Edición 50, 2018, Página(s) 190-197, ISBN 978-3-319-60866-2
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-60867-9_22
Autores:
Valentin Schmidt, Andreas Pott
Publicado en:
Cable-Driven Parallel Robots, Edición 53, 2018, Página(s) 85-94, ISBN 978-3-319-61430-4
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-61431-1_8
Autores:
Andreas Pott, Philipp Tempel
Publicado en:
Advances in Robot Kinematics 2018, Edición 8, 2019, Página(s) 401-409, ISBN 978-3-319-93187-6
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-93188-3_46
Autores:
V. Esnault, A. Labyad, M. Chantin, F. Toussaint
Publicado en:
First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Edición 19, 2019, Página(s) 24-38, ISBN 978-3-319-99518-2
Editor:
Springer International Publishing
DOI:
10.1007/978-3-319-99519-9_3
Autores:
Marc Fabritius, Christoph Martin, Andreas Pott
Publicado en:
Cable-Driven Parallel Robots - Proceedings of the 4th International Conference on Cable-Driven Parallel Robots, Edición 74, 2019, Página(s) 137-148, ISBN 978-3-030-20750-2
Editor:
Springer International Publishing
DOI:
10.1007/978-3-030-20751-9_12
Autores:
Klodian Gradeci, Nathalie Labonnote
Publicado en:
Construction Innovation: Information, Process, Management, 2019, ISSN 1471-4175
Editor:
Arnold
Autores:
Panagis Foteinopoulos, Alexios Papacharalampopoulos, Panagiotis Stavropoulos
Publicado en:
Procedia CIRP, Edición 81, 2019, Página(s) 950-955, ISSN 2212-8271
Editor:
Elsevier
DOI:
10.1016/j.procir.2019.03.233
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles