Resultado final
Report of Task 64
Automotive in-cabin components demonstrator productionFirst report about Task 63
Simulation data for input into WP 4The efficiency of microstructure replication on thermoplastic parts via IM will be modelled. It will require inputs from the injection moulding process and the part metrology. The software to be developed53 will simulate the replication efficiency of the microstructures on the polymer part surface, taking into account the part geometry, the polymer material behavior and the IM process parameters.The resulting demonstrator is expected to serve as a production assistant-tool enabling one to control the process parameters and the resulting part quality, while facilitating the manufacturing of such functional parts.
Orthodontics demonstrator productionReport of Task 64
IPC will lead CRF EO and Alba in producing guidelines for implementing the HIMALAIAs technology at factory level It is essential for the consortium to be able to provide companies especially SMEs with such guidelines after the project in order to ensure the sustainability of the HIMALAIA platforms and technology towards 2030
Public summary of the specifications of all three demonstratorsThis public summary of the results of Tasks 1.1, 1.2 and 1.3 will enable dissemination whilst not compromising partners' IP.
Communication toolsCommunication tools will include the logo, poster, video, brochure and website.
Minutes of the Meeting with complementary projectsWith the goal of networking concertation and exchange of best practices this report will document a meeting with representatives from complementary projects The report will address bestpractices and joint actions regarding scientific standardisation economic and regulatory issues related to projects results
Report on Life Cycle AssessmentReport of Task 61
Report on new paradigms and ICT tools for HIMALAIA’s technological integration with scenario for broad industrial implementationThis report is linked to Task 56It will report methodologies as well as ICT tools which could enable the rapid integration of advanced IM technologies for the replication of parts with micron and submicron surface structures in current industries Those tools will be related to product design smart manufacturing planning resource management tools for efficient humanmachine interaction logistics etc
Best Practices for IM-based PlatformThis report is linked to Task 56 IPC as task Leader will identify best practices to assist industrial integration of at the factory level UBradford and UoB will participate in the identification of methodology for product design based manufacturing of micron and submicron structures via IM replication CRF EO and Alba will provide feedback about industrial needs at the factory level GFMS and Alicona will provide the consortium with data relevant to the integration and interoperability of hardware and equipment into connected factories
Report on technology transfer towards companies and EU daughter platforms for a 2030 strengthened European manufacturing industryThis will serve as the final report of Task 84
Input to standards concerning functional surfacesThis will be the output of Task 74
The DMP will describe the project’s policy concerning any shared data. It will serve to ensure that any shared data is findable, accessible, interoperable and re-usable (FAIR). It will cover the handling, curation and preservation of research data during and after the end of the project. It will summarise what data will be collected, what data will be shared and via what methodology and standards it will be shared.
This will be the result of Task 76
A multifunctional tool design will be developed and manufactured to study the influence of process variants (rapid mould temperature cycling, inductive heating, injection compression, cavity evacuation, ultrasonic ejection) on the replication of patterns produced on simple inserts. The tool design will be a small scale, low cost concept that can accept a standard insert, allowing parallel studies on different moulding hardware at the UBradford and IPC facilities. Multiple variants of the insert will have a range of surface geometries and laser-prepared patterns which are representative of the end user devices.
Publicaciones
Autores:
Jean-Michel Romano, Rajib Ahmed, Antonio Garcia-Giron, Pavel Penchev, Haider Butt, Olivier Delléa, Melissa Sikosana, Ralf Helbig, Carsten Werner, Stefan Dimov
Publicado en:
Journal of Micro and Nano-Manufacturing, Edición 7/1, 2019, ISSN 2166-0468
Editor:
ASME
DOI:
10.1115/1.4042964
Autores:
Aleksandra Michalek, Tahseen Jwad, Pavel Penchev, Tian Long See, Stefan Dimov
Publicado en:
Journal of Micro and Nano-Manufacturing, Edición 8/1, 2020, ISSN 2166-0468
Editor:
ASME
DOI:
10.1115/1.4045681
Autores:
Federico Baruffi, Mert Gülçür, Matteo Calaon, Jean-Michel Romano, Pavel Penchev, Stefan Dimov, Ben Whiteside, Guido Tosello
Publicado en:
Journal of Manufacturing Processes, Edición 47, 2019, Página(s) 367-381, ISSN 1526-6125
Editor:
Elsevier BV
DOI:
10.1016/j.jmapro.2019.08.017
Autores:
A. Garcia-Giron, J.M. Romano, Y. Liang, B. Dashtbozorg, H. Dong, P. Penchev, S.S. Dimov
Publicado en:
Applied Surface Science, Edición 439, 2018, Página(s) 516-524, ISSN 0169-4332
Editor:
Elsevier BV
DOI:
10.1016/j.apsusc.2018.01.012
Autores:
Reshma Y Siddiquie, Anvesh Gaddam, Amit Agrawal, Stefan S. Dimov, Suhas S. Joshi
Publicado en:
Langmuir, Edición 36/19, 2020, Página(s) 5349-5358, ISSN 0743-7463
Editor:
American Chemical Society
DOI:
10.1021/acs.langmuir.0c00753
Autores:
A. Garcia-Giron, J. M. Romano, A. Batal, B. Dashtbozorg, H. Dong, E. Martinez Solanas, D. Urrutia Angos, M. Walker, P. Penchev, S. S. Dimov
Publicado en:
Langmuir, Edición 35/15, 2019, Página(s) 5353-5363, ISSN 0743-7463
Editor:
American Chemical Society
DOI:
10.1021/acs.langmuir.9b00398
Autores:
Jean-Michel Romano, Mert Gulcur, Antonio Garcia-Giron, Elena Martinez-Solanas, Ben R. Whiteside, Stefan S. Dimov
Publicado en:
Applied Surface Science, Edición 476, 2019, Página(s) 850-860, ISSN 0169-4332
Editor:
Elsevier BV
DOI:
10.1016/j.apsusc.2019.01.162
Autores:
Mert Gülçür, Jean-Michel Romano, Pavel Penchev, Tim Gough, Elaine Brown, Stefan Dimov, Ben Whiteside
Publicado en:
CIRP Journal of Manufacturing Science and Technology, Edición 32, 2021, Página(s) 311-321, ISSN 1755-5817
Editor:
Elsevier BV
DOI:
10.1016/j.cirpj.2021.01.015
Autores:
Jean-Michel Romano, Jorge Fantova Sarasa, Carlos Concheso, Mert Gulcur, Behnam Dashtbozorg, Antonio Garcia-Giron, Pavel Penchev, Hanshan Dong, Ben R. Whiteside, Stefan Dimov
Publicado en:
Tribology - Materials, Surfaces & Interfaces, Edición 14/4, 2020, Página(s) 240-252, ISSN 1751-5831
Editor:
Maney Publishing
DOI:
10.1080/17515831.2020.1785234
Autores:
Afif Batal, Aleksandra Michalek, Antonio Garcia-Giron, Vahid Nasrollahi, Pavel Penchev, Rachel Sammons, Stefan Dimov
Publicado en:
Advanced Optical Technologies, Edición 9/1-2, 2020, Página(s) 67-78, ISSN 2192-8584
Editor:
De Gruyter
DOI:
10.1515/aot-2019-0051
Autores:
Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Stefan Dimov
Publicado en:
Applied Surface Science, Edición 440, 2018, Página(s) 162-169, ISSN 0169-4332
Editor:
Elsevier BV
DOI:
10.1016/j.apsusc.2018.01.086
Autores:
Jean-Michel Romano, Ralf Helbig, Fotis Fraggelakis, Antonio Garcia-Giron, Carsten Werner, Rainer Kling, Stefan Dimov
Publicado en:
