Deliverables Demonstrators, pilots, prototypes (4) Cosmetic tubes - packaging demonstrator production Report of Task 64 Automotive in-cabin components demonstrator production First report about Task 63 Simulation data for input into WP 4 The efficiency of microstructure replication on thermoplastic parts via IM will be modelled. It will require inputs from the injection moulding process and the part metrology. The software to be developed53 will simulate the replication efficiency of the microstructures on the polymer part surface, taking into account the part geometry, the polymer material behavior and the IM process parameters.The resulting demonstrator is expected to serve as a production assistant-tool enabling one to control the process parameters and the resulting part quality, while facilitating the manufacturing of such functional parts. Orthodontics demonstrator production Report of Task 64 Documents, reports (9) Guidelines for implementation of the HIMALAIA technology at factory level IPC will lead CRF EO and Alba in producing guidelines for implementing the HIMALAIAs technology at factory level It is essential for the consortium to be able to provide companies especially SMEs with such guidelines after the project in order to ensure the sustainability of the HIMALAIA platforms and technology towards 2030 Public summary of the specifications of all three demonstrators This public summary of the results of Tasks 1.1, 1.2 and 1.3 will enable dissemination whilst not compromising partners' IP. Communication tools Communication tools will include the logo, poster, video, brochure and website. Minutes of the Meeting with complementary projects With the goal of networking concertation and exchange of best practices this report will document a meeting with representatives from complementary projects The report will address bestpractices and joint actions regarding scientific standardisation economic and regulatory issues related to projects results Report on Life Cycle Assessment Report of Task 61 Report on new paradigms and ICT tools for HIMALAIA’s technological integration with scenario for broad industrial implementation This report is linked to Task 56It will report methodologies as well as ICT tools which could enable the rapid integration of advanced IM technologies for the replication of parts with micron and submicron surface structures in current industries Those tools will be related to product design smart manufacturing planning resource management tools for efficient humanmachine interaction logistics etc Best Practices for IM-based Platform This report is linked to Task 56 IPC as task Leader will identify best practices to assist industrial integration of at the factory level UBradford and UoB will participate in the identification of methodology for product design based manufacturing of micron and submicron structures via IM replication CRF EO and Alba will provide feedback about industrial needs at the factory level GFMS and Alicona will provide the consortium with data relevant to the integration and interoperability of hardware and equipment into connected factories Report on technology transfer towards companies and EU daughter platforms for a 2030 strengthened European manufacturing industry This will serve as the final report of Task 84 Input to standards concerning functional surfaces This will be the output of Task 74 Open Research Data Pilot (1) Data Management Plan The DMP will describe the project’s policy concerning any shared data. It will serve to ensure that any shared data is findable, accessible, interoperable and re-usable (FAIR). It will cover the handling, curation and preservation of research data during and after the end of the project. It will summarise what data will be collected, what data will be shared and via what methodology and standards it will be shared. Websites, patent fillings, videos etc. (1) HIMALAIA workshop This will be the result of Task 76 Other (1) Multifunction tool and planar insert design A multifunctional tool design will be developed and manufactured to study the influence of process variants (rapid mould temperature cycling, inductive heating, injection compression, cavity evacuation, ultrasonic ejection) on the replication of patterns produced on simple inserts. The tool design will be a small scale, low cost concept that can accept a standard insert, allowing parallel studies on different moulding hardware at the UBradford and IPC facilities. Multiple variants of the insert will have a range of surface geometries and laser-prepared patterns which are representative of the end user devices. Publications Peer reviewed articles (24) Subwavelength Direct Laser Nanopatterning Via Microparticle Arrays for Functionalizing Metallic Surfaces Author(s): Jean-Michel Romano, Rajib Ahmed, Antonio Garcia-Giron, Pavel Penchev, Haider Butt, Olivier Delléa, Melissa Sikosana, Ralf Helbig, Carsten Werner, Stefan Dimov Published in: Journal of Micro and Nano-Manufacturing, Issue 7/1, 2019, ISSN 2166-0468 Publisher: ASME DOI: 10.1115/1.4042964 Inline LIPSS Monitoring Method Employing Light Diffraction Author(s): Aleksandra Michalek, Tahseen Jwad, Pavel Penchev, Tian Long See, Stefan Dimov Published in: Journal of Micro and Nano-Manufacturing, Issue 8/1, 2020, ISSN 2166-0468 Publisher: ASME DOI: 10.1115/1.4045681 Correlating nano-scale surface replication accuracy and cavity temperature in micro-injection moulding using in-line process control and high-speed thermal imaging Author(s): Federico Baruffi, Mert Gülçür, Matteo Calaon, Jean-Michel Romano, Pavel Penchev, Stefan Dimov, Ben Whiteside, Guido Tosello Published in: Journal of Manufacturing Processes, Issue 47, 2019, Page(s) 367-381, ISSN 1526-6125 Publisher: Elsevier BV DOI: 10.1016/j.jmapro.2019.08.017 Combined surface hardening and laser patterning approach for functionalising stainless steel surfaces Author(s): A. Garcia-Giron, J.M. Romano, Y. Liang, B. Dashtbozorg, H. Dong, P. Penchev, S.S. Dimov Published in: Applied Surface Science, Issue 439, 2018, Page(s) 516-524, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2018.01.012 Anti-Biofouling Properties of Femtosecond Laser-Induced Submicron Topographies on Elastomeric Surfaces Author(s): Reshma Y Siddiquie, Anvesh Gaddam, Amit Agrawal, Stefan S. Dimov, Suhas S. Joshi Published in: Langmuir, Issue 36/19, 2020, Page(s) 5349-5358, ISSN 0743-7463 Publisher: American Chemical Society DOI: 10.1021/acs.langmuir.0c00753 Durability and Wear Resistance of Laser-Textured Hardened Stainless Steel Surfaces with Hydrophobic Properties Author(s): A. Garcia-Giron, J. M. Romano, A. Batal, B. Dashtbozorg, H. Dong, E. Martinez Solanas, D. Urrutia Angos, M. Walker, P. Penchev, S. S. Dimov Published in: Langmuir, Issue 35/15, 2019, Page(s) 5353-5363, ISSN 0743-7463 Publisher: American Chemical Society DOI: 10.1021/acs.langmuir.9b00398 Mechanical durability of hydrophobic surfaces fabricated by injection moulding of laser-induced textures Author(s): Jean-Michel Romano, Mert Gulcur, Antonio Garcia-Giron, Elena Martinez-Solanas, Ben R. Whiteside, Stefan S. Dimov Published in: Applied Surface Science, Issue 476, 2019, Page(s) 850-860, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2019.01.162 A cost-effective process chain for thermoplastic microneedle manufacture combining laser micro-machining and micro-injection moulding Author(s): Mert Gülçür, Jean-Michel Romano, Pavel Penchev, Tim Gough, Elaine Brown, Stefan Dimov, Ben Whiteside Published in: CIRP Journal of Manufacturing Science and Technology, Issue 32, 2021, Page(s) 311-321, ISSN 1755-5817 Publisher: Elsevier BV DOI: 10.1016/j.cirpj.2021.01.015 Effects of mould wear on hydrophobic polymer surfaces replicated using plasma-treated and laser-textured stainless steel inserts Author(s): Jean-Michel Romano, Jorge Fantova Sarasa, Carlos Concheso, Mert Gulcur, Behnam Dashtbozorg, Antonio Garcia-Giron, Pavel Penchev, Hanshan Dong, Ben R. Whiteside, Stefan Dimov Published in: Tribology - Materials, Surfaces & Interfaces, Issue 14/4, 2020, Page(s) 240-252, ISSN 1751-5831 Publisher: Maney Publishing DOI: 10.1080/17515831.2020.1785234 Effects of laser processing conditions on wettability and proliferation of Saos-2 cells on CoCrMo alloy surfaces Author(s): Afif Batal, Aleksandra Michalek, Antonio Garcia-Giron, Vahid Nasrollahi, Pavel Penchev, Rachel Sammons, Stefan Dimov Published in: Advanced Optical Technologies, Issue 9/1-2, 2020, Page(s) 67-78, ISSN 2192-8584 Publisher: De Gruyter DOI: 10.1515/aot-2019-0051 Triangular laser-induced submicron textures for functionalising stainless steel surfaces Author(s): Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Stefan Dimov Published in: Applied Surface Science, Issue 440, 2018, Page(s) 162-169, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2018.01.086 Springtail-Inspired Triangular Laser-Induced Surface Textures on Metals Using MHz Ultrashort Pulses Author(s): Jean-Michel Romano, Ralf Helbig, Fotis Fraggelakis, Antonio Garcia-Giron, Carsten Werner, Rainer Kling, Stefan Dimov Published in: Journal of Micro and Nano-Manufacturing, Issue 7/2, 2019, ISSN 2166-0468 Publisher: ASME DOI: 10.1115/1.4043417 Femtosecond laser-induced sub-micron and multi-scale topographies for durable lubricant impregnated surfaces for food packaging applications Author(s): Themistoklis Karkantonis, Anvesh Gaddam, Tian Long See, Suhas S. Joshi, Stefan Dimov Published in: Surface and Coatings Technology, Issue 399, 2020, Page(s) 126166, ISSN 0257-8972 Publisher: Elsevier BV DOI: 10.1016/j.surfcoat.2020.126166 Laser processing of freeform surfaces: A new approach based on an efficient workpiece partitioning strategy Author(s): A. Batal, A. Michalek, P. Penchev, A. Kupisiewicz, S. Dimov Published in: International Journal of Machine Tools and Manufacture, Issue 156, 2020, Page(s) 103593, ISSN 0890-6955 Publisher: Elsevier BV DOI: 10.1016/j.ijmachtools.2020.103593 Reduced friction and wear of electro-brush plated nickel composite coatings reinforced by graphene oxide Author(s): Shaojun Qi, Xiaoying Li, Hanshan Dong Published in: Wear, Issue 426-427, 2019, Page(s) 228-238, ISSN 0043-1648 Publisher: Elsevier BV DOI: 10.1016/j.wear.2018.12.069 Anti-icing properties of femtosecond laser-induced nano and multiscale topographies Author(s): Anvesh Gaddam, Himani Sharma, Themistoklis Karkantonis, Stefan Dimov Published in: Applied Surface Science, Issue 552, 2021, Page(s) 149443, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2021.149443 A study on the effect of ultrashort pulsed laser texturing on the microstructure and properties of metastable S phase layer formed on AISI 316L surfaces Author(s): Behnam Dashtbozorg, Xiaoying Li, Jean–Michel Romano, Antonio Garcia–Giron, Rachel L. Sammons, Stefan Dimov, Hanshan Dong Published in: Applied Surface Science, Issue 511, 2020, Page(s) 145557, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2020.145557 Lotus-Leaf Inspired Surfaces: Hydrophobicity Evolution of Replicas Due to Mechanical Cleaning and Mold Wear Author(s): Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Mert Gulcur, Ben R. Whiteside, Stefan Dimov Published in: Journal of Micro and Nano-Manufacturing, Issue 8/1, 2020, ISSN 2166-0468 Publisher: Lawrence Kulinsky DOI: 10.1115/1.4046097 Modelling ultrafast laser structuring/texturing of freeform surfaces Author(s): Aleksandra Michalek, Afif Batal, Shaojun Qi, Pavel Penchev, David Bruneel, Tian Long See, Stefan Dimov Published in: Applied Surface Science Advances, Issue 2, 2020, Page(s) 100036, ISSN 2666-5239 Publisher: Elsevier B.V. DOI: 10.1016/j.apsadv.2020.100036 Response of Saos-2 osteoblast-like cells to laser surface texturing, sandblasting and hydroxyapatite coating on CoCrMo alloy surfaces Author(s): Afif Batal, Rachel Sammons, Stefan Dimov Published in: Materials Science and Engineering: C, Issue 98, 2019, Page(s) 1005-1013, ISSN 0928-4931 Publisher: Elsevier BV DOI: 10.1016/j.msec.2019.01.067 Ultrasonic micromoulding: Process characterisation using extensive in-line monitoring for micro-scaled products Author(s): Mert Gülçür, Elaine Brown, Tim Gough, Jean-Michel Romano, Pavel Penchev, Stefan Dimov, Ben Whiteside Published in: Journal of Manufacturing Processes, Issue 58, 2020, Page(s) 289-301, ISSN 1526-6125 Publisher: Elsevier BV DOI: 10.1016/j.jmapro.2020.08.033 Laser induced ripples’ gratings with angular periodicity for fabrication of diffraction holograms Author(s): Tahseen Jwad, Pavel Penchev, Vahid Nasrollahi, Stefan Dimov Published in: Applied Surface Science, Issue 453, 2018, Page(s) 449-456, ISSN 0169-4332 Publisher: Elsevier BV DOI: 10.1016/j.apsusc.2018.04.277 Sub-micron structuring/texturing of diamond-like carbon-coated replication masters with a femtosecond laser Author(s): Aleksandra Michalek, Shaojun Qi, Afif Batal, Pavel Penchev, Hanshan Dong, Tian Long See, Stefan Dimov Published in: Applied Physics A, Issue 126/2, 2020, ISSN 0947-8396 Publisher: Springer Verlag DOI: 10.1007/s00339-020-3303-4 Experimental investigation of processing disturbances in laser surface patterning Author(s): A. Garcia-Giron, J.M. Romano, A. Batal, A. Michałek, P. Penchev, S.S. Dimov Published in: Optics and Lasers in Engineering, Issue 126, 2020, Page(s) 105900, ISSN 0143-8166 Publisher: Elsevier BV DOI: 10.1016/j.optlaseng.2019.105900 Intellectual Property Rights Patent (1) METHOD FOR FORMING A FILM OF PARTICLES ON THE SURFACE OF A SUBSTRATE Application/Publication number: 20 20060329 Date: 2020-04-10 Applicant(s): COMMISSARIAT A L ENERGIE ATOMIQUE ET AUX ENERGIES ALTERNATIVES Searching for OpenAIRE data... There was an error trying to search data from OpenAIRE No results available
