Leistungen
Curricula for training and knowledge transfer will serve as a framework for WP3 and training implementation plan.
Papers in open access journalsPublished project results at least 4 scientific papers in open access journals
Advanced Additive Manufacturing HandbookUpon completion of the training all teaching material and detail reports of the topics will be documented as a handbook for future training A summary of the training material in the form of a handbook will also be made available on the INEXADAM website for open access All project consortium partners will have to create the teaching material in English and may have the option to translate the content into their own national language The Steering Committee will also review the teaching material and determine whether an NDA document is necessary to protect commercial interests and intellectual property as defined in Consortium Agreement
Home and international conferencesPublished project results in at least 4 scientific conferences
Evolution of the publications in high impact journals in the relevant research fieldsThe publications (prior the project start date) need to be encoded in the PP and a deliverable is to be created, which is referring to the number of publications listed on the Portal.
Dissemination and communication planTo be able to achieve the maximum impact of the INEX-ADAM project, it is necessary to develop a detailed dissemination and communication plan that will take into account specific approaches for each target group made up of the transportation, tool making and medical sectors. The Steering Committee will consult members of the Advisory Board to develop a detailed but feasible Dissemination and Communication plan within the first three months of the project.
DESIGN 2020 conference participationThe DESIGN 2020 conference will provide a special session dedicated to the advanced application of AM in the field of design engineering and medical devices
Report on Pilot Projects with end-usersThe successful exploitation of knowledge from WP4 as demonstrated from the 6 Pilot Projects will provide evidence that CATeh UNIZAG FSB researchers have achieved at least a proficient level of understanding in the use of AM for different target sectors
To reach all dissemination target groups the project consortium members will be encouraged to present their results to the media such as television podcasts radio interviews and blogs At the final project conference a summary of the project results will be presented
Meetings with public authoritiesRound table with public authorities and professional associations about the Future Trends of AM Quo Vadis Croatia M6 and a panel discussion on Additive Manufacturing in Croatia Today and the Future M35
Social networksProject INEXADAM will be present on social media Facebook Twitter LinkedIn and YouTube starting from M2
Project newsletterThe annual project newsletters will be generated in electronic and paper form and will be used in all dissemination activities
Project websiteOne of the main channels for communication will be the project website. To achieve a more efficient approach for mutual cooperation among the consortium partners and external stakeholders, the INEX-ADAM website will be the focal point to exchange information, transfer knowledge, share ideas and build proposals between all stakeholders.
Open air presentationsOpen air presentation will include UNIZAG FSB and CATeh Open days M16 and M27 Presentation at UNIZAG Fair during the project M16 M27 Presentation of project Scientific picnic M21 and M33
Project visibility elementsFor dissemination purposes, the visibility of the INEX-ADAM project will be defined through having a clear and consistent branding through the use of logos, standard letterheads and PowerPoint templates. All annual newsletters, flyers, posters and websites will have a standard layout with clear and consistent logos. All materials will be printed in English, but where necessary, a translation into the national language will be produced.
For the second half of the project participation in regional trade fairs will foster direct linking with industry endusers such as the BIAM 2020 industry fair in Zagreb April 2020 UNIZAG FSB will have their own booth for presentation of project results as well as to inform relevant stakeholders about ongoing and future activities of the INEXADAM project As an alternative Formnext fair in Frankfurt November 2020 and the FORMA TOOL industry fair in Celje April 2021 will also be considered
Innovative Management in INEXADAM project will be actively promoted to boost measures to encourage a new products b improved products services and their development and c the development of new business models for stakeholders from the field of AM A specific Workshop on Innovative Management will be organised to increase the knowledge for all project participants particularly for UNIZAG FSB researchers and stakeholders from transportation tooling and medical sectors The Workshop on Innovative Management will be organised as part of the Advanced Additive Manufacturing Summer School
WorkshopsTwo researchindustry workshops on Advanced Design and Application of Additive Manufacturing M18 and Advanced Material Modelling and Application of Additive Manufacturing will be organised M19 in collaboration with CTT the Croatian National Industry Clusters and the Croatian Chamber of Economy The goal of both researchindustry workshops is to educate stakeholders about AM the advantages and disadvantages of its application the INEXADAM project and the valueadded approach of implementing a digital workflow of such approaches to product and material modelling As the medical technology sector is unique and different from the transport and tooling industry a special regional technical workshop for Additive Manufacturing in Medical Application will be organised with the School of Medicine based in the University of Zagreb The goal is to introduce stakeholders from the medical sector about the possibilities and advantages of AM in this field emerging technological trends as well as to present the project results in this area This workshop would also open a dialogue of the application of AM in the public health sector in Croatia
Summer schoolsPotential endusers from target areas such as transportation tool making and the medical will increase the knowledge on the possibilities of applying AM in their business systems with a strong emphasis in advanced modelling of AM through two summer schools Advanced Additive Manufacturing Summer School for Design and Materials M21 and a Medical Modelling for Additive Manufacturing Summer School M26
Project followers databaseINEXADAM website will connect registered members from product design tool making medical sector and material producers as well as AM equipment vendors professional organisations RD institutions scientific and education institutions and RD associations to increase the awareness of AM Data about all of the registered project followers will be gathered within database on INEXADAM website
Veröffentlichungen
Autoren:
Damir Godec, Tomislav Breški, Miodrag Katalenić
Veröffentlicht in:
Tehnički glasnik, Ausgabe 14/2, 2020, Seite(n) 218-223, ISSN 1848-5588
Herausgeber:
Sveučilište Sjever
DOI:
10.31803/tg-20200525213336
Autoren:
Tomislav Breški, Lukas Hentschel, Damir Godec, Ivica Đuretek
Veröffentlicht in:
Tehnički glasnik, Ausgabe 15/4, 2021, Seite(n) 491-497, ISSN 1848-5588
Herausgeber:
Sveučilište Sjever
DOI:
10.31803/tg-20210805120621
Autoren:
Martin Spoerk, Clemens Holzer, Joamin Gonzalez-Gutierrez
Veröffentlicht in:
Journal of Applied Polymer Science, Ausgabe 137/12, 2019, Seite(n) 48545, ISSN 1097-4628
Herausgeber:
Wiley Periodicals, LLC.
DOI:
10.1002/app.48545
Autoren:
Ana Pilipović, Gorana Baršić, Marko Katić, Maja Rujnić Havstad
Veröffentlicht in:
Applied Sciences, Ausgabe 10/20, 2020, Seite(n) 7040, ISSN 2076-3417
Herausgeber:
MDPI
DOI:
10.3390/app10207040
Autoren:
A. Khudiakova, F. Arbeiter, M. Spoerk, M. Wolfahrt, D. Godec, G. Pinter
Veröffentlicht in:
Additive Manufacturing, Ausgabe Vol 28, 2019, Seite(n) 184-193, ISSN 2214-8604
Herausgeber:
Elsevier BV
DOI:
10.1016/j.addma.2019.05.006
Autoren:
Martin Spoerk, Florian Arbeiter, Ivan Raguž, Clemens Holzer, Joamin Gonzalez-Gutierrez
Veröffentlicht in:
Polymers, Ausgabe 11/8, 2019, Seite(n) 1318, ISSN 2073-4360
Herausgeber:
MDPI
DOI:
10.3390/polym11081318
Autoren:
Mladen Šercer, Damir Godec, Božidar Šantek, Roland Ludwig, Martina Andlar, Iva Rezić, Franjo Ivušić, Ana Pilipović, Damir Oros, Tonči Rezić
Veröffentlicht in:
Food technology and biotechnology, Ausgabe 57/2, 2019, Seite(n) 272-281, ISSN 1330-9862
Herausgeber:
Sveuciliste u Zagrebu
DOI:
10.17113/ftb.57.02.19.5725
Autoren:
Ana Pilipović, Tomaž Brajlih, Igor Drstvenšek
Veröffentlicht in:
Polymers, Ausgabe 10/11, 2018, Seite(n) 1208, ISSN 2073-4360
Herausgeber:
MDPI
DOI:
10.3390/polym10111208
Autoren:
Ana Pilipović, Bogdan Valentan, Mladen Šercer
Veröffentlicht in:
Rapid Prototyping Journal, Ausgabe 22/2, 2016, Seite(n) 258-268, ISSN 1355-2546
Herausgeber:
Emerald Group Publishing Ltd.
DOI:
10.1108/rpj-08-2014-0092
Autoren:
Nino Krznar, Ana Pilipović, Mladen Šercer
Veröffentlicht in:
Procedia Engineering, Ausgabe 149, 2016, Seite(n) 197-202, ISSN 1877-7058
Herausgeber:
Elsevier
DOI:
10.1016/j.proeng.2016.06.656
Autoren:
Damir Godec, Santiago Cano, Clemens Holzer, Joamin Gonzalez-Gutierrez
Veröffentlicht in:
Materials, Ausgabe 13/3, 2020, Seite(n) 774, ISSN 1996-1944
Herausgeber:
MDPI Open Access Publishing
DOI:
10.3390/ma13030774
Autoren:
Joamin Gonzalez-Gutierrez, Damir Godec, Radoslav Guráň, Martin Spoerk, Christian Kukla, Clemens Holzer
Veröffentlicht in:
Metalurgija, Ausgabe 1-2/57, 2017, Seite(n) 117-120, ISSN 0543-5846
Herausgeber:
Hrvatsko Metalursko Drustvo/Croatian Metallurgical Society
Autoren:
Igor Catic, Jasmina Caloska, Damir Godec, Marijan Kovacic, Ana Pilipovic, Karolj Skala
Veröffentlicht in:
Interdisciplinary Description of Complex Systems, Ausgabe 15/3, 2017, Seite(n) 180-189, ISSN 1334-4676
Herausgeber:
Croatian Interdisciplinary Society
DOI:
10.7906/indecs.15.3.2
Autoren:
Suzana Kutnjak-Mravlinčić, Ana Pilipović, Damir Godec
Veröffentlicht in:
12th International Scientific Conference on Production Engineering, RIM 2019 – Development and Modernization of Production, Ausgabe 18-20.09.2019, 2019, Seite(n) 455-460
Herausgeber:
University of Bihac, Faculty of Engineering Sciences
Autoren:
Damir Godec, Robert Surma, Ana Pilipović, Miodrag Katalenić
Veröffentlicht in:
10. Industrijski forum IRT 2018 Vir znanja in izkušenj za stroko, Ausgabe 04-05.06.2018, 2018, Seite(n) 177-180, ISBN 978-961-94025-4-2
Herausgeber:
Profidtp, d.o.o.
Autoren:
Damir Godec, Lea Mandić, Robert Surma, Ana Pilipović, Miodrag Katalenić
Veröffentlicht in:
11. Znanstveno - stručno savjetovanje Tekstilna znanost i gospodarstvo, Ausgabe 24.1.2018, 2018, Seite(n) 74-79
Herausgeber:
University of Zagreb, Faculty of Textile Technology
Autoren:
Ana Pilipović, Gorana Baršić, Marko Katić
Veröffentlicht in:
CIM 2017 Computer Integrated Manufacturing and High Speed Machining, Ausgabe 8-10.06.2017, 2017, Seite(n) 207-212
Herausgeber:
Croatian Association of Production Engineering
Autoren:
Ahmet Čekić, Ana Pilipović, Đerzija Begić-Hajdarević, Narudin Gorak
Veröffentlicht in:
CIM 2017 Computer Integrated Manufacturing and High Speed Machining, Ausgabe 8-10.06.2017, 2017, Seite(n) 69-72
Herausgeber:
Croatian Association of Production Engineering
Autoren:
Mladen Šercer, Damir Godec, Ana Pilipović, Miodrag Katalenić
Veröffentlicht in:
Management of Technology - Step to Sustainable production MOTSP 2017, Ausgabe 05-07.04.2017, 2017, Seite(n) 4-4
Herausgeber:
Croatian Association for PLM
Autoren:
Maja Rujnić-Sokele, Ana Pilipović, Nino Dimitrov
Veröffentlicht in:
3. hrvatski kongres zdravstvene ekologije, Ausgabe 24.-26.04.2017, 2017, Seite(n) 49-50, ISBN 978-953-7031-63-3
Herausgeber:
Hrvatski zavod za javno zdravstvo
Autoren:
Ana Pilipović, Mladen Šercer
Veröffentlicht in:
