Descrizione del progetto
Un calcestruzzo ultra-leggero isolante per la stampa 3D
Il settore edile si affida ancora oggi a processi secolari per gestire progetti complessi. La stampa 3D con il calcestruzzo potrebbe rivoluzionare l’edilizia. Sono state condotte molte ricerche in merito, ma poca attenzione è stata rivolta allo studio di isolanti per le pareti stampate. Il progetto Ultra-LightCon-3D, finanziato dall’UE, intende colmare questa lacuna introducendo il primo materiale isolante in calcestruzzo ultraleggero (ULWC) per la stampa 3D. Questo strumento consentirà di sviluppare modelli 3D ULWC con proprietà meccaniche e isolanti ottimizzate, con conseguente riduzione dei costi e degli sprechi di calcestruzzo. Il progetto contribuirà allo sviluppo di costruzioni a risparmio energetico in linea con la strategia di efficienza energetica dell’UE.
Obiettivo
The construction industry does not follow the same enlightened path as other fields of science and has thus suffered a technology bypass, relying on centuries-old processes and procedures to manage complex modern projects. In conventional concrete construction projects, more than 60% of the total cost is spent on the formwork. One of the technologies which can revolutionize our perception and approach to construction, is 3D printing of concrete. 3D printing, also referred to as Additive Manufacturing (AM), is a technology which builds solid parts via a layer-by-layer process. Since in 3D printing, no formwork is required, and a short project time is required due to continuous work done by the printer, a dramatic reduction in the project cost and improvement of workers’ safety can be achieved. Up to date, much research has been conducted in the field of printing technique, while design of proper insulation of printed walls has gathered little attention. Although, this issue is highly important due to gradually tightening EU regulations. Therefore, proposed project is aiming to fill the gap in knowledge and introduce for the first-time insulating ultra-lightweight concrete (ULWC) material for AM. By proposed interdisciplinary methodology, based on the experimental and numerical methods, in micro- and macro-scales technology, a multi-scale tool enabling to produce advanced 3D printed wall systems. Multi-scale tool will allow to develop 3D models of ULWCs with optimized mechanical and insulating properties. Hence, limited amount of required field and labor works will be necessary, thus further decrement of the final concrete cost and waste production will be achieved. Through the interdisciplinary approach and establishing industrial cooperation, this project will contribute towards development and production of energy saving constructions in accordance with EU Energy Efficiency Strategy.
Campo scientifico
Programma(i)
Argomento(i)
Meccanismo di finanziamento
MSCA-IF-EF-ST - Standard EFCoordinatore
10623 Berlin
Germania