Service Oriented Grid for the Network of the Future

Informazioni relative al progetto

SOGNO

ID dell’accordo di sovvenzione: 774613

DOI

10.3030/774613

Progetto chiuso

Data della firma CE 20 Novembre 2017

Data di avvio 1 Gennaio 2018

Data di completamento 30 Giugno 2020

Finanziato da

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Costo totale

€ 3 999 945,00

Contributo UE

€ 3 999 945,00

Coordinato da

ERICSSON GMBH
Germany

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (17)

Description of initial Interfaces & services for grid awareness

The first results on service and interface definition for grid awareness will be described in this deliverable as basis for further developments.

Validation of the techniques for grid awareness and their interfaces and services for grid awareness

This deliverable describes the developed techniques for grid awareness and provides results of the validation. In addition, the service definitions and the developed specification of interfaces will be described here.

Recommendations to policy makers, enterprises (business model design) and other stakeholder groups for designing regulatory frameworks and incentive systems, including CSR guidelines for business models in the energy sector

This Deliverable will address the best way to gain the society’s and the policy makers’ acceptance, by identifying critical environmental and societal impacts and considering necessary adjustments. As a basis for these adjustments, relevant CSR guidelines will be developed and recommendations to policy makers, enterprises (business model design) and other stakeholder groups for designing regulatory frameworks and incentive systems will be provided. The Deliverable will provide Conclusions and recommendations based on the assessment of different technologies for the design of the regulatory framework of SOGNO and for setting incentives to realise environmentally and societally compatible business models developed in SOGNO.

Description of new SOGNO techniques for autonomous and self-healing power systems

The documentation provides a repository of new data-driven intelligent services to promptly react to instantaneous demands and adversarial situations by self-reconfiguration and restoring. Design and implementation of each service is precisely documented which includes the choice of big data analytics and specifically prescribing deep learning architectures according to the collected data from electricity distribution grid. Data management and distributed computing architecture for each service are specified.

Report on events

This deliverable give a report on all SOGNO dissemination events and assess the results of these events regarding the intended communication goals. It will provide recommendations regarding the future exploitation of project results

Definition of overall SOGNO System Architecture

This deliverable will provide the definition of the system architecture relates to scenarios and requirements of the use cases and how it takes into account relevant public policies, such as the SET plan. The System Architecture description and representation will be presented to support reasoning and behaviors of the system.

Detailed description of 5G based ICT concepts for supporting grid awareness

This deliverable will provide a description of the selected 5G based ICT concept for grid awareness support as well as results from the respective lab testing of the solutions.

Evaluation of Scalability and Performance

Upon the successful outcome of D5.1and D5.2, D5.3 will examine and validate the scalability of this virtual control concept to a national and European grid scale. The report will appraise the overall capabilities of the concepts to meet the anticipated levels of control in an active electrical system with high levels of RES. It is envisaged that the different algorithms and software will be validated within the deliverable based on outcomes of live trials on the MV and LV networks in Ireland.

CSR aspects (environmental and societal impacts) of the identified value chain designs

One of the main focus of this Deliverable lies on the relevant CSR aspects of business models and value chains. Based on CSR requirements discussed with the project partners, this Deliverable will identify and quantify relevant societal and environmental impacts of SOGNO, using impact assessment methodologies, and evaluating CSR aspects of infrastructural changes and the respective business models.

Report on fostering support for SOGNO codes and ancillary services

This deliverable will report on the project activities in Standard Development Organisations and political framework setting institutions and assess the results of these activities of how the SOGNO ideas and concepts were taken on by these organisations.

Identification of economically feasible value chain designs

A comprehensive analysis of the economic feasibility for different value chains designs as the result of other work packages will be provided in this Deliverable. The analysis will emphasise the cost and revenues streams of the entire value chain and investigate how these aggregate results can lead to profitable business models on the level of individual economic entities.

Evaluation of potential new business model opportunities

New business models with a shift in market shares and institutional influence to existing or new established actors will be developed by SOGNO. This will be fully in line with the proposed new designs of energy systems developed in the Project.

Validation and description of the techniques, interfaces and services for autonomous & self-healing power systems

The developed services are validated in scenarios defined in WP1.

Description of initial Interfaces & services for autonomous and self-healing power systems

Relevant societal and environmental impacts of SOGNO are identified and quantified using impact assessment methodologies, and evaluating CSR aspects of infrastructural changes and the respective business models. Draft and detailed documentation of interfaces between the services and control systems, SCADA systems and other systems and services is provided. The interfaces will be build based on commonly used protocols, like IEC 61850, IEC 61968 and DNP3.

Analysis of SOGNO results regarding standards and regulations

This deliverable will provide a detailed analysis addressing the Project results, in particular on standards regulations looking at market results in the coming 5 - 10 years. The potential needs in the field of standards and regulations will be identified so that market can easily adapt the new technologies developed in SOGNO and the new adjustments proposed by SOGNO in the existing network codes.

Report on marketing tools

The purpose of this deliverable is to report on all initial communication and marketing activities of the entire project, and to provide an assessment of the measures taken as a preparation for the exploitation activities of the project results.

Detailed description of 5G based ICT concepts for autonomous and self-healing power systems

System level simulation activities on specific set of scenarios defined in the above work packages will be conducted considering extreme communication network conditions (network congestion). This includes characterisation of the transmission over the air of message streams generated by the virtualised sub-station automation of SOGNO and optimisation of the over the air transmission of these message streams.

Pubblicazioni

Peer reviewed articles (7)

Design and Accuracy Analysis of Multilevel State Estimation Based on Smart Metering Infrastructure

Autori: Marco Pau, Edoardo Patti, Luca Barbierato, Abouzar Estebsari, Enrico Pons, Ferdinanda Ponci, Antonello Monti
Pubblicato in: IEEE Transactions on Instrumentation and Measurement, 2018, Pagina/e 1-13, ISSN 0018-9456
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2018.2890399

A General Easy-to-Use Expression for Uncertainty Evaluation in Residual Voltage Measurement

Autori: Alessandro Mingotti, Annalisa Baldi, Lorenzo Peretto, Roberto Tinarelli
Pubblicato in: IEEE Transactions on Instrumentation and Measurement, Numero 69/4, 2020, Pagina/e 1576-1584, ISSN 0018-9456
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/TIM.2019.2917694

A Simple Calibration Procedure for an LPIT plus PMU System Under Off-Nominal Conditions

Autori: Alessandro Mingotti, Lorenzo Peretto, Roberto Tinarelli, Andrea Angioni, Antonello Monti, Ferdinanda Ponci
Pubblicato in: Energies, Numero 12/24, 2019, Pagina/e 4645, ISSN 1996-1073
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en12244645

Multi-Area Parallel Data-Driven Three-Phase Distribution System State Estimation Using Synchrophasor Measurements

Autori: Behzad Zargar, Andrea Angioni, Ferdinanda Ponci, Antonello Monti
Pubblicato in: IEEE Transactions on Instrumentation and Measurement, 2020, Pagina/e 1-1, ISSN 0018-9456
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2020.2967512

New Kalman Filter Approach Exploiting Frequency Knowledge for Accurate PMU-based Power System State Estimation

Autori: Carlo Muscas, Paolo Attilio Pegoraro, Sara Sulis, Marco Pau, Ferdinanda Ponci, Antonello Monti
Pubblicato in: IEEE Transactions on Instrumentation and Measurement, 2020, Pagina/e 1-1, ISSN 0018-9456
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2020.2977744

A Coordinated Voltage Control for Overvoltage Mitigation in LV Distribution Grids

Autori: Edoardo De Din, Marco Pau, Ferdinanda Ponci, Antonello Monti
Pubblicato in: Energies, Numero 13/8, 2020, Pagina/e 2007, ISSN 1996-1073
Editore: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en13082007

Error Model in Single Board Computer based Phasor Measurement Units

Autori: Carlo Guarnieri Calo Carducci, Gianluca Lipari, Nicola Giaquinto, Ferdinanda Ponci, Antonello Monti
Pubblicato in: IEEE Transactions on Instrumentation and Measurement, 2020, Pagina/e 1-1, ISSN 0018-9456
Editore: Institute of Electrical and Electronics Engineers
DOI: 10.1109/tim.2020.2967245

Conference proceedings (12)

Feature-Selection based PMU Placement for Detection of Faults in Power Grids

Autori: Rana Alhalaseh, Halil Alper Tokel, Subhodeep Chakraborty, Gholamreza Alirezaei, Rudolf Mathar
Pubblicato in: 2018 28th International Telecommunication Networks and Applications Conference (ITNAC), 2018, Pagina/e 1-6, ISBN 978-1-5386-7177-1
Editore: IEEE
DOI: 10.1109/atnac.2018.8615290

Calibration of Synchronized Measurement System: from the Instrument Transformer to the PMU

Autori: A. Mingotti, L. Peretto, R. Tinarelli, A. Angioni, A. Monti, F. Ponci
Pubblicato in: 2018 IEEE 9th International Workshop on Applied Measurements for Power Systems (AMPS), 2018, Pagina/e 1-5, ISBN 978-1-5386-5375-3
Editore: IEEE
DOI: 10.1109/amps.2018.8494887

