Rezultaty
A press release and public project report will be produced at the end of the project to disseminate research results raising broader public and governmental awareness
Project identity set and website createdA Project Identity Set will be created including the creation of a logo, a brochure, a slide template. A public project website will be used to communicate up-to-date information relating to the project, updated on a regular basis and at least every 3 months.
Public day event organisedPublic day event will be organised as part of the project workshop. Leading organisations and persons of market analysts, standardization committees, process developer and equipment manufacturers, architects and designers will be invited. Current ESPResSo results and prototypes will be presented and discussed with these experts
Hybrid DFT calculations including spin-orbit coupling (SOC) will be used to describe how defects ensuing from the perovskite growth will impact the optoelectronic quality of the ensuing materials
Outdoor testing protocols of PSC modules described and validated, available to broader scientific communityOutdoor testing protocols of PSC modules described and validated available to broader scientific community
PSC technology in a BIPV faade element is available for demonstration at outdoor location and inuse performance data gathering can be started
2nd workshop organizedWorkshop to let the scientific community know about advances within our project as side event of main conference to maximize the visibility of the project outcomes
1st workshop organizedWorkshop to let the scientific community know about advances within our project, as side event of main conference to maximize the visibility of the project outcomes
PCE of 12% for hexagonal and leaf-shaped flexible perovskite photovoltaic module on substrate area of 10x10 cm²PCE of 12 for hexagonal and leafshaped flexible perovskite photovoltaic module on substrate area of 10x10 cm
Large area (35x35cm²) PSC module fabricated with OSI process, with full loss analysis compared with conventionally interconnected modulesLarge area 35x35cm PSC module fabricated with OSI process with full loss analysiscompared with conventionally interconnected modules
Large area (35x35cm²) PSC module fabricated with efficiency >17% on aperture areaLarge area 35x35cm PSC module fabricated with efficiency 17 on aperture area
Optimization of the mechanical assembly of semi-transparent PSC module on top of cSi cell to ensure higher PCE is obtained for this assembly compared with cSi cell aloneOptimization of the mechanical assembly of semitransparent PSC module on top of cSi cell to ensure higher PCE is obtained for this assembly compared with cSi cell alone
Cell with PCE 24 1cm with hysteresis 10
Device operation modelled of highest potential device architecture to yield PCE ≥24% (1cm²), with hysteresis ≤10%Device operation modelled of highest potential device architecture to yield PCE 24 1cm with hysteresis 10
Model of defects at HTL/ETL for new perovskites at novel contactsModel of defects at HTLETL as developed in D15 updated for new perovskites at novelContacts
Publikacje
Autorzy:
Wenya Song1,2*, Lucija Rakocevic1,2, Raghavendran Thiruvallur Eachambadi3, Weiming Qiu2,4, João P. Bastos4, Robert Gehlhaar4, Yinghuan Kuang1, Afshin Hadipour1, Tom Aernouts1, Jef Poortmans
Opublikowane w:
ACS Appl. Mater. Interfaces, 2019, ISSN 1944-8252
Wydawca:
ACS
DOI:
10.1021/acsami.1c11227
Autorzy:
Xin Zhang, Weiming Qiu*, Wenya Song, Zafer Hawash, Yaxin Wang, Bapi Pradhan, Yiyue Zhang, Denys Naumenko, Heinz Amenitsch, Ellen Moons, Tamara Merckx, Aranzazu Aguirre, Yaser Abdulraheem, Tom Aernouts, Yiqiang Zhan*, Yinghuan Kuang*, Johan Hofkens, Jef Poortmans*
Opublikowane w:
Solar RRL, 2022, ISSN 2367-198X
Wydawca:
Wiley
DOI:
10.1002/solr.202200053
Autorzy:
Lucija Rakocevic, Laura E. Mundt, Robert Gehlhaar, Tamara Merckx, Tom Aernouts, Martin C. Schubert, Stefan W. Glunz, Jef Poortmans
Opublikowane w:
Solar RRL, 2019, Strona(/y) 1900338, ISSN 2367-198X
Wydawca:
Wiley
DOI:
10.1002/solr.201900338
Autorzy:
Simone Maranghi, Maria Laura Parisi, Riccardo Basosi, Adalgisa Sinicropi
Opublikowane w:
Energies, Numer 12/19, 2019, Strona(/y) 3746, ISSN 1996-1073
Wydawca:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en12193746
Autorzy:
Daniele Meggiolaro, Edoardo Mosconi, Andrew H. Proppe, Rafael Quintero-Bermudez, Shana O. Kelley, Edward H. Sargent, Filippo De Angelis
Opublikowane w:
ACS Energy Letters, Numer 4/9, 2019, Strona(/y) 2181-2184, ISSN 2380-8195
Wydawca:
American Chemical Society
DOI:
10.1021/acsenergylett.9b01584
Autorzy:
Eros Radicchi, Edoardo Mosconi, Fausto Elisei, Francesca Nunzi, Filippo De Angelis
Opublikowane w:
ACS Applied Energy Materials, Numer 2/5, 2019, Strona(/y) 3400-3409, ISSN 2574-0962
Wydawca:
American Chemical Society
DOI:
10.1021/acsaem.9b00206
Autorzy:
Francesco Ambrosio, Daniele Meggiolaro, Edoardo Mosconi, Filippo De Angelis
Opublikowane w:
ACS Energy Letters, Numer 4/8, 2019, Strona(/y) 2013-2020, ISSN 2380-8195
Wydawca:
American Chemical Society
DOI:
10.1021/acsenergylett.9b01353
Autorzy:
Qiong Wang, Edoardo Mosconi, Christian Wolff, Junming Li, Dieter Neher, Filippo De Angelis, Gian Paolo Suranna, Roberto Grisorio, Antonio Abate
Opublikowane w:
Advanced Energy Materials, Numer 9/28, 2019, Strona(/y) 1900990, ISSN 1614-6832
Wydawca:
Wiley-VCH Verlag
DOI:
10.1002/aenm.201900990
Autorzy:
Shuang Yang, Shangshang Chen, Edoardo Mosconi, Yanjun Fang, Xun Xiao, Congcong Wang, Yu Zhou, Zhenhua Yu, Jingjing Zhao, Yongli Gao, Filippo De Angelis, Jinsong Huang
Opublikowane w:
Science, Numer 365/6452, 2019, Strona(/y) 473-478, ISSN 0036-8075
Wydawca:
American Association for the Advancement of Science
DOI:
10.1126/science.aax3294
Autorzy:
Valentina M. Caselli, Mathias Fischer, Daniele Meggiolaro, Edoardo Mosconi, Filippo De Angelis, Samuel D. Stranks, Andreas Baumann, Vladimir Dyakonov, Eline M. Hutter, Tom J. Savenije
Opublikowane w:
The Journal of Physical Chemistry Letters, Numer 10/17, 2019, Strona(/y) 5128-5134, ISSN 1948-7185
Wydawca:
American Chemical Society
DOI:
10.1021/acs.jpclett.9b02160
Autorzy:
Gergely F. Samu, Ádám Balog, Filippo De Angelis, Daniele Meggiolaro, Prashant V. Kamat, Csaba Janáky
Opublikowane w:
Journal of the American Chemical Society, Numer 141/27, 2019, Strona(/y) 10812-10820, ISSN 0002-7863
Wydawca:
American Chemical Society
DOI:
10.1021/jacs.9b04568
Autorzy:
Costanza Borghesi, Eros Radicchi, Leonardo Belpassi, Daniele Meggiolaro, Filippo De Angelis, Francesca Nunzi
Opublikowane w:
Computational and Theoretical Chemistry, Numer 1164, 2019, Strona(/y) 112558, ISSN 2210-271X
Wydawca:
Elsevier BV
DOI:
10.1016/j.comptc.2019.112558
Autorzy:
Daniele Meggiolaro, Edoardo Mosconi, Filippo De Angelis
Opublikowane w:
ACS Energy Letters, Numer 4/3, 2019, Strona(/y) 779-785, ISSN 2380-8195
Wydawca:
American Chemical Society
DOI:
10.1021/acsenergylett.9b00247
Autorzy:
Rafael Quintero-Bermudez, Andrew H. Proppe, Arup Mahata, Petar Todorović́, Shana O. Kelley, Filippo De Angelis, Edward H. Sargent
Opublikowane w:
Journal of the American Chemical Society, Numer 141/34, 2019, Strona(/y) 13459-13467, ISSN 0002-7863
Wydawca:
American Chemical Society
DOI:
10.1021/jacs.9b04801
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników