Hybrid INDustrial CONstruction through a 3D printing “all-in-one” machine for large-scale advanced manufacturing and building processes

Rezultaty

Report of specific use cases development

Document with main outputs obtained by the all-in-one machine: manufacturing process monitoring, and; analysis of the construction elements properties.

Annual General Assembly Meeting (GAM) report 2

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month24

Dissemination Periodic Report 3

DPR 3. Public reports with technical progress about HINDCON project at M36.

Annual General Assembly Meeting (GAM) report 1

Regular Activity Report 2

RAR 2. Periodic reports with technical information and progress about HINDCON’s Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year2-Deliverable: Technical progress related to tasks scheduled from M13 to M24.

Annual General Assembly Meeting (GAM) report 3

Regular Activity Report 1

RAR 1. Periodic reports with technical information and progress about HINDCON's Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year1-Deliverable: Technical progress related to tasks scheduled from M1 to M12.

Dissemination Periodic Report 2

DPR 2. Definition of the Dissemination and Communication plan in order to assure the proper dissemination of the HINDCON results at M24.

Dissemination Periodic Report 1

DPR 1.Public reports with technical progress about HINDCON project at M12.

“All-in-one” machine video report Year1

Dissemination video concerning Year1 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year3

Dissemination video concerning Year3 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year2

Dissemination video concerning Year2 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

Project website

HINDCON project website. It includes general information, new, media, events related HINDCON and effective links with social media channels

Publikacje

Digitalization of project-based industries

Autorzy: Olsson, Nils
Opublikowane w: ScAIEM Conference, 2017
Wydawca: The Scandinavian Academy of Industrial Engineering and Management

3D-printed houses and cars on the horizon as manufacturing goes large

Autorzy: Joanna Roberts
Opublikowane w: HORIZON: The EU Research & Innovation Magazine, 2017
Wydawca: EC

Digitally supported innovation in project based industries

Autorzy: Økland, Andreas; Olsson, Nils.
Opublikowane w: 9th Nordic Conference on Construction Economics and Organization, 2017
Wydawca: Polyteknisk Forlag, DENMARK

Black-Box Accuracy Compensation for a Cable-driven Parallel Robot

Autorzy: Valentin Schmidt, Werner Kraus, Christoph Martin, Xuejun Jin, Andreas Pott
Opublikowane w: 17th International Conference on Control, Automation and Systems (ICCAS 2017), 2017
Wydawca: ICCAS

3Dprinting buildings with concrete: new requiermenets for new needs

Autorzy: Javier Alonso Madrid
Opublikowane w: International Conference on Construction Research. Instituto Eduardo Torroja CSIC. Madrid, 2018
Wydawca: Fundación Eduardo Torroja CSIC Spain

Calculation of the Collision-free printing workspace for fully constrained cable-driven parallel robots

Autorzy: Marc Fabritius, Christoph Martin and Andreas Pott
Opublikowane w: ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018
Wydawca: The American Society of Mechanical Engineers

Building Information Modelling (BIM) for the Additive Manufacturing (AM): Challenges and opportunities for the construction

Autorzy: Klodian Gradeci, Nathalie Labonnote
Opublikowane w: Collaborative Conference on Advanced Materials & 3D Printing, Malta, 2019
Wydawca: OAHOST

Industrialising concrete additive manufacturing

Autorzy: Eli Sandberg, Morten Hatling, Trond Halvorsen
Opublikowane w: SIM AM, 2019
Wydawca: Eccomas, IACM

3D printed concrete in construction. Results from a literature study and survey

Autorzy: Nils Olsson , Ali Shafqat , Emrah Arica , Andreas Økland
Opublikowane w: 10th Nordic Conference on Construction Economics and Organization, 2019
Wydawca: Emerald Reach Proceedings Series
DOI: 10.1108/s2516-285320190000002044

An Experimental Investigation of the Quality of Parts Produced by Concrete Additive Manufacturing

Autorzy: Panagis Foteinopoulos, Vivien Esnault, George Komineas, Alexios Papacharalampopoulos and Panagiotis Stavropoulos
Opublikowane w: International Journal of Advanced Manufacturing Technology, 2019, ISSN 0000-0000
Wydawca: Not available

Évaluation de l'impact des joints froids sur les propriétés mécaniques de mortiers imprimables accélérés

Autorzy: V Esnault, M Behloul, A Mallet
Opublikowane w: ENPC-archives ouvertes, 2019
Wydawca: hal-enpc.archives-ouvertes.fr

Building on a 3D solution for resource-efficient construction

Autorzy: VIAS staff
Opublikowane w: European Commission Research& Innovation Information Center, 2017
Wydawca: EC

Learn how EU’s €4.8M HINDCON project will industrialize AM for construction

Autorzy: David Sher
Opublikowane w: 3D Printing Media Network, 2017
Wydawca: www.3dprintingmedia.network

Concentrating concrete – hybrid manufacturing for large-scale construction

Autorzy: Sam Davies
Opublikowane w: The Magazine for design to manufacturing innovation, 2018
Wydawca: TCT

Determination of the Cable Span and Cable Deflection of Cable-Driven Parallel Robots

Autorzy: Andreas Pott
Opublikowane w: Cable-Driven Parallel Robots, Numer 53, 2018, Strona(/y) 106-116, ISBN 978-3-319-61430-4
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-61431-1_10

Efficient Computation of the Workspace Boundary, Its Properties and Derivatives for Cable-Driven Parallel Robots

Autorzy: Andreas Pott
Opublikowane w: Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics that was held at Futuroscope-Poitiers, France, in May 2017, Numer 50, 2018, Strona(/y) 190-197, ISBN 978-3-319-60866-2
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-60867-9_22

Bending Cycles and Cable Properties of Polymer Fiber Cables for Fully Constrained Cable-Driven Parallel Robots

Autorzy: Valentin Schmidt, Andreas Pott
Opublikowane w: Cable-Driven Parallel Robots, Numer 53, 2018, Strona(/y) 85-94, ISBN 978-3-319-61430-4
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-61431-1_8

A Unified Approach to Forward Kinematics for Cable-Driven Parallel Robots Based on Energy

Autorzy: Andreas Pott, Philipp Tempel
Opublikowane w: Advances in Robot Kinematics 2018, Numer 8, 2019, Strona(/y) 401-409, ISBN 978-3-319-93187-6
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-93188-3_46

Experience in Online Modification of Rheology and Strength Acquisition of 3D Printable Mortars

Autorzy: V. Esnault, A. Labyad, M. Chantin, F. Toussaint
Opublikowane w: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Numer 19, 2019, Strona(/y) 24-38, ISBN 978-3-319-99518-2
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-99519-9_3

Calculation of the cable-platform collision-free total orientation workspace of cable-driven parallel robots

Autorzy: Marc Fabritius, Christoph Martin, Andreas Pott
Opublikowane w: Cable-Driven Parallel Robots - Proceedings of the 4th International Conference on Cable-Driven Parallel Robots, Numer 74, 2019, Strona(/y) 137-148, ISBN 978-3-030-20750-2
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-030-20751-9_12

On the potential of integrating Building Information Modelling (BIM) for the Additive Manufacturing (AM) of concrete structures

Autorzy: Klodian Gradeci, Nathalie Labonnote
Opublikowane w: Construction Innovation: Information, Process, Management, 2019, ISSN 1471-4175
Wydawca: Arnold

Block-based Analytical Hierarchy Process applied for the evaluation of Construction Sector Additive Manufacturing

Autorzy: Panagis Foteinopoulos, Alexios Papacharalampopoulos, Panagiotis Stavropoulos
Opublikowane w: Procedia CIRP, Numer 81, 2019, Strona(/y) 950-955, ISSN 2212-8271
Wydawca: Elsevier
DOI: 10.1016/j.procir.2019.03.233

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz