Laser-induced hierarchical micro-/nano-structures for controlled cell adhesion at implants

Risultati finali

This deliverable is a public report on the website on new findings about on electrochemistry of anodized and additionally ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Mesenchymal stem cells new findings

This deliverable is a public report on the website on new findings about on the differentiation of mesenchymal stem cells induced by ultrafastlaser processed Tibased surfaces It will refer to a scientific article on these results

Images of osteoblasts on bone screws

Collection of SEM images of osteoblasts on bone screws with hierarchical spikes and ripples on the website

Images of osteoblasts on screws of dental implants

Collection of SEM images of osteoblasts on screws of dental implants with hierarchical spikes and ripples on the website

Images designed LIPSS patterns

Collection of SEM images of designed LIPSS patterns on cylindrical Tibased samples published on the website

Images hierarchical spikes and ripples

Collection of SEM images of hierarchical spikes and ripples on cylindrical Tibased samples published on the LaserImplant website

Web-site

To disseminate relevant uptodate information regarding the project a website will be set up with public and internal section

Pubblicazioni

Dual-functionalized titanium by ultrafast laser texturing to enhance human gingival fibroblasts adhesion and minimize Porphyromonas gingivalis colonization

Autori: Papa, S., Abou Khalil, A., Hamzeh-Cognasse H., Thomas, M.; Maalouf, M., Di Maio, Y., Sedao, X., Guignandon, A., and Dumas, V
Pubblicato in: Applied Surface Science, Numero 606, 2022, Pagina/e 154784, ISSN 0169-4332
Editore: Elsevier BV
DOI: 10.1016/j.apsusc.2022.154784

Ten Open Questions about Laser-Induced Periodic Surface Structures

Autori: Jörn Bonse, Stephan Gräf
Pubblicato in: Nanomaterials, Numero 11, 2021, Pagina/e 3326, ISSN 2079-4991
Editore: MDPI
DOI: 10.3390/nano11123326

Femtosecond Laser-Processing of Pre-Anodized Ti-Based Bone Implants for Cell-Repellent Functionalization

Autori: Martina Muck, Benedikt Wolfsjäger, Karoline Seibert, Christian Maier, Shaukat Ali Lone, Achim Walter Hassel, Werner Baumgartner, Johannes Heitz
Pubblicato in: Nanomaterials, Numero 11/5, 2021, Pagina/e 1342, ISSN 2079-4991
Editore: MDPI
DOI: 10.3390/nano11051342

Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses

Autori: Luis Porta-Velilla, Neslihan Turan, Álvaro Cubero, Wei Shao, Hongtao Li, Germán F. de la Fuente, Elena Martínez, Ángel Larrea, Miguel Castro, Haluk Koralay, Şükrü Çavdar, Jörn Bonse, Luis A. Angurel
Pubblicato in: Nanomaterials, Numero 12, 2022, Pagina/e 2380, ISSN 2079-4991
Editore: MDPI
DOI: 10.3390/nano12142380

Quo Vadis LIPSS?—Recent and Future Trends on Laser-Induced Periodic Surface Structures

Autori: Jörn Bonse
Pubblicato in: Nanomaterials, Numero 10/10, 2020, Pagina/e 1950, ISSN 2079-4991
Editore: MDPI Open Access Publishing
DOI: 10.3390/nano10101950

Key topographic parameters driving surface adhesion of Porphyromonas gingivalis

Autori: Steve Papa; Mathieu Maalouf; Pierre Claudel; Xxx Sedao; Yoan Di Maio; Hind Hamzeh-Cognasse; Mireille Thomas; Alain Guignandon; Virginie Dumas
Pubblicato in: Scientific Reports, Numero 13, 2023, Pagina/e 15893, ISSN 2045-2322
Editore: Nature Publishing Group
DOI: 10.1038/s41598-023-42387-5

Influence of multi-wavelength ultrafast laser texturing and autoclave sterilization on titanium alloy-based surface wettability

Autori: Pallarés-Aldeiturriaga, D., Papa, S., Abou Khalil, A. Pascale-Hamri, A., Maalouf, M., Di Maio, Y., Guignandon, A., Dumas, V., and Sedao, X
Pubblicato in: Appl. Phys. A, Numero 128, 2022, Pagina/e 894, ISSN 1432-0630
Editore: Springer
DOI: 10.1007/s00339-022-06015-9

Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon

Autori: Camilo Florian, Daniel Fischer, Katharina Freiberg, Matthias Duwe, Mario Sahre, Stefan Schneider, Andreas Hertwig, Jörg Krüger, Markus Rettenmayr, Uwe Beck, Andreas Undisz, Jörn Bonse
Pubblicato in: Materials, Numero 14/7, 2021, Pagina/e 1651, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma14071651

Laser Treatment of Dental Implants toward an Optimized Osseointegration: Evaluation via Tapping-Mode Atomic Force Microscopy and Scanning Electron Microscopy

Autori: Wiktor Luczak, Ciril Reiner-Rozman, Martina Muck, Johannes Heitz, Gergo Mitov, Florian Pfaffeneder, Constantin von See, Achim Walter Hassel, and Christoph Kleber
Pubblicato in: Physica status solidi A, Numero 2023, 2023, Pagina/e 2200605, ISSN 1862-6300
Editore: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/pssa.202200605

Polarization of Femtosecond Laser for Titanium Alloy Nanopatterning Influences Osteoblastic Differentiation

Autori: Maalouf, M., Abou Khalil, Alain., Di Maio, Y., Papa, S., Sedao, X., Dalix, E., Peyroche, S., Guignandon, A., Dumas, V.
Pubblicato in: Nanomaterials, Numero 12, 2022, Pagina/e 1619, ISSN 2079-4991
Editore: MPDI
DOI: 10.3390/nano12101619

A Novel Screw Drive for Allogenic Headless Position Screws for Use in Osteosynthesis—A Finite-Element Analysis

Autori: Sebastian Lifka, Werner Baumgartner
Pubblicato in: Bioengineering, Numero 8/10, 2021, Pagina/e 136, ISSN 2306-5354
Editore: MDPI
DOI: 10.3390/bioengineering8100136

Numerical study of the wetting dynamics of droplet on laser textured surfaces: Beyond classical Wenzel and Cassie-Baxter model

Autori: Omeje. I. O., Itina, T. E.
Pubblicato in: Applied Surface Science Advances, Numero 9, 2022, Pagina/e 100250, ISSN 2666-5239
Editore: Elsevier
DOI: 10.1016/j.apsadv.2022.100250

Electrochemical and surface characterization of anodized and fs-laser treated Ti6Al4V for osseo-repellent bone screws and dental implants

Autori: D. Knapic, M. Muck, J. Heitz, W. Baumgartner, A.I. Mardare, C. Kleber, A.W. Hassel
Pubblicato in: Electrochimica Acta, Numero 466, 2023, Pagina/e 142965, ISSN 0013-4686
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.electacta.2023.142965

The Development and Biomechanical Analysis of an Allograft Interference Screw for Anterior Cruciate Ligament Reconstruction

Autori: Sebastian Lifka, Yannik Rehberger, Klaus Pastl, Alexander Rofner-Moretti, Markus Reichkendler, Werner Baumgartner
Pubblicato in: Bioengineering, Numero 10, 2023, Pagina/e 1174, ISSN 2306-5354
Editore: MPDI
DOI: 10.3390/bioengineering10101174

EditorialNanopatterning of Bionic Materials

Autori: Johannes Heitz
Pubblicato in: Nanomaterials, Numero 13, 2023, Pagina/e 233, ISBN 9780128224014
Editore: MDPI
DOI: 10.3390/nano13020233

Creation of Material Functions by Nanostructuring

Autori: Marek Mezera; Camilo Florian; Gert-willem Römer; Jörg Krüger; Jörn Bonse
Pubblicato in: Springer Series in Optical Sciences, Numero 239, 2023, ISBN 978-3-031-14751-7
Editore: Springer Nature
DOI: 10.1007/978-3-031-14752-4_23

Laser Structuring for Biomedical Applications

Autori: Gerda Buchberger, Martina Muck, Cristina Plamadeala, Johannes Heitz
Pubblicato in: Springer Series in Optical Sciences, Numero 239, 2023, Pagina/e 1105 -1165, ISSN 0342-4111
Editore: Springer
DOI: 10.1007/978-3-031-14752-4_31

Diritti di proprietà intellettuale

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Numero candidatura/pubblicazione: 51 1222020
Data: 2020-12-22
Candidato/i: HOFER GMBH & CO KG

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Numero candidatura/pubblicazione: 20 21060483
Data: 2021-12-22
Candidato/i: HOFER GMBH & CO KG

Verfahren zur Herstellung eines oberflächenmodifizierten Metallimplantats

Numero candidatura/pubblicazione: 51 1222020
Data: 2020-12-22
Candidato/i: UNIVERSITAT LINZ

METHOD FOR PRODUCING A SURFACE-MODIFIED METAL IMPLANT

Numero candidatura/pubblicazione: 20 21060483
Data: 2021-12-22
Candidato/i: UNIVERSITAT LINZ

Risultati finali

Pubblicazioni

Diritti di proprietà intellettuale

Condividi questa pagina

Scarica