European Commission logo
English English
CORDIS - EU research results
CORDIS

Laser-induced hierarchical micro-/nano-structures for controlled cell adhesion at implants

Deliverables

Electrochemistry new findings

This deliverable is a public report on the website on new findings about on electrochemistry of anodized and additionally ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Mesenchymal stem cells new findings

This deliverable is a public report on the website on new findings about on the differentiation of mesenchymal stem cells induced by ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Images of osteoblasts on bone screws

Collection of SEM images of osteoblasts on bone screws with hierarchical spikes and ripples on the website

Images of osteoblasts on screws of dental implants

Collection of SEM images of osteoblasts on screws of dental implants with hierarchical spikes and ripples on the website

Images designed LIPSS patterns

Collection of SEM images of designed LIPSS patterns on cylindrical Tibased samples published on the website

Images hierarchical spikes and ripples

Collection of SEM images of hierarchical spikes and ripples on cylindrical Tibased samples published on the LaserImplant website

Web-site

To disseminate relevant uptodate information regarding the project a website will be set up with public and internal section

Publications

Dual-functionalized titanium by ultrafast laser texturing to enhance human gingival fibroblasts adhesion and minimize Porphyromonas gingivalis colonization

Author(s): Papa, S., Abou Khalil, A., Hamzeh-Cognasse H., Thomas, M.; Maalouf, M., Di Maio, Y., Sedao, X., Guignandon, A., and Dumas, V
Published in: Applied Surface Science, Issue 606, 2022, Page(s) 154784, ISSN 0169-4332
Publisher: Elsevier BV
DOI: 10.1016/j.apsusc.2022.154784

Ten Open Questions about Laser-Induced Periodic Surface Structures

Author(s): Jörn Bonse, Stephan Gräf
Published in: Nanomaterials, Issue 11, 2021, Page(s) 3326, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano11123326

Femtosecond Laser-Processing of Pre-Anodized Ti-Based Bone Implants for Cell-Repellent Functionalization

Author(s): Martina Muck, Benedikt Wolfsjäger, Karoline Seibert, Christian Maier, Shaukat Ali Lone, Achim Walter Hassel, Werner Baumgartner, Johannes Heitz
Published in: Nanomaterials, Issue 11/5, 2021, Page(s) 1342, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano11051342

Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses

Author(s): Luis Porta-Velilla, Neslihan Turan, Álvaro Cubero, Wei Shao, Hongtao Li, Germán F. de la Fuente, Elena Martínez, Ángel Larrea, Miguel Castro, Haluk Koralay, Şükrü Çavdar, Jörn Bonse, Luis A. Angurel
Published in: Nanomaterials, Issue 12, 2022, Page(s) 2380, ISSN 2079-4991
Publisher: MDPI
DOI: 10.3390/nano12142380

Quo Vadis LIPSS?—Recent and Future Trends on Laser-Induced Periodic Surface Structures

Author(s): Jörn Bonse
Published in: Nanomaterials, Issue 10/10, 2020, Page(s) 1950, ISSN 2079-4991
Publisher: MDPI Open Access Publishing
DOI: 10.3390/nano10101950

Key topographic parameters driving surface adhesion of Porphyromonas gingivalis

Author(s): Steve Papa; Mathieu Maalouf; Pierre Claudel; Xxx Sedao; Yoan Di Maio; Hind Hamzeh-Cognasse; Mireille Thomas; Alain Guignandon; Virginie Dumas
Published in: Scientific Reports, Issue 13, 2023, Page(s) 15893, ISSN 2045-2322
Publisher: Nature Publishing Group
DOI: 10.1038/s41598-023-42387-5

Influence of multi-wavelength ultrafast laser texturing and autoclave sterilization on titanium alloy-based surface wettability

Author(s): Pallarés-Aldeiturriaga, D., Papa, S., Abou Khalil, A. Pascale-Hamri, A., Maalouf, M., Di Maio, Y., Guignandon, A., Dumas, V., and Sedao, X
Published in: Appl. Phys. A, Issue 128, 2022, Page(s) 894, ISSN 1432-0630
Publisher: Springer
DOI: 10.1007/s00339-022-06015-9

Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon

Author(s): Camilo Florian, Daniel Fischer, Katharina Freiberg, Matthias Duwe, Mario Sahre, Stefan Schneider, Andreas Hertwig, Jörg Krüger, Markus Rettenmayr, Uwe Beck, Andreas Undisz, Jörn Bonse
Published in: Materials, Issue 14/7, 2021, Page(s) 1651, ISSN 1996-1944
Publisher: MDPI Open Access Publishing
DOI: 10.3390/ma14071651

Laser Treatment of Dental Implants toward an Optimized Osseointegration: Evaluation via Tapping-Mode Atomic Force Microscopy and Scanning Electron Microscopy

Author(s): Wiktor Luczak, Ciril Reiner-Rozman, Martina Muck, Johannes Heitz, Gergo Mitov, Florian Pfaffeneder, Constantin von See, Achim Walter Hassel, and Christoph Kleber
Published in: Physica status solidi A, Issue 2023, 2023, Page(s) 2200605, ISSN 1862-6300
Publisher: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.202200605

Polarization of Femtosecond Laser for Titanium Alloy Nanopatterning Influences Osteoblastic Differentiation

Author(s): Maalouf, M., Abou Khalil, Alain., Di Maio, Y., Papa, S., Sedao, X., Dalix, E., Peyroche, S., Guignandon, A., Dumas, V.
Published in: Nanomaterials, Issue 12, 2022, Page(s) 1619, ISSN 2079-4991
Publisher: MPDI
DOI: 10.3390/nano12101619

A Novel Screw Drive for Allogenic Headless Position Screws for Use in Osteosynthesis—A Finite-Element Analysis

Author(s): Sebastian Lifka, Werner Baumgartner
Published in: Bioengineering, Issue 8/10, 2021, Page(s) 136, ISSN 2306-5354
Publisher: MDPI
DOI: 10.3390/bioengineering8100136

Numerical study of the wetting dynamics of droplet on laser textured surfaces: Beyond classical Wenzel and Cassie-Baxter model

Author(s): Omeje. I. O., Itina, T. E.
Published in: Applied Surface Science Advances, Issue 9, 2022, Page(s) 100250, ISSN 2666-5239
Publisher: Elsevier
DOI: 10.1016/j.apsadv.2022.100250

Electrochemical and surface characterization of anodized and fs-laser treated Ti6Al4V for osseo-repellent bone screws and dental implants

Author(s): D. Knapic, M. Muck, J. Heitz, W. Baumgartner, A.I. Mardare, C. Kleber, A.W. Hassel
Published in: Electrochimica Acta, Issue 466, 2023, Page(s) 142965, ISSN 0013-4686
Publisher: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2023.142965

The Development and Biomechanical Analysis of an Allograft Interference Screw for Anterior Cruciate Ligament Reconstruction

Author(s): Sebastian Lifka, Yannik Rehberger, Klaus Pastl, Alexander Rofner-Moretti, Markus Reichkendler, Werner Baumgartner
Published in: Bioengineering, Issue 10, 2023, Page(s) 1174, ISSN 2306-5354
Publisher: MPDI
DOI: 10.3390/bioengineering10101174

EditorialNanopatterning of Bionic Materials

Author(s): Johannes Heitz
Published in: Nanomaterials, Issue 13, 2023, Page(s) 233, ISBN 9780128224014
Publisher: MDPI
DOI: 10.3390/nano13020233

Creation of Material Functions by Nanostructuring

Author(s): Marek Mezera; Camilo Florian; Gert-willem Römer; Jörg Krüger; Jörn Bonse
Published in: Springer Series in Optical Sciences, Issue 239, 2023, ISBN 978-3-031-14751-7
Publisher: Springer Nature
DOI: 10.1007/978-3-031-14752-4_23

Laser Structuring for Biomedical Applications

Author(s): Gerda Buchberger, Martina Muck, Cristina Plamadeala, Johannes Heitz
Published in: Springer Series in Optical Sciences, Issue 239, 2023, Page(s) 1105 -1165, ISSN 0342-4111
Publisher: Springer
DOI: 10.1007/978-3-031-14752-4_31

Intellectual Property Rights

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Application/Publication number: 51 1222020
Date: 2020-12-22
Applicant(s): HOFER GMBH & CO KG

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Application/Publication number: 20 21060483
Date: 2021-12-22
Applicant(s): HOFER GMBH & CO KG

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Application/Publication number: 51 1222020
Date: 2020-12-22
Applicant(s): UNIVERSITAT LINZ

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Application/Publication number: 20 21060483
Date: 2021-12-22
Applicant(s): UNIVERSITAT LINZ

Searching for OpenAIRE data...

There was an error trying to search data from OpenAIRE

No results available