Efficient Structures and Processes for Reliable Perovskite Solar Modules

Projektinformationen

ESPResSo

ID Finanzhilfevereinbarung: 764047

DOI

10.3030/764047

Projekt abgeschlossen

EK-Unterschriftsdatum 27 März 2018

Startdatum 1 April 2018

Enddatum 30 September 2021

Finanziert unter

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Gesamtkosten

€ 5 412 657,50

EU-Beitrag

€ 5 412 657,50

Koordiniert durch

INTERUNIVERSITAIR MICRO-ELECTRONICA CENTRUM
Belgium

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Websites, patent fillings, videos etc. (3)

Final press release and public project report

A press release and public project report will be produced at the end of the project to disseminate research results raising broader public and governmental awareness

Project identity set and website created

A Project Identity Set will be created including the creation of a logo, a brochure, a slide template. A public project website will be used to communicate up-to-date information relating to the project, updated on a regular basis and at least every 3 months.

Public day event organised

Public day event will be organised as part of the project workshop. Leading organisations and persons of market analysts, standardization committees, process developer and equipment manufacturers, architects and designers will be invited. Current ESPResSo results and prototypes will be presented and discussed with these experts

Other (2)

Model of perovskite growth from solution

Hybrid DFT calculations including spin-orbit coupling (SOC) will be used to describe how defects ensuing from the perovskite growth will impact the optoelectronic quality of the ensuing materials

Outdoor testing protocols of PSC modules described and validated, available to broader scientific community

Outdoor testing protocols of PSC modules described and validated available to broader scientific community

Demonstrators, pilots, prototypes (7)

Demonstration of PSC technology in a BIPV façade element

PSC technology in a BIPV faade element is available for demonstration at outdoor location and inuse performance data gathering can be started

2nd workshop organized

Workshop to let the scientific community know about advances within our project as side event of main conference to maximize the visibility of the project outcomes

1st workshop organized

Workshop to let the scientific community know about advances within our project, as side event of main conference to maximize the visibility of the project outcomes

PCE of 12% for hexagonal and leaf-shaped flexible perovskite photovoltaic module on substrate area of 10x10 cm²

PCE of 12 for hexagonal and leafshaped flexible perovskite photovoltaic module on substrate area of 10x10 cm

Large area (35x35cm²) PSC module fabricated with OSI process, with full loss analysis compared with conventionally interconnected modules

Large area 35x35cm PSC module fabricated with OSI process with full loss analysiscompared with conventionally interconnected modules

Large area (35x35cm²) PSC module fabricated with efficiency >17% on aperture area

Large area 35x35cm PSC module fabricated with efficiency 17 on aperture area

Optimization of the mechanical assembly of semi-transparent PSC module on top of cSi cell to ensure higher PCE is obtained for this assembly compared with cSi cell alone

Optimization of the mechanical assembly of semitransparent PSC module on top of cSi cell to ensure higher PCE is obtained for this assembly compared with cSi cell alone

Documents, reports (3)

Cell with PCE ≥24% (1cm²), with hysteresis ≤10%

Cell with PCE 24 1cm with hysteresis 10

Device operation modelled of highest potential device architecture to yield PCE ≥24% (1cm²), with hysteresis ≤10%

Device operation modelled of highest potential device architecture to yield PCE 24 1cm with hysteresis 10

Model of defects at HTL/ETL for new perovskites at novel contacts

Model of defects at HTLETL as developed in D15 updated for new perovskites at novelContacts

Veröffentlichungen

Peer reviewed articles (14)

Improving the Morphology Stability of Spiro-OMeTAD Films for Enhanced Thermal Stability of Perovskite Solar Cells

Autoren: Wenya Song1,2*, Lucija Rakocevic1,2, Raghavendran Thiruvallur Eachambadi3, Weiming Qiu2,4, João P. Bastos4, Robert Gehlhaar4, Yinghuan Kuang1, Afshin Hadipour1, Tom Aernouts1, Jef Poortmans
Veröffentlicht in: ACS Appl. Mater. Interfaces, 2019, ISSN 1944-8252
Herausgeber: ACS
DOI: 10.1021/acsami.1c11227

An integrated bulk and surface modification strategy for gas-quenched inverted perovskite solar cells with efficiencies exceeding 22%

Autoren: Xin Zhang, Weiming Qiu*, Wenya Song, Zafer Hawash, Yaxin Wang, Bapi Pradhan, Yiyue Zhang, Denys Naumenko, Heinz Amenitsch, Ellen Moons, Tamara Merckx, Aranzazu Aguirre, Yaser Abdulraheem, Tom Aernouts, Yiqiang Zhan*, Yinghuan Kuang*, Johan Hofkens, Jef Poortmans*
Veröffentlicht in: Solar RRL, 2022, ISSN 2367-198X
Herausgeber: Wiley
DOI: 10.1002/solr.202200053

Loss Analysis in Perovskite Photovoltaic Modules

Autoren: Lucija Rakocevic, Laura E. Mundt, Robert Gehlhaar, Tamara Merckx, Tom Aernouts, Martin C. Schubert, Stefan W. Glunz, Jef Poortmans
Veröffentlicht in: Solar RRL, 2019, Seite(n) 1900338, ISSN 2367-198X
Herausgeber: Wiley
DOI: 10.1002/solr.201900338

Environmental Profile of the Manufacturing Process of Perovskite Photovoltaics: Harmonization of Life Cycle Assessment Studies

Autoren: Simone Maranghi, Maria Laura Parisi, Riccardo Basosi, Adalgisa Sinicropi
Veröffentlicht in: Energies, Ausgabe 12/19, 2019, Seite(n) 3746, ISSN 1996-1073
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12193746

Energy Level Tuning at the MAPbI 3 Perovskite/Contact Interface Using Chemical Treatment

Autoren: Daniele Meggiolaro, Edoardo Mosconi, Andrew H. Proppe, Rafael Quintero-Bermudez, Shana O. Kelley, Edward H. Sargent, Filippo De Angelis
Veröffentlicht in: ACS Energy Letters, Ausgabe 4/9, 2019, Seite(n) 2181-2184, ISSN 2380-8195
Herausgeber: American Chemical Society
DOI: 10.1021/acsenergylett.9b01584

Understanding the Solution Chemistry of Lead Halide Perovskites Precursors

Autoren: Eros Radicchi, Edoardo Mosconi, Fausto Elisei, Francesca Nunzi, Filippo De Angelis
Veröffentlicht in: ACS Applied Energy Materials, Ausgabe 2/5, 2019, Seite(n) 3400-3409, ISSN 2574-0962
Herausgeber: American Chemical Society
DOI: 10.1021/acsaem.9b00206

Charge Localization, Stabilization, and Hopping in Lead Halide Perovskites: Competition between Polaron Stabilization and Cation Disorder

Autoren: Francesco Ambrosio, Daniele Meggiolaro, Edoardo Mosconi, Filippo De Angelis
Veröffentlicht in: ACS Energy Letters, Ausgabe 4/8, 2019, Seite(n) 2013-2020, ISSN 2380-8195
Herausgeber: American Chemical Society
DOI: 10.1021/acsenergylett.9b01353

Rationalizing the Molecular Design of Hole‐Selective Contacts to Improve Charge Extraction in Perovskite Solar Cells

Autoren: Qiong Wang, Edoardo Mosconi, Christian Wolff, Junming Li, Dieter Neher, Filippo De Angelis, Gian Paolo Suranna, Roberto Grisorio, Antonio Abate
Veröffentlicht in: Advanced Energy Materials, Ausgabe 9/28, 2019, Seite(n) 1900990, ISSN 1614-6832
Herausgeber: Wiley-VCH Verlag
DOI: 10.1002/aenm.201900990

Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts

Autoren: Shuang Yang, Shangshang Chen, Edoardo Mosconi, Yanjun Fang, Xun Xiao, Congcong Wang, Yu Zhou, Zhenhua Yu, Jingjing Zhao, Yongli Gao, Filippo De Angelis, Jinsong Huang
Veröffentlicht in: Science, Ausgabe 365/6452, 2019, Seite(n) 473-478, ISSN 0036-8075
Herausgeber: American Association for the Advancement of Science
DOI: 10.1126/science.aax3294

Charge Carriers Are Not Affected by the Relatively Slow-Rotating Methylammonium Cations in Lead Halide Perovskite Thin Films

Autoren: Valentina M. Caselli, Mathias Fischer, Daniele Meggiolaro, Edoardo Mosconi, Filippo De Angelis, Samuel D. Stranks, Andreas Baumann, Vladimir Dyakonov, Eline M. Hutter, Tom J. Savenije
Veröffentlicht in: The Journal of Physical Chemistry Letters, Ausgabe 10/17, 2019, Seite(n) 5128-5134, ISSN 1948-7185
Herausgeber: American Chemical Society
DOI: 10.1021/acs.jpclett.9b02160

Electrochemical Hole Injection Selectively Expels Iodide from Mixed Halide Perovskite Films

Autoren: Gergely F. Samu, Ádám Balog, Filippo De Angelis, Daniele Meggiolaro, Prashant V. Kamat, Csaba Janáky
Veröffentlicht in: Journal of the American Chemical Society, Ausgabe 141/27, 2019, Seite(n) 10812-10820, ISSN 0002-7863
Herausgeber: American Chemical Society
DOI: 10.1021/jacs.9b04568

The nature of the lead-iodine bond in PbI2: A case study for the modelling of lead halide perovskites

Autoren: Costanza Borghesi, Eros Radicchi, Leonardo Belpassi, Daniele Meggiolaro, Filippo De Angelis, Francesca Nunzi
Veröffentlicht in: Computational and Theoretical Chemistry, Ausgabe 1164, 2019, Seite(n) 112558, ISSN 2210-271X
Herausgeber: Elsevier BV
DOI: 10.1016/j.comptc.2019.112558

Formation of Surface Defects Dominates Ion Migration in Lead-Halide Perovskites

Autoren: Daniele Meggiolaro, Edoardo Mosconi, Filippo De Angelis
Veröffentlicht in: ACS Energy Letters, Ausgabe 4/3, 2019, Seite(n) 779-785, ISSN 2380-8195
Herausgeber: American Chemical Society
DOI: 10.1021/acsenergylett.9b00247

Ligand-Induced Surface Charge Density Modulation Generates Local Type-II Band Alignment in Reduced-Dimensional Perovskites

Autoren: Rafael Quintero-Bermudez, Andrew H. Proppe, Arup Mahata, Petar Todorović́, Shana O. Kelley, Filippo De Angelis, Edward H. Sargent
Veröffentlicht in: Journal of the American Chemical Society, Ausgabe 141/34, 2019, Seite(n) 13459-13467, ISSN 0002-7863
Herausgeber: American Chemical Society
DOI: 10.1021/jacs.9b04801