Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

The first lubrication- and coating-free stoppers for Prefillable Syringes

Descrizione del progetto

Una nuova linea di tappi per siringhe per iniezioni più pulite e sicure

Le siringhe pre-ricaricabili (PFS, PreFillable Syringes) sono state sempre più utilizzate negli ultimi anni, grazie alla loro facilità d’uso, al dosaggio accurato, a una maggiore sicurezza e al ridotto rischio di contaminazione. Tuttavia, le PFS devono essere lubrificate, tipicamente con silicone. Ciò potrebbe interessare i composti farmaceutici che sono a diretto contatto con il lubrificante per tutta la durata di conservazione delle PFS, rendendoli meno efficaci e potenzialmente non sicuri per i pazienti. Per risolvere questo problema, il progetto LUBRIGONE, finanziato dall’UE, ha sviluppato e mira a commercializzare una nuova linea di tappi per PFS che eliminano la necessità di lubrificazione e/o rivestimento del tappo e del contenitore. I nuovi tappi proteggono i dosaggi medici dall’inquinamento e gli utenti da potenziali danni, garantendo al contempo una funzionalità ottimale.

Obiettivo

With a global value of €4,663 million in 2017, Prefillable syringes (PFS) for administration of medical injections have seen an increased use in recent years, thanks to their advantages over the combined use of empty syringes and vials, such as their ease of use, accurate dosage (with less overfill), improved safety and reduced risk of contamination
However, PFS require lubrication (usually liquid or baked-on silicone) to ensure their functionality, and this lubrication (which is in direct contact with the medical dosage in the PFS throughout its entire shelf life) may affect the pharmaceutical compounds, reducing their efficacy and causing health and safety issues for patients.
To solve this problem, we developed LUBRIGONE, a new line of PFS stoppers combining a chemically inert Thermoplastic Elastomer (TPE) and unique sealing profile designs, which eliminates the need for lubrication and/or coating of the stopper and container. In this way, LUBRIGONE enables a completely clean injection system, protecting sensitive injectables from pollution, and protecting users against potential damage, while granting an optimal functionality (maintaining an acceptable break loose force and mean forces in PFS).
Our company, Injecto A/S was founded in 2014 with the goal to develop safe medical devices with primary focus on safe PFS syringes and their stoppers, to create safe and long-term stable drug injections. As a result, the LUBRIGONE project, will be a cornerstone for us, as it will enable us to exploit the market opportunity derived from its competitive advantages over current silicone-oil coated rubber stoppers, and the lack of feasible cost-effective alternatives, In this way, it will facilitate our growth and international expansion: our forecasts are to sell 21.4 million units in the first 4 years of commercialization, resulting in €10.7 million accumulated revenues by 2024, and increasing our staff by 250%

Campo scientifico (EuroSciVoc)

Programma(i)

Argomento(i)

Meccanismo di finanziamento

SME-1 - SME instrument phase 1

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) H2020-EIC-SMEInst-2018-2020

Vedi tutti i progetti finanziati nell’ambito del bando

Coordinatore

INJECTO GROUP A/S
Contributo netto dell'UE
€ 50 000,00
Indirizzo
STRANDVEJEN 60
2900 HELLERUP
Danimarca
PMI
Sì
Regione
Danmark Hovedstaden Københavns omegn
Tipo di attività
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Collegamenti
Costo totale
€ 71 429,00