Leistungen
First design of the heat exchanger solution (Task 4.3) consists in the preliminary design of the heat exchanger by FIVES, according to WP1 specifications, and preliminary outcomes of Task 4.1 and 4.2.
Mechanical resistance evaluationThe report on Mechanical resistance evaluation (Task 4.1) will summarize the results of the validation of PFHE (plate and fins HX) configuration for high pressure and high temperature (operating conditions). According to the results, all partners will choose the best solution between PFHE and PCHE (printed circuit Heat Exchanger).
Project Management PlanThe Project Management Plan (Task 9.1) will consist of a Gantt chart and a Work Breakdown Structure (WBS), including a schedule per task, responsible partner related subtasks, related deliverables, and dependencies on other tasks. This Plan will be revised and updated at least twice during the project.
Methodology for corrosion testingThis deliverable (Task 2.4) will consist in the elaboration of a methodology for corrosion testing (including sample specification and definition of operational conditions for the corrosion tests), so as to be able to then test (Task 2.5) the most promising materials identified.
Report on benchmark parameters and loop geometryReport on benchmark parameters and loop geometry (Task 5.4) includes the validation on experimental data collected from the CVR sCO2 loop operation of the computational codes used for tasks 5.1 and 5.2 as well as the definiton of parameters for the benchmark and for the loop.
Report on selected cycle architectureThis report (Task 1.3) will identify the selected cycle architecture and serve as a basis for the entire project by defining the main assumptions on which the partners will build on to carry out their work, which will make possible to validate or not the choices made for the sCO2 cycle and/or to propose improvements and innovative solutions to meet the flexibility needs defined.
Flexibility constraints & Load scenariosThis intermediate report (Task 1.2) will detail the different flexibility constraints & load scenarios, explaining their impacts on the cycle operability (demand estimation to determine the stops/starts scenario, scenarios of partial load variations). Task 1.3's actions will be inter alia based on the conclusions of this Report.
sCO2 Brayton cycle architecture and components’ specificationsThis intermediate report (Task 1.1) will detail and explain the sCO2 Brayton cycle studied architectures (strengths and weaknesses, global performances, layout, specifications, operating conditions…) and components’ specification. In Task 1.3 the partners will select the final cycle architecture.
Report on the nominal design of different plant configurations and sensitivity analysis on main design parametersReport on the nominal design of different plant configurations and sensitivity analysis on main design parameters (Task 5.1) includes the outcomes of the validation of the nominal cycle design defined in WP1 and the outcomes of the sensitivity analysis of the most significant cycle parameters carried out to validate WP1 results and to highlight future scenarios.
Short report on initial dissemination material (Task 8.2) will detail the dissemination materials developed to ensure the proper dissemination of the project's objectives, results and outcomes, inter alia the logo, the factsheets, the public summaries, the leaflets, the press releases and articles, the posters and the videos.
Project website"The deliverable ""sCO2-Flex website"" (Task 8.2) includes the design, development and update of sCO2-Flex's website. This one will be regularly updated with public results, deliverables, news and events, thus ensuring an analytical record and assessment of the project dissemination and communication activities"
Updated Dissemination materialShort Report on updated dissemination material (Task 8.2) will be an updated version of the Initial Dissemination Material Deliverable, describing the dissemination materials developed to ensure the proper dissemination of the project's objectives, results and outcomes.
Publishable summaryPublishable summary of the sCO2-Flex project (Task 8.2) is a document prepared by the consortium (to be sent to the EC) and uploaded on the project website, presenting the advances of the project.
Social network profilesSocial network profiles (Task 8.2) will detail the profiles created on social networks such as Facebook, Twitter and LinkedIn, used as direct communication channels with companies, citizens, and professionals. Updates, events, news, etc. will be published on social networks so as to increase the visibility of sCO2-Flex and visits on the website.
First Exploitation planThe first version of the sCO2-Flex Exploitation plan (Task 8.1) will ensure the proper market uptake of the solution implemented through the development of business plans and exploitation action plans and the identification of technology transfer opportunities.
First Dissemination and communication planThe first Dissemination and communication plan (Task 8.2), updated every 6 months, will provide guidelines enabling the consortium to target the relevant audiences, to finetune key messages, to use the most efficient communication channels) and to define a clear planning for dissemination and communication activities.
"""Materials selection, definition of samples and parameters for corrosion tests"" (Task 3.3) consists in assessing samples' corrosion and erosion resistance properties and to modify the test section of CVR's loop to represent the turbine conditions so as to be able to perform tests in CVR's laboratory. "
Veröffentlichungen
Autoren:
Francesco Casella, Giovanni Mangola, Dario Alfani
Veröffentlicht in:
IFAC-PapersOnLine, Ausgabe 53/2, 2020, Seite(n) 12554-12559, ISSN 2405-8963
Herausgeber:
POLIMI
DOI:
10.1016/j.ifacol.2020.12.1810
Autoren:
Dario Alfani, Marco Binotti, Ennio Macchi, Paolo Silva, Marco Astolfi
Veröffentlicht in:
Applied Thermal Engineering, Ausgabe 195, 2021, Seite(n) 117013, ISSN 1359-4311
Herausgeber:
Pergamon Press Ltd.
DOI:
10.1016/j.applthermaleng.2021.117013
Autoren:
Andreas Wahl, Rainer Mertz, Eckart Laurien, Jörg Starflinger
Veröffentlicht in:
The Journal of Supercritical Fluids, Ausgabe 173, 2021, Seite(n) 105221, ISSN 0896-8446
Herausgeber:
Elsevier BV
DOI:
10.1016/j.supflu.2021.105221
Autoren:
Dario Alfani, Marco Astolfi, Marco Binotti, Paolo Silva
Veröffentlicht in:
Journal of Engineering for Gas Turbines and Power, Ausgabe 143/9, 2021, ISSN 0742-4795
Herausgeber:
American Society of Mechanical Engineers
DOI:
10.1115/1.4051003
Autoren:
Abd El Hussein, I.; Schuster, S.; Brillert, D.
Veröffentlicht in:
The 4th European sCO2 Conference for Energy Systems, 2021
Herausgeber:
UDE
DOI:
10.17185/duepublico/73954
Autoren:
Maquart, Victor; Valentin, Benoît; Cagnac, Albannie
Veröffentlicht in:
4th European sCO2 Conference for Energy Systems, 2021
Herausgeber:
UDE
DOI:
10.17185/duepublico/73963
Autoren:
Dario Alfani, Marco Astolfi, Marco Binotti, Paolo Silva, Ennio Macchi
Veröffentlicht in:
SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems, 2020, Seite(n) 130001
Herausgeber:
AIP Publishing
DOI:
10.1063/5.0029801
Autoren:
Dario Alfani
Marco Astolfi
Marco Binotti
Matteo C Romano
Ennio Macchi
Stefano Filippini
Umberto Merlo
Veröffentlicht in:
5th International Seminar on ORC Power Systems, 2019
Herausgeber:
KCORC
Autoren:
Lucia Rozumová, Jan Berka, Ladislav Velebil, Tomáš Melichar
Veröffentlicht in:
NENE 2020 Conference, 2020
Herausgeber:
Nuclear Society of Slovenia
Autoren:
Dario Alfani, Marco Astolfi, Marco Binotti, Paolo Silva
Veröffentlicht in:
Volume 11: Structures and Dynamics: Structural Mechanics, Vibration, and Damping; Supercritical CO2, 2020, ISBN 978-0-7918-8423-2
Herausgeber:
American Society of Mechanical Engineers
DOI:
10.1115/gt2020-15541
Autoren:
Dario Alfani, Marco Astolfi, Marco Binotti, Stefano Campanari, Francesco Casella, Paolo Silva
Veröffentlicht in:
Volume 3: Coal, Biomass, Hydrogen, and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration; Organic Rankine Cycle Power Systems, 2019, ISBN 978-0-7918-5860-8
Herausgeber:
American Society of Mechanical Engineers
DOI:
10.1115/gt2019-91789
Autoren:
Cagnac, Albannie; Mecheri, Mounir; Bedogni, Stefano
Veröffentlicht in:
3rd European Conference on Supercritical CO2 (sCO2) Power Systems 2019 : 19th-20th September 2019, 2019
Herausgeber:
/
DOI:
10.17185/duepublico/48907
Autoren:
Tioual-Demange, Sarah / Bergin, Gaëtan / Mazet, Thierry
Veröffentlicht in:
3rd European Conference on Supercritical CO2 (sCO2) Power Systems 2019 : 19th-20th September 2019, 2019
Herausgeber:
/
DOI:
10.17185/duepublico/48900
Autoren:
Dario, Alfani;
Astolfi, Marco;
Binotti, Marco ;
Macchi, Ennio;
Silva, Paolo
Veröffentlicht in:
3rd European Conference on Supercritical CO2 (sCO2) Power Systems 2019 : 19th-20th September 2019, 2019
Herausgeber:
/
DOI:
10.17185/duepublico/48897
Autoren:
Mounir MECHERI
Huiqi WANG
Veröffentlicht in:
6th International Supercritical CO2 Power Cycles Symposium, 2018
Herausgeber:
/
Autoren:
Lucia Rozumová, Tomáš Melichar, Ladislav Velebil
Veröffentlicht in:
4th European sCO2 Conference for Energy Systems, 2021
Herausgeber:
UDE
DOI:
10.17185/duepublico/73951
Autoren:
Dario Alfani
Marco Astolfi
Marco Binotti
Ennio Macchi
Paolo Silva
Veröffentlicht in:
5th International Seminar on ORC Power Systems, 2019
Herausgeber:
KCORC
Autoren:
Alexander Johannes Hacks, Sebastian Schuster, Dieter Brillert
Veröffentlicht in:
Proceedings of Global Power & Propulsion Society, 2020
Herausgeber:
GPPS
DOI:
10.33737/gpps20-tc-177
Autoren:
Abd El Hussein, I.; Schuster, S.; Brillert, D.
Veröffentlicht in:
14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 2021
Herausgeber:
European turbine conference
Autoren:
Ihab Abd El Hussein, Alexander Johannes Hacks, Sebastian Schuster, Dieter Brillert
Veröffentlicht in:
Volume 11: Structures and Dynamics: Structural Mechanics, Vibration, and Damping; Supercritical CO2, 2020, ISBN 978-0-7918-8423-2
Herausgeber:
American Society of Mechanical Engineers
DOI:
10.1115/gt2020-15248
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor