CORDIS - Forschungsergebnisse der EU
CORDIS

Laser-induced hierarchical micro-/nano-structures for controlled cell adhesion at implants

Leistungen

Electrochemistry new findings

This deliverable is a public report on the website on new findings about on electrochemistry of anodized and additionally ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Mesenchymal stem cells new findings

This deliverable is a public report on the website on new findings about on the differentiation of mesenchymal stem cells induced by ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Images of osteoblasts on bone screws

Collection of SEM images of osteoblasts on bone screws with hierarchical spikes and ripples on the website

Images of osteoblasts on screws of dental implants

Collection of SEM images of osteoblasts on screws of dental implants with hierarchical spikes and ripples on the website

Images designed LIPSS patterns

Collection of SEM images of designed LIPSS patterns on cylindrical Tibased samples published on the website

Images hierarchical spikes and ripples

Collection of SEM images of hierarchical spikes and ripples on cylindrical Tibased samples published on the LaserImplant website

Web-site

To disseminate relevant uptodate information regarding the project a website will be set up with public and internal section

Veröffentlichungen

Dual-functionalized titanium by ultrafast laser texturing to enhance human gingival fibroblasts adhesion and minimize Porphyromonas gingivalis colonization

Autoren: Papa, S., Abou Khalil, A., Hamzeh-Cognasse H., Thomas, M.; Maalouf, M., Di Maio, Y., Sedao, X., Guignandon, A., and Dumas, V
Veröffentlicht in: Applied Surface Science, Ausgabe 606, 2022, Seite(n) 154784, ISSN 0169-4332
Herausgeber: Elsevier BV
DOI: 10.1016/j.apsusc.2022.154784

Ten Open Questions about Laser-Induced Periodic Surface Structures

Autoren: Jörn Bonse, Stephan Gräf
Veröffentlicht in: Nanomaterials, Ausgabe 11, 2021, Seite(n) 3326, ISSN 2079-4991
Herausgeber: MDPI
DOI: 10.3390/nano11123326

Femtosecond Laser-Processing of Pre-Anodized Ti-Based Bone Implants for Cell-Repellent Functionalization

Autoren: Martina Muck, Benedikt Wolfsjäger, Karoline Seibert, Christian Maier, Shaukat Ali Lone, Achim Walter Hassel, Werner Baumgartner, Johannes Heitz
Veröffentlicht in: Nanomaterials, Ausgabe 11/5, 2021, Seite(n) 1342, ISSN 2079-4991
Herausgeber: MDPI
DOI: 10.3390/nano11051342

Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses

Autoren: Luis Porta-Velilla, Neslihan Turan, Álvaro Cubero, Wei Shao, Hongtao Li, Germán F. de la Fuente, Elena Martínez, Ángel Larrea, Miguel Castro, Haluk Koralay, Şükrü Çavdar, Jörn Bonse, Luis A. Angurel
Veröffentlicht in: Nanomaterials, Ausgabe 12, 2022, Seite(n) 2380, ISSN 2079-4991
Herausgeber: MDPI
DOI: 10.3390/nano12142380

Quo Vadis LIPSS?—Recent and Future Trends on Laser-Induced Periodic Surface Structures

Autoren: Jörn Bonse
Veröffentlicht in: Nanomaterials, Ausgabe 10/10, 2020, Seite(n) 1950, ISSN 2079-4991
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/nano10101950

Key topographic parameters driving surface adhesion of Porphyromonas gingivalis

Autoren: Steve Papa; Mathieu Maalouf; Pierre Claudel; Xxx Sedao; Yoan Di Maio; Hind Hamzeh-Cognasse; Mireille Thomas; Alain Guignandon; Virginie Dumas
Veröffentlicht in: Scientific Reports, Ausgabe 13, 2023, Seite(n) 15893, ISSN 2045-2322
Herausgeber: Nature Publishing Group
DOI: 10.1038/s41598-023-42387-5

Influence of multi-wavelength ultrafast laser texturing and autoclave sterilization on titanium alloy-based surface wettability

Autoren: Pallarés-Aldeiturriaga, D., Papa, S., Abou Khalil, A. Pascale-Hamri, A., Maalouf, M., Di Maio, Y., Guignandon, A., Dumas, V., and Sedao, X
Veröffentlicht in: Appl. Phys. A, Ausgabe 128, 2022, Seite(n) 894, ISSN 1432-0630
Herausgeber: Springer
DOI: 10.1007/s00339-022-06015-9

Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon

Autoren: Camilo Florian, Daniel Fischer, Katharina Freiberg, Matthias Duwe, Mario Sahre, Stefan Schneider, Andreas Hertwig, Jörg Krüger, Markus Rettenmayr, Uwe Beck, Andreas Undisz, Jörn Bonse
Veröffentlicht in: Materials, Ausgabe 14/7, 2021, Seite(n) 1651, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma14071651

Laser Treatment of Dental Implants toward an Optimized Osseointegration: Evaluation via Tapping-Mode Atomic Force Microscopy and Scanning Electron Microscopy

Autoren: Wiktor Luczak, Ciril Reiner-Rozman, Martina Muck, Johannes Heitz, Gergo Mitov, Florian Pfaffeneder, Constantin von See, Achim Walter Hassel, and Christoph Kleber
Veröffentlicht in: Physica status solidi A, Ausgabe 2023, 2023, Seite(n) 2200605, ISSN 1862-6300
Herausgeber: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.202200605

Polarization of Femtosecond Laser for Titanium Alloy Nanopatterning Influences Osteoblastic Differentiation

Autoren: Maalouf, M., Abou Khalil, Alain., Di Maio, Y., Papa, S., Sedao, X., Dalix, E., Peyroche, S., Guignandon, A., Dumas, V.
Veröffentlicht in: Nanomaterials, Ausgabe 12, 2022, Seite(n) 1619, ISSN 2079-4991
Herausgeber: MPDI
DOI: 10.3390/nano12101619

A Novel Screw Drive for Allogenic Headless Position Screws for Use in Osteosynthesis—A Finite-Element Analysis

Autoren: Sebastian Lifka, Werner Baumgartner
Veröffentlicht in: Bioengineering, Ausgabe 8/10, 2021, Seite(n) 136, ISSN 2306-5354
Herausgeber: MDPI
DOI: 10.3390/bioengineering8100136

Numerical study of the wetting dynamics of droplet on laser textured surfaces: Beyond classical Wenzel and Cassie-Baxter model

Autoren: Omeje. I. O., Itina, T. E.
Veröffentlicht in: Applied Surface Science Advances, Ausgabe 9, 2022, Seite(n) 100250, ISSN 2666-5239
Herausgeber: Elsevier
DOI: 10.1016/j.apsadv.2022.100250

Electrochemical and surface characterization of anodized and fs-laser treated Ti6Al4V for osseo-repellent bone screws and dental implants

Autoren: D. Knapic, M. Muck, J. Heitz, W. Baumgartner, A.I. Mardare, C. Kleber, A.W. Hassel
Veröffentlicht in: Electrochimica Acta, Ausgabe 466, 2023, Seite(n) 142965, ISSN 0013-4686
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2023.142965

The Development and Biomechanical Analysis of an Allograft Interference Screw for Anterior Cruciate Ligament Reconstruction

Autoren: Sebastian Lifka, Yannik Rehberger, Klaus Pastl, Alexander Rofner-Moretti, Markus Reichkendler, Werner Baumgartner
Veröffentlicht in: Bioengineering, Ausgabe 10, 2023, Seite(n) 1174, ISSN 2306-5354
Herausgeber: MPDI
DOI: 10.3390/bioengineering10101174

EditorialNanopatterning of Bionic Materials

Autoren: Johannes Heitz
Veröffentlicht in: Nanomaterials, Ausgabe 13, 2023, Seite(n) 233, ISBN 9780128224014
Herausgeber: MDPI
DOI: 10.3390/nano13020233

Creation of Material Functions by Nanostructuring

Autoren: Marek Mezera; Camilo Florian; Gert-willem Römer; Jörg Krüger; Jörn Bonse
Veröffentlicht in: Springer Series in Optical Sciences, Ausgabe 239, 2023, ISBN 978-3-031-14751-7
Herausgeber: Springer Nature
DOI: 10.1007/978-3-031-14752-4_23

Laser Structuring for Biomedical Applications

Autoren: Gerda Buchberger, Martina Muck, Cristina Plamadeala, Johannes Heitz
Veröffentlicht in: Springer Series in Optical Sciences, Ausgabe 239, 2023, Seite(n) 1105 -1165, ISSN 0342-4111
Herausgeber: Springer
DOI: 10.1007/978-3-031-14752-4_31

Rechte des geistigen Eigentums

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Antrags-/Publikationsnummer: 51 1222020
Datum: 2020-12-22
Antragsteller: HOFER GMBH & CO KG

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Antrags-/Publikationsnummer: 20 21060483
Datum: 2021-12-22
Antragsteller: HOFER GMBH & CO KG

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Antrags-/Publikationsnummer: 51 1222020
Datum: 2020-12-22
Antragsteller: UNIVERSITAT LINZ

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Antrags-/Publikationsnummer: 20 21060483
Datum: 2021-12-22
Antragsteller: UNIVERSITAT LINZ

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor