Hybrid INDustrial CONstruction through a 3D printing “all-in-one” machine for large-scale advanced manufacturing and building processes

Projektinformationen

HINDCON

ID Finanzhilfevereinbarung: 723611

DOI 10.3030/723611

Projekt abgeschlossen

EK-Unterschriftsdatum 30 Juni 2016

Startdatum 15 September 2016

Enddatum 14 September 2019

Finanziert unter

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Gesamtkosten € 4 798 205,00

EU-Beitrag € 4 798 205,00

Koordiniert durch

VIAS Y CONSTRUCCIONES SA
Spain

Leistungen

Documents, reports (9)

Report of specific use cases development

Document with main outputs obtained by the all-in-one machine: manufacturing process monitoring, and; analysis of the construction elements properties.

Annual General Assembly Meeting (GAM) report 2

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month24

Dissemination Periodic Report 3

DPR 3. Public reports with technical progress about HINDCON project at M36.

Annual General Assembly Meeting (GAM) report 1

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month12

Regular Activity Report 2

RAR 2. Periodic reports with technical information and progress about HINDCON’s Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year2-Deliverable: Technical progress related to tasks scheduled from M13 to M24.

Annual General Assembly Meeting (GAM) report 3

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month36

Regular Activity Report 1

RAR 1. Periodic reports with technical information and progress about HINDCON's Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year1-Deliverable: Technical progress related to tasks scheduled from M1 to M12.

Dissemination Periodic Report 2

DPR 2. Definition of the Dissemination and Communication plan in order to assure the proper dissemination of the HINDCON results at M24.

Dissemination Periodic Report 1

DPR 1.Public reports with technical progress about HINDCON project at M12.

Websites, patent fillings, videos etc. (4)

“All-in-one” machine video report Year1

Dissemination video concerning Year1 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year3

Dissemination video concerning Year3 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year2

Dissemination video concerning Year2 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

Project website

HINDCON project website. It includes general information, new, media, events related HINDCON and effective links with social media channels

Veröffentlichungen

Conference proceedings (11)

Digitalization of project-based industries

Autoren: Olsson, Nils
Veröffentlicht in: ScAIEM Conference, 2017
Herausgeber: The Scandinavian Academy of Industrial Engineering and Management

3D-printed houses and cars on the horizon as manufacturing goes large

Autoren: Joanna Roberts
Veröffentlicht in: HORIZON: The EU Research & Innovation Magazine, 2017
Herausgeber: EC

Digitally supported innovation in project based industries

Autoren: Økland, Andreas; Olsson, Nils.
Veröffentlicht in: 9th Nordic Conference on Construction Economics and Organization, 2017
Herausgeber: Polyteknisk Forlag, DENMARK

Black-Box Accuracy Compensation for a Cable-driven Parallel Robot

Autoren: Valentin Schmidt, Werner Kraus, Christoph Martin, Xuejun Jin, Andreas Pott
Veröffentlicht in: 17th International Conference on Control, Automation and Systems (ICCAS 2017), 2017
Herausgeber: ICCAS

3Dprinting buildings with concrete: new requiermenets for new needs

Autoren: Javier Alonso Madrid
Veröffentlicht in: International Conference on Construction Research. Instituto Eduardo Torroja CSIC. Madrid, 2018
Herausgeber: Fundación Eduardo Torroja CSIC Spain

Calculation of the Collision-free printing workspace for fully constrained cable-driven parallel robots

Autoren: Marc Fabritius, Christoph Martin and Andreas Pott
Veröffentlicht in: ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018
Herausgeber: The American Society of Mechanical Engineers

Building Information Modelling (BIM) for the Additive Manufacturing (AM): Challenges and opportunities for the construction

Autoren: Klodian Gradeci, Nathalie Labonnote
Veröffentlicht in: Collaborative Conference on Advanced Materials & 3D Printing, Malta, 2019
Herausgeber: OAHOST

Industrialising concrete additive manufacturing

Autoren: Eli Sandberg, Morten Hatling, Trond Halvorsen
Veröffentlicht in: SIM AM, 2019
Herausgeber: Eccomas, IACM

3D printed concrete in construction. Results from a literature study and survey

Autoren: Nils Olsson , Ali Shafqat , Emrah Arica , Andreas Økland
Veröffentlicht in: 10th Nordic Conference on Construction Economics and Organization, 2019
Herausgeber: Emerald Reach Proceedings Series
DOI: 10.1108/s2516-285320190000002044

An Experimental Investigation of the Quality of Parts Produced by Concrete Additive Manufacturing

Autoren: Panagis Foteinopoulos, Vivien Esnault, George Komineas, Alexios Papacharalampopoulos and Panagiotis Stavropoulos
Veröffentlicht in: International Journal of Advanced Manufacturing Technology, 2019, ISSN 0000-0000
Herausgeber: Not available

Évaluation de l'impact des joints froids sur les propriétés mécaniques de mortiers imprimables accélérés

Autoren: V Esnault, M Behloul, A Mallet
Veröffentlicht in: ENPC-archives ouvertes, 2019
Herausgeber: hal-enpc.archives-ouvertes.fr

Other (3)

Building on a 3D solution for resource-efficient construction

Autoren: VIAS staff
Veröffentlicht in: European Commission Research& Innovation Information Center, 2017
Herausgeber: EC

Learn how EU’s €4.8M HINDCON project will industrialize AM for construction

Autoren: David Sher
Veröffentlicht in: 3D Printing Media Network, 2017
Herausgeber: www.3dprintingmedia.network

Concentrating concrete – hybrid manufacturing for large-scale construction

Autoren: Sam Davies
Veröffentlicht in: The Magazine for design to manufacturing innovation, 2018
Herausgeber: TCT

Book chapters (6)

Determination of the Cable Span and Cable Deflection of Cable-Driven Parallel Robots

Autoren: Andreas Pott
Veröffentlicht in: Cable-Driven Parallel Robots, Ausgabe 53, 2018, Seite(n) 106-116, ISBN 978-3-319-61430-4
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-319-61431-1_10

Efficient Computation of the Workspace Boundary, Its Properties and Derivatives for Cable-Driven Parallel Robots

Autoren: Andreas Pott
Veröffentlicht in: Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics that was held at Futuroscope-Poitiers, France, in May 2017, Ausgabe 50, 2018, Seite(n) 190-197, ISBN 978-3-319-60866-2
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-319-60867-9_22

Bending Cycles and Cable Properties of Polymer Fiber Cables for Fully Constrained Cable-Driven Parallel Robots

Autoren: Valentin Schmidt, Andreas Pott
Veröffentlicht in: Cable-Driven Parallel Robots, Ausgabe 53, 2018, Seite(n) 85-94, ISBN 978-3-319-61430-4
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-319-61431-1_8

A Unified Approach to Forward Kinematics for Cable-Driven Parallel Robots Based on Energy

Autoren: Andreas Pott, Philipp Tempel
Veröffentlicht in: Advances in Robot Kinematics 2018, Ausgabe 8, 2019, Seite(n) 401-409, ISBN 978-3-319-93187-6
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-319-93188-3_46

Experience in Online Modification of Rheology and Strength Acquisition of 3D Printable Mortars

Autoren: V. Esnault, A. Labyad, M. Chantin, F. Toussaint
Veröffentlicht in: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Ausgabe 19, 2019, Seite(n) 24-38, ISBN 978-3-319-99518-2
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-319-99519-9_3

Calculation of the cable-platform collision-free total orientation workspace of cable-driven parallel robots

Autoren: Marc Fabritius, Christoph Martin, Andreas Pott
Veröffentlicht in: Cable-Driven Parallel Robots - Proceedings of the 4th International Conference on Cable-Driven Parallel Robots, Ausgabe 74, 2019, Seite(n) 137-148, ISBN 978-3-030-20750-2
Herausgeber: Springer International Publishing
DOI: 10.1007/978-3-030-20751-9_12

Peer reviewed articles (2)

On the potential of integrating Building Information Modelling (BIM) for the Additive Manufacturing (AM) of concrete structures

Autoren: Klodian Gradeci, Nathalie Labonnote
Veröffentlicht in: Construction Innovation: Information, Process, Management, 2019, ISSN 1471-4175
Herausgeber: Arnold

Block-based Analytical Hierarchy Process applied for the evaluation of Construction Sector Additive Manufacturing

Autoren: Panagis Foteinopoulos, Alexios Papacharalampopoulos, Panagiotis Stavropoulos
Veröffentlicht in: Procedia CIRP, Ausgabe 81, 2019, Seite(n) 950-955, ISSN 2212-8271
Herausgeber: Elsevier
DOI: 10.1016/j.procir.2019.03.233