Descrizione del progetto
Verificare le prestazioni di una promettente superlega destinata ai motori UltraFan
La richiesta di motori a turbina a gas più efficienti sta promuovendo lo sviluppo di materiali con prestazioni migliori, in grado di sopportare temperature molto elevate. Le superleghe sono una soluzione molto promettente per applicazioni ad alte temperature, grazie a proprietà quali la conservazione di una forza elevata, la stabilità e la resistenza alla corrosione e all’ossidazione. Il progetto HUC, finanziato dall’UE, si occuperà della produzione di carter di turbina a pressione intermedia per il motore di nuova generazione UltraFan. Il processo produttivo consiste nella pressatura di una superlega in polvere nota come Astroloy in condizioni di pressione e temperature elevate: tale soluzione permette di ridurre notevolmente il consumo energetico rispetto al metodo tradizionale, che prevede l’utilizzo di una fucina. Attraverso Astroloy, l’obiettivo principale del progetto HUC è migliorare il rapporto buy-to-fly, trasformandolo da un valore di 9 (tipico dei processi produttivi tradizionali) a uno inferiore a 3.
Obiettivo
This is a response to the Call for Proposal under Clean Sky 2 and JU to manufacture IP Turbine casings for the new generation Ultrafan® engine from Astroloy using Net Shape Hot Isostatic Pressing of powder (NSHIP).
Astroloy with high γ’ volume fraction have the required high temperature properties but it is unforgeable. Thus, Powder-HIP is the most promising process route for this alloy though this technique presents several challenges such as presence of PPBs in the HIPped microstructure, the high cost of powder and HIP-tooling. HUC, making usage of the background technology will face and overcome these challenges and will take a step further tackling technology gaps alongside the material capability, basic mechanical behaviour and impact in the presence of the exposure with the ultimate goal for this technology to be fully tested in the relevant UltraFan® Demonstrator engine environment.
The main objective of HUC is to improve the buy to fly ratio from the typically achieved 9 through the conventional cast and wrought route to less than 3 through NNSHIP being the material developed able to withstand engine relevant conditions with and without exposure guaranteeing its ability to contain. The work plan includes the following main activities:
1. Development and Optimisation of a powder HIP processing for Astroloy
2. Characterisation of mechanical properties to generate a database which supports the component design
3. Development of experiments and numerical simulations to assess the material´s behaviour under dynamic and ballistic conditions
4. Characterisation and understanding of mechanical properties with exposure at high temperatures
5. Development of low cost tooling for HIPping high temperature superalloy casings
6. Development and validation of process modelling capabilities
7. Manufacturing of canning/tooling to guarantee the compliance of the finish product with the requirements
8. Project progress Management, Dissemination, Communication and Exploitation
Campo scientifico
Programma(i)
Meccanismo di finanziamento
CS2-IA - Innovation actionCoordinatore
20018 San Sebastian
Spagna