Tekstilna znanost i gospodarstvo, 10. znanstveno - stručno savjetovanje Komplementarnost znanosti, tehnologije i dizajna, Ausgabe 24.1.2017, 2017, Seite(n) 89-94
Herausgeber:
University of Zagreb, Faculty of Textile Technology
Autoren:
Nino Krznar, Ana Pilipović, Mladen Šercer
Veröffentlicht in:
International Conference on Manufacturing Engineering and Materials, ICMEM 2016, Ausgabe 06.-10.06.2016, 2016
Herausgeber:
Department of Manufacturing Technologies, Faculty of Manufacturing Technologies Technical University in Košice with a seat in Prešov
Autoren:
Ana Pilipović, Maja Rujnić-Sokele, Mladen Šercer
Veröffentlicht in:
Regional Conference Polymer Processing Society Graz 2015, PPS2015, Ausgabe 21-25.09.2015, 2015, Seite(n) 243-243
Herausgeber:
Polymer Processing Society
Autoren:
Joamin Gonzalez-Gutierrez, Damir Godec, Christian Kukla, Thomas Schlauf, Carlo Burkhardt, Clemens Holzer
Veröffentlicht in:
CIM 2017 Computer Integrated Manufacturing and High Speed Machining, Ausgabe 8-10.06.2017, 2017
Herausgeber:
Croatian Association of Production Engineering
Autoren:
Marija Smoljkić, Lana Virag, Ante Jurčević, Kristijan Kubik, Ivan Grabić, Damir Godec, Igor Karšaj
Veröffentlicht in:
10th European Solid Mechanics Conference, Ausgabe 02-06.7.2018., 2018
Herausgeber:
European Mechanics Society
Autoren:
Kutnjak-Mravlinčić, Suzana; Godec, Damir; Sutlović, Ana
Veröffentlicht in:
"VI Scientific-vocational conference ""Development tendencies in the textile industry – Design, Technology, Management""", Ausgabe 27.06.2018., 2018, ISBN 978-86-87017-42-9
Herausgeber:
The College of Textile Design, Technology and Management
Autoren:
Damir Godec, Ivan Gabrić, Ana Pilipović, Marija Smoljkić, Robert Surma
Veröffentlicht in:
10th International scientific conference MOTSP2018 Management of Technology Step to Sustainable Production, Ausgabe 06.-08.06.2018., 2018, Seite(n) 43-43
Herausgeber:
Croatian Association for PLM
Autoren:
Damir Godec, Lea Mandić, Robert Surma, Ana Pilipović, Miodrag Katalenić
Veröffentlicht in:
1. Znanstveno - stručno savjetovanje Tekstilna znanost i gospodarstvo, Ausgabe 24.01.2018., 2018, Seite(n) 74-79
Herausgeber:
University of Zagreb, Faculty of Textile Technology
Autoren:
Robert Surma, Damir Godec, Ana Pilipović
Veröffentlicht in:
International Conference on Materials, corrosion, heat treatment, testing and tribology - MTECH 2017, Ausgabe 04.-07.10.2017., 2017, Seite(n) 369-377
Herausgeber:
Croatian Society for Materials and Tribology
Autoren:
Suzana Kutnjak-Mravlinčić, Damir Godec, Ana Sutlović
Veröffentlicht in:
Zbornik radova 9. znanstveno - stručnog savjetovanja Tekstilna znanost i gospodarstvo - Kreativni mikser, Ausgabe 25.01.2016., 2016, Seite(n) 100-103
Herausgeber:
University of Zagreb, Faculty of Textile Technology
Suche nach OpenAIRE-Daten ...
Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten
Es liegen keine Ergebnisse vor