Journal of Micro and Nano-Manufacturing, Edición 7/2, 2019, ISSN 2166-0468
Editor:
ASME
DOI:
10.1115/1.4043417
Autores:
Themistoklis Karkantonis, Anvesh Gaddam, Tian Long See, Suhas S. Joshi, Stefan Dimov
Publicado en:
Surface and Coatings Technology, Edición 399, 2020, Página(s) 126166, ISSN 0257-8972
Editor:
Elsevier BV
DOI:
10.1016/j.surfcoat.2020.126166
Autores:
A. Batal, A. Michalek, P. Penchev, A. Kupisiewicz, S. Dimov
Publicado en:
International Journal of Machine Tools and Manufacture, Edición 156, 2020, Página(s) 103593, ISSN 0890-6955
Editor:
Elsevier BV
DOI:
10.1016/j.ijmachtools.2020.103593
Autores:
Shaojun Qi, Xiaoying Li, Hanshan Dong
Publicado en:
Wear, Edición 426-427, 2019, Página(s) 228-238, ISSN 0043-1648
Editor:
Elsevier BV
DOI:
10.1016/j.wear.2018.12.069
Autores:
Anvesh Gaddam, Himani Sharma, Themistoklis Karkantonis, Stefan Dimov
Publicado en:
Applied Surface Science, Edición 552, 2021, Página(s) 149443, ISSN 0169-4332
Editor:
Elsevier BV
DOI:
10.1016/j.apsusc.2021.149443
Autores:
Behnam Dashtbozorg, Xiaoying Li, Jean–Michel Romano, Antonio Garcia–Giron, Rachel L. Sammons, Stefan Dimov, Hanshan Dong
Publicado en:
Applied Surface Science, Edición 511, 2020, Página(s) 145557, ISSN 0169-4332
Editor:
Elsevier BV
DOI:
10.1016/j.apsusc.2020.145557
Autores:
Jean-Michel Romano, Antonio Garcia-Giron, Pavel Penchev, Mert Gulcur, Ben R. Whiteside, Stefan Dimov
Publicado en:
Journal of Micro and Nano-Manufacturing, Edición 8/1, 2020, ISSN 2166-0468
Editor:
Lawrence Kulinsky
DOI:
10.1115/1.4046097
Autores:
Aleksandra Michalek, Afif Batal, Shaojun Qi, Pavel Penchev, David Bruneel, Tian Long See, Stefan Dimov
Publicado en:
Applied Surface Science Advances, Edición 2, 2020, Página(s) 100036, ISSN 2666-5239
Editor:
Elsevier B.V.
DOI:
10.1016/j.apsadv.2020.100036
Autores:
Afif Batal, Rachel Sammons, Stefan Dimov
Publicado en:
Materials Science and Engineering: C, Edición 98, 2019, Página(s) 1005-1013, ISSN 0928-4931
Editor:
Elsevier BV
DOI:
10.1016/j.msec.2019.01.067
Autores:
Mert Gülçür, Elaine Brown, Tim Gough, Jean-Michel Romano, Pavel Penchev, Stefan Dimov, Ben Whiteside
Publicado en:
Journal of Manufacturing Processes, Edición 58, 2020, Página(s) 289-301, ISSN 1526-6125
Editor:
Elsevier BV
DOI:
10.1016/j.jmapro.2020.08.033
Autores:
Tahseen Jwad, Pavel Penchev, Vahid Nasrollahi, Stefan Dimov
Publicado en:
Applied Surface Science, Edición 453, 2018, Página(s) 449-456, ISSN 0169-4332
Editor:
Elsevier BV
DOI:
10.1016/j.apsusc.2018.04.277
Autores:
Aleksandra Michalek, Shaojun Qi, Afif Batal, Pavel Penchev, Hanshan Dong, Tian Long See, Stefan Dimov
Publicado en:
Applied Physics A, Edición 126/2, 2020, ISSN 0947-8396
Editor:
Springer Verlag
DOI:
10.1007/s00339-020-3303-4
Autores:
A. Garcia-Giron, J.M. Romano, A. Batal, A. Michałek, P. Penchev, S.S. Dimov
Publicado en:
Optics and Lasers in Engineering, Edición 126, 2020, Página(s) 105900, ISSN 0143-8166
Editor:
Elsevier BV
DOI:
10.1016/j.optlaseng.2019.105900
Derechos de propiedad intelectual
Número de solicitud/publicación:
20
20060329
Fecha:
2020-04-10
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles