Hybrid INDustrial CONstruction through a 3D printing “all-in-one” machine for large-scale advanced manufacturing and building processes

Livrables

Report of specific use cases development

Document with main outputs obtained by the all-in-one machine: manufacturing process monitoring, and; analysis of the construction elements properties.

Annual General Assembly Meeting (GAM) report 2

Minutes from GAM related to Project Management Board decisions, technical WPs progress, deliverables review, dissemination, H2020 project or PPPs synergies and if needed amendments to the DOA at Month24

Dissemination Periodic Report 3

DPR 3. Public reports with technical progress about HINDCON project at M36.

Annual General Assembly Meeting (GAM) report 1

Regular Activity Report 2

RAR 2. Periodic reports with technical information and progress about HINDCON’s Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year2-Deliverable: Technical progress related to tasks scheduled from M13 to M24.

Annual General Assembly Meeting (GAM) report 3

Regular Activity Report 1

RAR 1. Periodic reports with technical information and progress about HINDCON's Work Packages status.Work Packages status: WP2,3,4,5,6,7,8 & 9 will appropriate provide evidences, outputs and progress of the research tasks as Year1-Deliverable: Technical progress related to tasks scheduled from M1 to M12.

Dissemination Periodic Report 2

DPR 2. Definition of the Dissemination and Communication plan in order to assure the proper dissemination of the HINDCON results at M24.

Dissemination Periodic Report 1

DPR 1.Public reports with technical progress about HINDCON project at M12.

“All-in-one” machine video report Year1

Dissemination video concerning Year1 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year3

Dissemination video concerning Year3 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

“All-in-one” machine video report Year2

Dissemination video concerning Year2 related to demonstration progress of HINDCON’s “all-in-one” machine: additive tools, subtractive tools, cable robot, laboratory prototypes, operational tests and manufacturing tests, etc.

Project website

HINDCON project website. It includes general information, new, media, events related HINDCON and effective links with social media channels

Publications

Digitalization of project-based industries

Auteurs: Olsson, Nils
Publié dans: ScAIEM Conference, 2017
Éditeur: The Scandinavian Academy of Industrial Engineering and Management

3D-printed houses and cars on the horizon as manufacturing goes large

Auteurs: Joanna Roberts
Publié dans: HORIZON: The EU Research & Innovation Magazine, 2017
Éditeur: EC

Digitally supported innovation in project based industries

Auteurs: Økland, Andreas; Olsson, Nils.
Publié dans: 9th Nordic Conference on Construction Economics and Organization, 2017
Éditeur: Polyteknisk Forlag, DENMARK

Black-Box Accuracy Compensation for a Cable-driven Parallel Robot

Auteurs: Valentin Schmidt, Werner Kraus, Christoph Martin, Xuejun Jin, Andreas Pott
Publié dans: 17th International Conference on Control, Automation and Systems (ICCAS 2017), 2017
Éditeur: ICCAS

3Dprinting buildings with concrete: new requiermenets for new needs

Auteurs: Javier Alonso Madrid
Publié dans: International Conference on Construction Research. Instituto Eduardo Torroja CSIC. Madrid, 2018
Éditeur: Fundación Eduardo Torroja CSIC Spain

Calculation of the Collision-free printing workspace for fully constrained cable-driven parallel robots

Auteurs: Marc Fabritius, Christoph Martin and Andreas Pott
Publié dans: ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018
Éditeur: The American Society of Mechanical Engineers

Building Information Modelling (BIM) for the Additive Manufacturing (AM): Challenges and opportunities for the construction

Auteurs: Klodian Gradeci, Nathalie Labonnote
Publié dans: Collaborative Conference on Advanced Materials & 3D Printing, Malta, 2019
Éditeur: OAHOST

Industrialising concrete additive manufacturing

Auteurs: Eli Sandberg, Morten Hatling, Trond Halvorsen
Publié dans: SIM AM, 2019
Éditeur: Eccomas, IACM

3D printed concrete in construction. Results from a literature study and survey

Auteurs: Nils Olsson , Ali Shafqat , Emrah Arica , Andreas Økland
Publié dans: 10th Nordic Conference on Construction Economics and Organization, 2019
Éditeur: Emerald Reach Proceedings Series
DOI: 10.1108/s2516-285320190000002044

An Experimental Investigation of the Quality of Parts Produced by Concrete Additive Manufacturing

Auteurs: Panagis Foteinopoulos, Vivien Esnault, George Komineas, Alexios Papacharalampopoulos and Panagiotis Stavropoulos
Publié dans: International Journal of Advanced Manufacturing Technology, 2019, ISSN 0000-0000
Éditeur: Not available

Évaluation de l'impact des joints froids sur les propriétés mécaniques de mortiers imprimables accélérés

Auteurs: V Esnault, M Behloul, A Mallet
Publié dans: ENPC-archives ouvertes, 2019
Éditeur: hal-enpc.archives-ouvertes.fr

Building on a 3D solution for resource-efficient construction

Auteurs: VIAS staff
Publié dans: European Commission Research& Innovation Information Center, 2017
Éditeur: EC

Learn how EU’s €4.8M HINDCON project will industrialize AM for construction

Auteurs: David Sher
Publié dans: 3D Printing Media Network, 2017
Éditeur: www.3dprintingmedia.network

Concentrating concrete – hybrid manufacturing for large-scale construction

Auteurs: Sam Davies
Publié dans: The Magazine for design to manufacturing innovation, 2018
Éditeur: TCT

Determination of the Cable Span and Cable Deflection of Cable-Driven Parallel Robots

Auteurs: Andreas Pott
Publié dans: Cable-Driven Parallel Robots, Numéro 53, 2018, Page(s) 106-116, ISBN 978-3-319-61430-4
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-61431-1_10

Efficient Computation of the Workspace Boundary, Its Properties and Derivatives for Cable-Driven Parallel Robots

Auteurs: Andreas Pott
Publié dans: Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics that was held at Futuroscope-Poitiers, France, in May 2017, Numéro 50, 2018, Page(s) 190-197, ISBN 978-3-319-60866-2
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-60867-9_22

Bending Cycles and Cable Properties of Polymer Fiber Cables for Fully Constrained Cable-Driven Parallel Robots

Auteurs: Valentin Schmidt, Andreas Pott
Publié dans: Cable-Driven Parallel Robots, Numéro 53, 2018, Page(s) 85-94, ISBN 978-3-319-61430-4
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-61431-1_8

A Unified Approach to Forward Kinematics for Cable-Driven Parallel Robots Based on Energy

Auteurs: Andreas Pott, Philipp Tempel
Publié dans: Advances in Robot Kinematics 2018, Numéro 8, 2019, Page(s) 401-409, ISBN 978-3-319-93187-6
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-93188-3_46

Experience in Online Modification of Rheology and Strength Acquisition of 3D Printable Mortars

Auteurs: V. Esnault, A. Labyad, M. Chantin, F. Toussaint
Publié dans: First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, Numéro 19, 2019, Page(s) 24-38, ISBN 978-3-319-99518-2
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-319-99519-9_3

Calculation of the cable-platform collision-free total orientation workspace of cable-driven parallel robots

Auteurs: Marc Fabritius, Christoph Martin, Andreas Pott
Publié dans: Cable-Driven Parallel Robots - Proceedings of the 4th International Conference on Cable-Driven Parallel Robots, Numéro 74, 2019, Page(s) 137-148, ISBN 978-3-030-20750-2
Éditeur: Springer International Publishing
DOI: 10.1007/978-3-030-20751-9_12

On the potential of integrating Building Information Modelling (BIM) for the Additive Manufacturing (AM) of concrete structures

Auteurs: Klodian Gradeci, Nathalie Labonnote
Publié dans: Construction Innovation: Information, Process, Management, 2019, ISSN 1471-4175
Éditeur: Arnold

Block-based Analytical Hierarchy Process applied for the evaluation of Construction Sector Additive Manufacturing

Auteurs: Panagis Foteinopoulos, Alexios Papacharalampopoulos, Panagiotis Stavropoulos
Publié dans: Procedia CIRP, Numéro 81, 2019, Page(s) 950-955, ISSN 2212-8271
Éditeur: Elsevier
DOI: 10.1016/j.procir.2019.03.233

Recherche de données OpenAIRE...

Livrables

Publications

Partager cette page

Télécharger