Laser-induced hierarchical micro-/nano-structures for controlled cell adhesion at implants

Información del proyecto

LaserImplant

Identificador del acuerdo de subvención: 951730

DOI

10.3030/951730

Proyecto cerrado

Fecha de la firma de la CE 17 Junio 2020

Fecha de inicio 1 Enero 2021

Fecha de finalización 31 Marzo 2023

Financiado con arreglo a

• EXCELLENT SCIENCE - Future and Emerging Technologies (FET)

Coste total

€ 1 945 797,50

Aportación de la UE

€ 1 945 797,50

Coordinado por

UNIVERSITAT LINZ
Austria

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (2)

Electrochemistry new findings

This deliverable is a public report on the website on new findings about on electrochemistry of anodized and additionally ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Mesenchymal stem cells new findings

This deliverable is a public report on the website on new findings about on the differentiation of mesenchymal stem cells induced by ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Other (4)

Images of osteoblasts on bone screws

Collection of SEM images of osteoblasts on bone screws with hierarchical spikes and ripples on the website

Images of osteoblasts on screws of dental implants

Collection of SEM images of osteoblasts on screws of dental implants with hierarchical spikes and ripples on the website

Images designed LIPSS patterns

Collection of SEM images of designed LIPSS patterns on cylindrical Tibased samples published on the website

Images hierarchical spikes and ripples

Collection of SEM images of hierarchical spikes and ripples on cylindrical Tibased samples published on the LaserImplant website

Websites, patent fillings, videos etc. (1)

Web-site

To disseminate relevant uptodate information regarding the project a website will be set up with public and internal section

Publicaciones

Peer reviewed articles (17)

Dual-functionalized titanium by ultrafast laser texturing to enhance human gingival fibroblasts adhesion and minimize Porphyromonas gingivalis colonization

Autores: Papa, S., Abou Khalil, A., Hamzeh-Cognasse H., Thomas, M.; Maalouf, M., Di Maio, Y., Sedao, X., Guignandon, A., and Dumas, V
Publicado en: Applied Surface Science, Edición 606, 2022, Página(s) 154784, ISSN 0169-4332
Editor: Elsevier BV
DOI: 10.1016/j.apsusc.2022.154784

Ten Open Questions about Laser-Induced Periodic Surface Structures

Autores: Jörn Bonse, Stephan Gräf
Publicado en: Nanomaterials, Edición 11, 2021, Página(s) 3326, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano11123326

Corrosion Study of Picosecond‐Laser Structured and Anodized Ti6Al4V for Bone Screws

Autores: Dominik Knapic, Andrei Ionut Mardare, Heike Voss, Jörn Bonse, Achim Walter Hassel
Publicado en: physica status solidi (a), Edición 221, 2024, ISSN 1862-6300
Editor: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.202300609

Femtosecond Laser-Processing of Pre-Anodized Ti-Based Bone Implants for Cell-Repellent Functionalization

Autores: Martina Muck, Benedikt Wolfsjäger, Karoline Seibert, Christian Maier, Shaukat Ali Lone, Achim Walter Hassel, Werner Baumgartner, Johannes Heitz
Publicado en: Nanomaterials, Edición 11/5, 2021, Página(s) 1342, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano11051342

Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses

Autores: Luis Porta-Velilla, Neslihan Turan, Álvaro Cubero, Wei Shao, Hongtao Li, Germán F. de la Fuente, Elena Martínez, Ángel Larrea, Miguel Castro, Haluk Koralay, Şükrü Çavdar, Jörn Bonse, Luis A. Angurel
Publicado en: Nanomaterials, Edición 12, 2022, Página(s) 2380, ISSN 2079-4991
Editor: MDPI
DOI: 10.3390/nano12142380

Quo Vadis LIPSS?—Recent and Future Trends on Laser-Induced Periodic Surface Structures

Autores: Jörn Bonse
Publicado en: Nanomaterials, Edición 10/10, 2020, Página(s) 1950, ISSN 2079-4991
Editor: MDPI Open Access Publishing
DOI: 10.3390/nano10101950

Guidance of Osteoblast Migration Using Femtosecond Laser-Induced Hierarchical Structures.

Autores: Heitz, J.; Glachs, S.;Wagner, L.;Wolf, C.; Plamadeala, C.; Muck, M.; Seibert, K.; Maier, C.; Marek, R.;Weth, A.; Baugartner, W.
Publicado en: Coatings, Edición 15, 2025, Página(s) 127, ISSN 2079-6412
Editor: MPDI
DOI: 10.3390/coatings15020127

Key topographic parameters driving surface adhesion of Porphyromonas gingivalis

Autores: Steve Papa; Mathieu Maalouf; Pierre Claudel; Xxx Sedao; Yoan Di Maio; Hind Hamzeh-Cognasse; Mireille Thomas; Alain Guignandon; Virginie Dumas
Publicado en: Scientific Reports, Edición 13, 2023, Página(s) 15893, ISSN 2045-2322
Editor: Nature Publishing Group
DOI: 10.1038/s41598-023-42387-5

Influence of multi-wavelength ultrafast laser texturing and autoclave sterilization on titanium alloy-based surface wettability

Autores: Pallarés-Aldeiturriaga, D., Papa, S., Abou Khalil, A. Pascale-Hamri, A., Maalouf, M., Di Maio, Y., Guignandon, A., Dumas, V., and Sedao, X
Publicado en: Appl. Phys. A, Edición 128, 2022, Página(s) 894, ISSN 1432-0630
Editor: Springer
DOI: 10.1007/s00339-022-06015-9

Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon

Autores: Camilo Florian, Daniel Fischer, Katharina Freiberg, Matthias Duwe, Mario Sahre, Stefan Schneider, Andreas Hertwig, Jörg Krüger, Markus Rettenmayr, Uwe Beck, Andreas Undisz, Jörn Bonse
Publicado en: Materials, Edición 14/7, 2021, Página(s) 1651, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma14071651

Laser Treatment of Dental Implants toward an Optimized Osseointegration: Evaluation via Tapping-Mode Atomic Force Microscopy and Scanning Electron Microscopy

Autores: Wiktor Luczak, Ciril Reiner-Rozman, Martina Muck, Johannes Heitz, Gergo Mitov, Florian Pfaffeneder, Constantin von See, Achim Walter Hassel, and Christoph Kleber
Publicado en: Physica status solidi A, Edición 2023, 2023, Página(s) 2200605, ISSN 1862-6300
Editor: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.202200605

Chemical and Topographical Changes upon Sub‐100‐nm Laser‐Induced Periodic Surface Structure Formation on Titanium Alloy: The Influence of Laser Pulse Repetition Rate and Number of Over‐Scans

Autores: Kai Müller, Francesca Mirabella, Xenia Knigge, Marek Mezera, Matthias Weise, Mario Sahre, Karsten Wasmuth, Heike Voss, Andreas Hertwig, Jörg Krüger, Jörg Radnik, Vasile-Dan Hodoroaba, Jörn Bonse
Publicado en: physica status solidi (a), Edición 221, 2024, ISSN 1862-6300
Editor: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.202300719

Polarization of Femtosecond Laser for Titanium Alloy Nanopatterning Influences Osteoblastic Differentiation

Autores: Maalouf, M., Abou Khalil, Alain., Di Maio, Y., Papa, S., Sedao, X., Dalix, E., Peyroche, S., Guignandon, A., Dumas, V.
Publicado en: Nanomaterials, Edición 12, 2022, Página(s) 1619, ISSN 2079-4991
Editor: MPDI
DOI: 10.3390/nano12101619

A Novel Screw Drive for Allogenic Headless Position Screws for Use in Osteosynthesis—A Finite-Element Analysis

Autores: Sebastian Lifka, Werner Baumgartner
Publicado en: Bioengineering, Edición 8/10, 2021, Página(s) 136, ISSN 2306-5354
Editor: MDPI
DOI: 10.3390/bioengineering8100136

Numerical study of the wetting dynamics of droplet on laser textured surfaces: Beyond classical Wenzel and Cassie-Baxter model

Autores: Omeje. I. O., Itina, T. E.
Publicado en: Applied Surface Science Advances, Edición 9, 2022, Página(s) 100250, ISSN 2666-5239
Editor: Elsevier
DOI: 10.1016/j.apsadv.2022.100250

Electrochemical and surface characterization of anodized and fs-laser treated Ti6Al4V for osseo-repellent bone screws and dental implants

Autores: D. Knapic, M. Muck, J. Heitz, W. Baumgartner, A.I. Mardare, C. Kleber, A.W. Hassel
Publicado en: Electrochimica Acta, Edición 466, 2023, Página(s) 142965, ISSN 0013-4686
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2023.142965

The Development and Biomechanical Analysis of an Allograft Interference Screw for Anterior Cruciate Ligament Reconstruction

Autores: Sebastian Lifka, Yannik Rehberger, Klaus Pastl, Alexander Rofner-Moretti, Markus Reichkendler, Werner Baumgartner
Publicado en: Bioengineering, Edición 10, 2023, Página(s) 1174, ISSN 2306-5354
Editor: MPDI
DOI: 10.3390/bioengineering10101174

Other (1)

EditorialNanopatterning of Bionic Materials

Autores: Johannes Heitz
Publicado en: Nanomaterials, Edición 13, 2023, Página(s) 233, ISBN 9780128224014
Editor: MDPI
DOI: 10.3390/nano13020233

Book chapters (2)

Creation of Material Functions by Nanostructuring

Autores: Marek Mezera; Camilo Florian; Gert-willem Römer; Jörg Krüger; Jörn Bonse
Publicado en: Springer Series in Optical Sciences, Edición 239, 2023, ISBN 978-3-031-14751-7
Editor: Springer Nature
DOI: 10.1007/978-3-031-14752-4_23

Laser Structuring for Biomedical Applications

Autores: Gerda Buchberger, Martina Muck, Cristina Plamadeala, Johannes Heitz
Publicado en: Springer Series in Optical Sciences, Edición 239, 2023, Página(s) 1105 -1165, ISSN 0342-4111
Editor: Springer
DOI: 10.1007/978-3-031-14752-4_31

Derechos de propiedad intelectual

Patent (4)

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Número de solicitud/publicación: 51 1222020
Fecha: 2020-12-22
Solicitante(s): UNIVERSITAT LINZ

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Número de solicitud/publicación: 20 21060483
Fecha: 2021-12-22
Solicitante(s): HOFER GMBH & CO KG

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Número de solicitud/publicación: 20 21060483
Fecha: 2021-12-22
Solicitante(s): UNIVERSITAT LINZ

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Número de solicitud/publicación: 51 1222020
Fecha: 2020-12-22
Solicitante(s): HOFER GMBH & CO KG