Projektbeschreibung
Intelligente Fertigung von Flügelelementen auf der Basis vernetzter Werkzeuge
Wird der Luftstrom um ein Flugzeug herum derart gesteuert, dass er sich laminar ausbildet, kann dies zu erheblichen Verbesserungen hinsichtlich der aerodynamischen Effizienz führen. Anhand zahlreicher Demonstratoren wurden aktive sowie passive Lösungen erfolgreich getestet. Bei der Montage von Systemen zur Steuerung laminarer Strömungen an der Tragfläche kann die erforderliche Toleranz und geometrische Präzision nur unter Zuhilfenahme komplexer Werkzeuge erlangt werden. Mit Sensoren ausgestattete Werkzeuge ermöglichen eine effizientere Überwachung von Parametern, die beim Montagevorgang eine wesentliche Rolle spielen, wie etwa der Position, akkumulierter Beanspruchungen und der Verformung. Das EU-finanzierte Projekt HLFC 4.0 wird additive Fertigungstechniken und Technologien für die Ausstattung mit Sensoren bei der Entwicklung eines aktiven und eines passiven hybriden Systems zur Steuerung laminarer Strömungen kombinieren. Das Projektkonsortium besteht aus zwei Unternehmen mit umfangreicher Erfahrung bei der Konzeption und Fertigung im Bereich Aeronautik (ADATICA) sowie bei der Gestaltung und Herstellung von Werkzeugen (ACTEMIUM).
Ziel
The use of HLFC (Hybrid Laminar Flow Control) systems is a important advantage that will improve the aerodynamic efficiency of flights significantly. Either using passive or active solutions many challenges have been tackled and demonstrators have been developed in the past.
To be able to assembly the HLFC systems to the leading edge of the wing complex tools should be developed in order to obtain aeronautic standards in terms of tolerances and geometry accuracy. Sensorization of complex tooling is a technique that allows to monitor the complete process of assembly ensuring that the process is being done in the proper way or, if not, understanding what is happening and enabling corrective actions. Build-up stress and deformations measurements, automatic best-fit positioning, sensors recording key parameters to feedback engineering assumptions and calculations, are some examples.
As part as Industry 4.0 the sensorization of tools and the use of new technologies such as additive manufacturing will be implemented in the development of this project called HLFC 4.0.
The consortium of HLFC 4.0 is formed by two leading companies with broadly experience in the fields of aeronautic design and manufacturing of systems and structures (ADATICA) and in the design and manufacturing of tools including sensorization for industry 4.0 (ACTEMIUM).
Putting everything together, this project will drive to the manufacturing of two HLFC systems, passive and active, and a sensorized tool to assemble these systems to the leading edge. Also as part of the project HLFC 4.0 and due to ADATICA expertise in DfAM (Design for Additive Manufacturing) drilling templates will be designed and manufactured using additive methods.
Wissenschaftliches Gebiet
- natural sciencesphysical sciencesclassical mechanicsfluid mechanicsfluid dynamics
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- natural sciencesmathematicspure mathematicsgeometry
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
Schlüsselbegriffe
Programm/Programme
Aufforderung zur Vorschlagseinreichung
Andere Projekte für diesen Aufruf anzeigenFinanzierungsplan
IA - Innovation actionKoordinator
28027 Madrid
Spanien
Die Organisation definierte sich zum Zeitpunkt der Unterzeichnung der Finanzhilfevereinbarung selbst als KMU (Kleine und mittlere Unternehmen).