Projektbeschreibung
Ein Pilotprojekt für die additive Fertigung von Metallen
Die additive Fertigung von Metallen gestattet die Herstellung von Komponenten mit hoher Wertschöpfung, die mit herkömmlichen Fertigungsverfahren nicht erreicht werden kann. Da der Arbeitsablauf jedoch mehrere kritische Schritte beinhaltet, sind die Anwendungsmöglichkeiten von Schlüsselkompetenzen auf industrieller Ebene begrenzt. Das EU-finanzierte Projekt MANUELA wird eine frei zugängliche Pilotanlage einrichten, mit der die gesamte Produktionssequenz abgedeckt wird, um das volle Potenzial der additiven Fertigung von Metallen für die industrielle Produktion zu demonstrieren. Das Projekt stützt sich dabei auf zwei wichtige Technologien: das Laser-Pulverbettschmelzen und das Elektronenstrahlschmelzen. MANUELA wird die Maschinen sorgfältig für die Abläufe beim Laser-Pulverbettschmelzen und Elektronenstrahlschmelzen ausstatten und anpassen. Dies begünstigt eine höhere Prozesszuverlässigkeit und -geschwindigkeit sowie die Inbetriebnahme der Pilotlinie – einschließlich der angepassten Verfahren.
Ziel
Metal additive manufacturing (AM) allows, by enabling use of advanced design, production of high added value components, at levels that cannot be reached with conventional manufacturing technique.
Still, the AM-based manufacturing sequence implies large amounts of critical steps – design for AM, AM fabrication, post processing, etc. – compared to conventional production sequences. Presently, the key competencies related to these steps are either not fully implemented at industrial level (process quality monitoring) or dispersed geographically with poor connection between different steps.
Relying on two major AM technologies (LPBF: Laser Powder Bed Fusion and EBM Electron Beam Melting), MANUELA aims at deploying an open-access pilot line facility, covering the whole production sequence, to show full potential of metal AM for industrial AM production.
At first, careful instrumentation and adaptation of LPBF & EBM machines will allow increased process reliability and speed. Secondly, the pilot line – including the adapted processes – will be deployed. The hardware layer will integrate novel process quality control monitoring and automated post-AM handling and processing. The line will be fed by design/optimization and AM process simulation workshops. Those workshops will collect continuous feedback from the physical parts of the pilot lines, to increase process reliability and robustness.
MANUELA relies on a consortium composed of industrial end user’s, suppliers, (material/powder, AM hardware, quality monitoring system, software, automation and post-AM treatment) as well as top research institutes in powder-bed metal-AM, covering full range of AM technology chain for pilot line deployment.
The deployed pilot line will be validated for use cases, covering wide span of applications including automotive, aerospace, energy and medical. To insure sustainability of the deployed line and its open access at project end, a dedicated exploitation plan will be established.
Wissenschaftliches Gebiet
Schlüsselbegriffe
Programm/Programme
Aufforderung zur Vorschlagseinreichung
Andere Projekte für diesen Aufruf anzeigenUnterauftrag
H2020-NMBP-FOF-2018
Finanzierungsplan
IA - Innovation actionKoordinator
412 96 GOTEBORG
Schweden
Auf der Karte ansehen
Beteiligte (25)
2000 Neuchatel
Auf der Karte ansehen
91054 Erlangen
Auf der Karte ansehen
Beteiligung beendet
431 53 Molndal
Auf der Karte ansehen
CF24 0DE Cardiff
Auf der Karte ansehen
10129 Torino
Auf der Karte ansehen
263 83 Hoganas
Auf der Karte ansehen
20520 Turku
Auf der Karte ansehen
Beteiligung beendet
721 83 VASTERAS
Auf der Karte ansehen
10144 TORINO
Auf der Karte ansehen
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).
3084 Wabern
Auf der Karte ansehen
81829 Munchen
Auf der Karte ansehen
Rechtsträger, der nicht Auftragnehmer ist und an einen Teilnehmer angegliedert oder rechtlich mit diesem verbunden ist. Der Rechtsträger übernimmt Arbeiten zu in der Finanzhilfevereinbarung festgelegten Bedingungen, liefert Waren oder bietet Dienstleistungen für die Aktion, unterzeichnet jedoch nicht die Finanzhilfevereinbarung. Eine Drittpartei hält sich an die Regeln, die gemäß der Finanzhilfevereinbarung für den verbundenen Teilnehmer gelten hinsichtlich der Förderfähigkeit von Kosten und der Kontrolle der Ausgaben.
33010 Tavagnacco
Auf der Karte ansehen
Rechtsträger, der nicht Auftragnehmer ist und an einen Teilnehmer angegliedert oder rechtlich mit diesem verbunden ist. Der Rechtsträger übernimmt Arbeiten zu in der Finanzhilfevereinbarung festgelegten Bedingungen, liefert Waren oder bietet Dienstleistungen für die Aktion, unterzeichnet jedoch nicht die Finanzhilfevereinbarung. Eine Drittpartei hält sich an die Regeln, die gemäß der Finanzhilfevereinbarung für den verbundenen Teilnehmer gelten hinsichtlich der Förderfähigkeit von Kosten und der Kontrolle der Ausgaben.
91190 SAINT-AUBIN
Auf der Karte ansehen
612 83 FINSPANG
Auf der Karte ansehen
LL17 0LL Denbighshire, Wales
Auf der Karte ansehen
04001 Kosice
Auf der Karte ansehen
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).
Beteiligung beendet
00198 Roma
Auf der Karte ansehen
41031 Camposanto
Auf der Karte ansehen
412 58 Goteborg
Auf der Karte ansehen
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).
Beteiligung beendet
162 00 PRAHA 6
Auf der Karte ansehen
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).
1260 Nyon
Auf der Karte ansehen
162 00 Prague
Auf der Karte ansehen
00198 Roma
Auf der Karte ansehen
721 71 Vasteras
Auf der Karte ansehen
501 15 Boras
Auf der Karte ansehen