Optimal placement of sectionalizing switches for radial distribution grids

Autori: Pau, Marco; Ponci, Ferdinanda; Monti, Antonello
Pubblicato in: SyNERGY MED 2019, International Conference : 1st International Conference on Energy Transition in the Mediterranean Area : 28-30 May 2019, Hotel Regina Margherita, Cagliari, Sardinia, Italy<br/>1st International Conference on Energy Transition in the Mediterranean Area, SyNERGY MED, Cagliari, Italy, 2019-05-28 - 2019-05-30, Numero 1, 2019, Pagina/e 1-6
Editore: IEEE
DOI: 10.18154/RWTH-2019-09806

PMU Placement with Power Grid Partitioning for Line Outage Detection

Autori: Rana Alhalaseh, Halil Alper Tokel, Subhodeep Chakraborty, Gholamreza Alirezaei, Rudolf Mathar
Pubblicato in: 2019 4th International Conference on Smart and Sustainable Technologies (SpliTech), 2019, Pagina/e 1-6, ISBN 978-953-290-091-0
Editore: IEEE
DOI: 10.23919/splitech.2019.8783098

Online Monitoring Leads To Improve The Reliability and Sustainability of Power Grids

Autori: Doina Vornicu, Laurentia Predescu, Alessandro Mingotti, Lorenzo Peretto
Pubblicato in: CIRED 2019 Conference, 3 -6 June, Madrid, Spain, 2019
Editore: AIM
DOI: 10.34890/679

Effect of latency on state estimation uncertainty

Autori: Andrea Angioni, Marco Pau, Ferdinanda Ponci, Antonello Monti
Pubblicato in: 2019 IEEE 10th International Workshop on Applied Measurements for Power Systems (AMPS), 2019, Pagina/e 1-6, ISBN 978-1-7281-0075-3
Editore: IEEE
DOI: 10.1109/amps.2019.8897763

Impact of Network Parameters Uncertainties on Distribution Grid Power Flow

Autori: Marco Pau, Ferdinanda Ponci, Antonello Monti
Pubblicato in: 2019 International Conference on Smart Energy Systems and Technologies (SEST), 2019, Pagina/e 1-6, ISBN 978-1-7281-1156-8
Editore: IEEE
DOI: 10.1109/sest.2019.8849030

Analysis of Ratio and Phase Errors over Time for Low Power Voltage Transformers

Autori: Alessandro Mingotti, Lorenzo Peretto, Andrea Nalli, Marco Pau, Ferdinanda Ponci
Pubblicato in: 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2020, Pagina/e 1-6, ISBN 978-1-7281-4460-3
Editore: IEEE
DOI: 10.1109/i2mtc43012.2020.9128777

A New Kalman Filter Approach Including System Frequency for an Effective PMU-based Power System State Estimation

Autori: Carlo Muscas, Paolo Attilio Pegoraro, Sara Sulis, Marco Pau, Ferdinanda Ponci, Antonello Monti
Pubblicato in: 2019 IEEE 10th International Workshop on Applied Measurements for Power Systems (AMPS), 2019, Pagina/e 1-6, ISBN 978-1-7281-0075-3
Editore: IEEE
DOI: 10.1109/amps.2019.8897783

A Compressive Sensing Approach for Fault Location in Distribution Grid Branches

Autori: Daniele Carta, Paolo Attilio Pegoraro, Sara Sulis, Marco Pau, Ferdinanda Ponci, Antonello Monti
Pubblicato in: 2019 International Conference on Smart Energy Systems and Technologies (SEST), 2019, Pagina/e 1-6, ISBN 978-1-7281-1156-8
Editore: IEEE
DOI: 10.1109/sest.2019.8849151

Convolutional Neural Network Based Fault Location Detector for Power Grids

Autori: Rana Alhalaseh, Robert Kammer, Nayan Chandra Nath, Halil Alper Tokel, Rudolf Mathar
Pubblicato in: 2019 4th International Conference on Smart and Sustainable Technologies (SpliTech), 2019, Pagina/e 1-5, ISBN 978-953-290-091-0
Editore: IEEE
DOI: 10.23919/splitech.2019.8783194

A Tool for the Generation of Realistic PV Profiles for Distribution Grid Simulations

Autori: Marco Pau, Andrea Angioni, Ferdinanda Ponci, Antonello Monti
Pubblicato in: 2019 International Conference on Clean Electrical Power (ICCEP), 2019, Pagina/e 193-198, ISBN 978-1-7281-1356-2
Editore: IEEE
DOI: 10.1109/iccep.2019.8890209