Descrizione del progetto
Sostenere la facoltà di tecnologia e metallurgia dell’Università di Belgrado
Presso l’Università di Belgrado si svolgeranno attività quali missioni di scambio di personale a breve termine, workshop e scuole estive, al fine di migliorare la capacità di ricerca e innovazione della facoltà di tecnologia e metallurgia di tale ateneo. Gli eventi organizzati dal progetto ExcellMater, finanziato dall’UE, verteranno sull’ingegneria dei biomateriali e daranno vita a collaborazioni con alcuni dei più importanti istituti internazionali: l’Università di Aalto, in Finlandia, l’Università del Piemonte Orientale, in Italia e l’Istituto di ricerca AO di Davos, in Svizzera. Uno dei principali obiettivi del progetto è affrontare la questione del divario traslazionale nello sviluppo e nell’impiego di nuovi biomateriali per dispositivi medici, derivante dalla mancanza di procedure e competenze in materia. In corrispondenza delle fasi finali del progetto, che avrà durata di tre anni, si terrà una conferenza internazionale dedicata ai biomateriali e ai dispositivi medici per aumentare la visibilità della facoltà di tecnologia e metallurgia sia in Serbia che all’estero.
Obiettivo
The aim of the ExcellMater project is to advance the research and innovation capacity of the Faculty of Technology and Metallurgy, University of Belgrade (FTM) in the area of biomaterials engineering by efficient knowledge and skills twinning activities and by creation of a sustainable collaborative network with leading international institutions: Aalto University, Finland, Università del Piemonte Orientale, Italy, and AO Research Institute Davos, Switzerland. The project addresses a translational gap in development and utilization of novel biomaterials in medical devices, arising from the lack of relevant procedures and expertise at FTM regarding biological and clinical evaluation of biomaterials, regulatory issues and IPR exploitation strategies.
The twinning activities will include short-term staff exchange missions, site expert visits, workshops, summers schools, specialized seminars with dedicated actions towards early stage researchers as well as trainings of FTM staff in project proposal writing and project management. The actions also involve the local partners in the areas of medical and life sciences, innovation and technology transfer organizations and industry to build a functional ecosystem around FTM for successful translation of scientific results from bench-to-bedside.
This will assist in overarching the gap by increasing the S&T capacity of FTM and its staff research profile.
Efficient dissemination and communication actions will be complemented with an international conference on biomaterials and medical devices as the final project event to increase the FTM national and international visibility, attract major biomedical stakeholders and raise the biomedical awareness of the society at large. The project will ultimately impact on establishment of successful translation of novel solutions to personalized medical devices contributing to foundation of a high-tech biomedical sector in Serbia.
Parole chiave
Programma(i)
- H2020-EU.4.b. - Twinning of research institutions Main Programme
Argomento(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-WIDESPREAD-2020-5
Meccanismo di finanziamento
CSA - Coordination and support actionCoordinatore
11120 Belgrade
Serbia