Leistungen
Report of Task 64
Automotive in-cabin components demonstrator productionFirst report about Task 63
Simulation data for input into WP 4The efficiency of microstructure replication on thermoplastic parts via IM will be modelled. It will require inputs from the injection moulding process and the part metrology. The software to be developed53 will simulate the replication efficiency of the microstructures on the polymer part surface, taking into account the part geometry, the polymer material behavior and the IM process parameters.The resulting demonstrator is expected to serve as a production assistant-tool enabling one to control the process parameters and the resulting part quality, while facilitating the manufacturing of such functional parts.
Orthodontics demonstrator productionReport of Task 64
IPC will lead CRF EO and Alba in producing guidelines for implementing the HIMALAIAs technology at factory level It is essential for the consortium to be able to provide companies especially SMEs with such guidelines after the project in order to ensure the sustainability of the HIMALAIA platforms and technology towards 2030
Public summary of the specifications of all three demonstratorsThis public summary of the results of Tasks 1.1, 1.2 and 1.3 will enable dissemination whilst not compromising partners' IP.
Communication toolsCommunication tools will include the logo, poster, video, brochure and website.
Minutes of the Meeting with complementary projectsWith the goal of networking concertation and exchange of best practices this report will document a meeting with representatives from complementary projects The report will address bestpractices and joint actions regarding scientific standardisation economic and regulatory issues related to projects results
Report on Life Cycle AssessmentReport of Task 61
Report on new paradigms and ICT tools for HIMALAIA’s technological integration with scenario for broad industrial implementationThis report is linked to Task 56It will report methodologies as well as ICT tools which could enable the rapid integration of advanced IM technologies for the replication of parts with micron and submicron surface structures in current industries Those tools will be related to product design smart manufacturing planning resource management tools for efficient humanmachine interaction logistics etc
Best Practices for IM-based PlatformThis report is linked to Task 56 IPC as task Leader will identify best practices to assist industrial integration of at the factory level UBradford and UoB will participate in the identification of methodology for product design based manufacturing of micron and submicron structures via IM replication CRF EO and Alba will provide feedback about industrial needs at the factory level GFMS and Alicona will provide the consortium with data relevant to the integration and interoperability of hardware and equipment into connected factories
Report on technology transfer towards companies and EU daughter platforms for a 2030 strengthened European manufacturing industryThis will serve as the final report of Task 84
Input to standards concerning functional surfacesThis will be the output of Task 74
The DMP will describe the project’s policy concerning any shared data. It will serve to ensure that any shared data is findable, accessible, interoperable and re-usable (FAIR). It will cover the handling, curation and preservation of research data during and after the end of the project. It will summarise what data will be collected, what data will be shared and via what methodology and standards it will be shared.
This will be the result of Task 76
A multifunctional tool design will be developed and manufactured to study the influence of process variants (rapid mould temperature cycling, inductive heating, injection compression, cavity evacuation, ultrasonic ejection) on the replication of patterns produced on simple inserts. The tool design will be a small scale, low cost concept that can accept a standard insert, allowing parallel studies on different moulding hardware at the UBradford and IPC facilities. Multiple variants of the insert will have a range of surface geometries and laser-prepared patterns which are representative of the end user devices.
Veröffentlichungen
Autoren:
Jean-Michel Romano, Rajib Ahmed, Antonio Garcia-Giron, Pavel Penchev, Haider Butt, Olivier Delléa, Melissa Sikosana, Ralf Helbig, Carsten Werner, Stefan Dimov
Veröffentlicht in:
Journal of Micro and Nano-Manufacturing, Ausgabe 7/1, 2019, ISSN 2166-0468
Herausgeber:
ASME
DOI:
10.1115/1.4042964
Autoren:
Aleksandra Michalek, Tahseen Jwad, Pavel Penchev, Tian Long See, Stefan Dimov
Veröffentlicht in:
Journal of Micro and Nano-Manufacturing, Ausgabe 8/1, 2020, ISSN 2166-0468
Herausgeber:
ASME
DOI:
10.1115/1.4045681
Autoren:
Federico Baruffi, Mert Gülçür, Matteo Calaon, Jean-Michel Romano, Pavel Penchev, Stefan Dimov, Ben Whiteside, Guido Tosello
Veröffentlicht in:
Journal of Manufacturing Processes, Ausgabe 47, 2019, Seite(n) 367-381, ISSN 1526-6125
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jmapro.2019.08.017
Autoren:
A. Garcia-Giron, J.M. Romano, Y. Liang, B. Dashtbozorg, H. Dong, P. Penchev, S.S. Dimov
Veröffentlicht in:
Applied Surface Science, Ausgabe 439, 2018, Seite(n) 516-524, ISSN 0169-4332
Herausgeber:
Elsevier BV
DOI:
10.1016/j.apsusc.2018.01.012
Autoren:
Reshma Y Siddiquie, Anvesh Gaddam, Amit Agrawal, Stefan S. Dimov, Suhas S. Joshi
Veröffentlicht in:
Langmuir, Ausgabe 36/19, 2020, Seite(n) 5349-5358, ISSN 0743-7463
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.langmuir.0c00753
Autoren:
A. Garcia-Giron, J. M. Romano, A. Batal, B. Dashtbozorg, H. Dong, E. Martinez Solanas, D. Urrutia Angos, M. Walker, P. Penchev, S. S. Dimov
Veröffentlicht in:
Langmuir, Ausgabe 35/15, 2019, Seite(n) 5353-5363, ISSN 0743-7463
Herausgeber:
American Chemical Society
DOI:
10.1021/acs.langmuir.9b00398
Autoren:
Jean-Michel Romano, Mert Gulcur, Antonio Garcia-Giron, Elena Martinez-Solanas, Ben R. Whiteside, Stefan S. Dimov
Veröffentlicht in:
Applied Surface Science, Ausgabe 476, 2019, Seite(n) 850-860, ISSN 0169-4332
Herausgeber:
Elsevier BV
DOI:
10.1016/j.apsusc.2019.01.162
Autoren:
Mert Gülçür, Jean-Michel Romano, Pavel Penchev, Tim Gough, Elaine Brown, Stefan Dimov, Ben Whiteside
Veröffentlicht in:
CIRP Journal of Manufacturing Science and Technology, Ausgabe 32, 2021, Seite(n) 311-321, ISSN 1755-5817
Herausgeber:
Elsevier BV
DOI:
10.1016/j.cirpj.2021.01.015
Autoren:
Jean-Michel Romano, Jorge Fantova Sarasa, Carlos Concheso, Mert Gulcur, Behnam Dashtbozorg, Antonio Garcia-Giron, Pavel Penchev, Hanshan Dong, Ben R. Whiteside, Stefan Dimov
Veröffentlicht in:
Tribology - Materials, Surfaces & Interfaces, Ausgabe 14/4, 2020, Seite(n) 240-252, ISSN 1751-5831
Herausgeber:
Maney Publishing
DOI:
10.1080/17515831.2020.1785234
Autoren:
Afif Batal, Aleksandra Michalek, Antonio Garcia-Giron, Vahid Nasrollahi, Pavel Penchev, Rachel Sammons, Stefan Dimov
Veröffentlicht in:
Advanced Optical Technologies, Ausgabe 9/1-2, 2020, Seite(n) 67-78, ISSN 2192-8584
Herausgeber:
De Gruyter
DOI:
10.1515/aot-2019-0051
Autoren:
Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Stefan Dimov
Veröffentlicht in:
Applied Surface Science, Ausgabe 440, 2018, Seite(n) 162-169, ISSN 0169-4332
Herausgeber:
Elsevier BV
DOI:
10.1016/j.apsusc.2018.01.086
Autoren:
Jean-Michel Romano, Ralf Helbig, Fotis Fraggelakis, Antonio Garcia-Giron, Carsten Werner, Rainer Kling, Stefan Dimov
Veröffentlicht in:
Journal of Micro and Nano-Manufacturing, Ausgabe 7/2, 2019, ISSN 2166-0468
Herausgeber:
ASME
DOI:
10.1115/1.4043417
Autoren:
Themistoklis Karkantonis, Anvesh Gaddam, Tian Long See, Suhas S. Joshi, Stefan Dimov
Veröffentlicht in:
Surface and Coatings Technology, Ausgabe 399, 2020, Seite(n) 126166, ISSN 0257-8972
Herausgeber:
Elsevier BV
DOI:
10.1016/j.surfcoat.2020.126166
Autoren:
A. Batal, A. Michalek, P. Penchev, A. Kupisiewicz, S. Dimov
Veröffentlicht in:
International Journal of Machine Tools and Manufacture, Ausgabe 156, 2020, Seite(n) 103593, ISSN 0890-6955
Herausgeber:
Elsevier BV
DOI:
10.1016/j.ijmachtools.2020.103593
Autoren:
Shaojun Qi, Xiaoying Li, Hanshan Dong
Veröffentlicht in:
Wear, Ausgabe 426-427, 2019, Seite(n) 228-238, ISSN 0043-1648
Herausgeber:
Elsevier BV
DOI:
10.1016/j.wear.2018.12.069
Autoren:
Anvesh Gaddam, Himani Sharma, Themistoklis Karkantonis, Stefan Dimov
Veröffentlicht in:
Applied Surface Science, Ausgabe 552, 2021, Seite(n) 149443, ISSN 0169-4332
Herausgeber:
Elsevier BV
DOI:
10.1016/j.apsusc.2021.149443
Autoren:
Behnam Dashtbozorg, Xiaoying Li, Jean–Michel Romano, Antonio Garcia–Giron, Rachel L. Sammons, Stefan Dimov, Hanshan Dong
Veröffentlicht in:
Applied Surface Science, Ausgabe 511, 2020, Seite(n) 145557, ISSN 0169-4332
Herausgeber:
Elsevier BV
DOI:
10.1016/j.apsusc.2020.145557
Autoren:
Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Mert Gulcur, Ben R. Whiteside, Stefan Dimov
Veröffentlicht in:
Journal of Micro and Nano-Manufacturing, Ausgabe 8/1, 2020, ISSN 2166-0468
Herausgeber:
Lawrence Kulinsky
DOI:
10.1115/1.4046097
Autoren:
Aleksandra Michalek, Afif Batal, Shaojun Qi, Pavel Penchev, David Bruneel, Tian Long See, Stefan Dimov
Veröffentlicht in:
Applied Surface Science Advances, Ausgabe 2, 2020, Seite(n) 100036, ISSN 2666-5239
Herausgeber:
Elsevier B.V.
DOI:
10.1016/j.apsadv.2020.100036
Autoren:
Afif Batal, Rachel Sammons, Stefan Dimov
Veröffentlicht in:
Materials Science and Engineering: C, Ausgabe 98, 2019, Seite(n) 1005-1013, ISSN 0928-4931
Herausgeber:
Elsevier BV
DOI:
10.1016/j.msec.2019.01.067
Autoren:
Mert Gülçür, Elaine Brown, Tim Gough, Jean-Michel Romano, Pavel Penchev, Stefan Dimov, Ben Whiteside
Veröffentlicht in:
Journal of Manufacturing Processes, Ausgabe 58, 2020, Seite(n) 289-301, ISSN 1526-6125
Herausgeber:
Elsevier BV
DOI:
10.1016/j.jmapro.2020.08.033
Autoren:
Tahseen Jwad, Pavel Penchev, Vahid Nasrollahi, Stefan Dimov
Veröffentlicht in:
Applied Surface Science, Ausgabe 453, 2018, Seite(n) 449-456, ISSN 0169-4332
Herausgeber:
Elsevier BV
DOI:
10.1016/j.apsusc.2018.04.277
Autoren:
Aleksandra Michalek, Shaojun Qi, Afif Batal, Pavel Penchev, Hanshan Dong, Tian Long See, Stefan Dimov
Veröffentlicht in:
Applied Physics A, Ausgabe 126/2, 2020, ISSN 0947-8396
Herausgeber:
Springer Verlag
DOI:
10.1007/s00339-020-3303-4
Autoren:
A. Garcia-Giron, J.M. Romano, A. Batal, A. Michałek, P. Penchev, S.S. Dimov
Veröffentlicht in:
Optics and Lasers in Engineering, Ausgabe 126, 2020, Seite(n) 105900, ISSN 0143-8166
Herausgeber:
Elsevier BV
DOI:
10.1016/j.optlaseng.2019.105900
Rechte des geistigen Eigentums
Antrags-/Publikationsnummer:
20
20060329
Datum:
2020-04-10
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor