Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

FABRICATION OF SENSOR PACKAGES ENABLED BY ADDITIVE MANUFACTURING

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Pilot line with inkjet system installed at BOS (s’ouvre dans une nouvelle fenêtre)

Inkjet hardware and software based on definitions of D2.5 and concept from D5.2, including updates on existing equipment at PRO, printer pilot by NOT and Laser tools by FOR.

Prototype of Placement equipment (s’ouvre dans une nouvelle fenêtre)

Placement hardware and software based on definitions of D23 and D26 including pick and place gripper setup AI software to improve accuracy 3D inspection systems by SEN and BESI laser ellipsometry by SEN and interface to TINKER platform interoperability

Demonstrator of RADAR sensor package fabricated using TINKER platform (s’ouvre dans une nouvelle fenêtre)

Small series fabrication of RADAR sensor package demonstrator fabrication via TINKER pilot platform,

Prototype of TINKER platform including closed loop error compensation (s’ouvre dans une nouvelle fenêtre)

Functional prototype of TINKER pilot, deriving from prototypes for placement (D3.1, 4.1 and 5.1 and 5.4). Closed loop error compensation between devices. Interoperability established between the single TINKER pilot parts.

Prototype of NIL resist with high refractive index (s’ouvre dans une nouvelle fenêtre)

High refractive index material prototype for OPA application based on the definitions in D22 and D25

Prototypes of TINKER inkjet materials (s’ouvre dans une nouvelle fenêtre)

Prototypes of Electrically conductive copper ink by PVN Dielectric inks based on BMI material by PVN and based on acrylic material by TIG and thermal conductive ink by TIG Based on the definitions in D21 and D25

Prototype NIL equipment and tools (s’ouvre dans une nouvelle fenêtre)

NIL hardware and process setup based on D25 to serve the manufacturing of OPA devices

Prototype LIDAR sensor assembly (s’ouvre dans une nouvelle fenêtre)

PIC – EIC assembly prototypes via TINKER fabrication approaches

Prototype of inspection equipment (s’ouvre dans une nouvelle fenêtre)

Related to task 41 first set of inspection system equipment hard and software and inspection tools based on thermography spectroscopy and microscopy approaches allowing first collection of raw data of TINKER processes

Prototype RADAR sensor assembly (s’ouvre dans une nouvelle fenêtre)

Fabricated RADAR prototypes via TINKER fabrication approaches

Demonstrator of LIDAR sensor package fabricated using TINKER platform (s’ouvre dans une nouvelle fenêtre)

Small series fabrication of LIDAR sensor package demonstrator fabrication via TINKER pilot platform.Conception and realization of a driving electronic board and electric testsFPGA and computer software development

Data set in repository (s’ouvre dans une nouvelle fenêtre)

Subset of data and meta data collected for publication in a public repository in accordance to data management plan (DMP)

Publications

Autonomes Fahren: Profactor prescht vor

Auteurs: Leo Schranzhofer
Publié dans: Volksblatt, 2021
Éditeur: Oberösterreichische Media Data Vertriebs- und Verlags GmbH

Marelli, CEA-LETI in Tinker Project: See it at DVN Lidar Conference

Auteurs: Thierry Mourier
Publié dans: DVN Lidar Conference Newsletter 2022, 2022
Éditeur: Driving Vision News

Sensor packages for autonomous cars enabled by additive manufacturing

Auteurs: Martina Chopart, MSc. – Amires s.r.o.; Dr Leo Schranzhofer – Profactor GmbH; Bernhard Polzinger – Robert Bosch GmbH; Emmanuel I. Stratakis PhD. – FORTH (Foundation for Research and Technolo gy - Hellas); Dr Maria Pervolaraki – FORTH (Foundation for Research and Technology - Hellas); Dr David Volk – Notion Systems
Publié dans: OPE Journal, Numéro 38, 2022
Éditeur: Deutscher Fachverlag GmbH

Versatile use of LiDAR modules into Smart Corner and grille

Auteurs: Frederic Chave
Publié dans: DVN Lidar Conference Newsletter, 2021
Éditeur: Driving Vision News

3D Lidar-on-chip

Auteurs: Martina Chopart, Pavel Kulha
Publié dans: PRO Flextronics, Numéro 1, 2024, Page(s) 11
Éditeur: M2N Media GmbH

Shrinking RADAR and LiDAR sensor packages – an introduction to TINKER

Auteurs: Leo Schranzhofer
Publié dans: Chip Scale Review, Numéro Vol. 26, Nr. 1., 2022, Page(s) 11-12
Éditeur: Chip Scale Review

TINKER inkjet pilot line celebrates completion

Auteurs: Martina Chopart, Pavel Kulha
Publié dans: OPE journal, Numéro 45, 2023, Page(s) 18
Éditeur: Deutscher Fachverlag GmbH

AugenundOhren für selbstfahrende Autos aus Steyr

Auteurs: HANNES FEHRINGER
Publié dans: Steyrer Zeitung, 2021
Éditeur: OÖ. Online GmbH & Co.KG.

Autonomfahren: Oberösterreich steigtt gtaufs Gas

Auteurs: Ulrike Rubasch
Publié dans: OÖ Nachrichten, 2021
Éditeur: OÖ Nachrichten

UV Nanoimprint Lithography—Impact of Coating Techniques on Pattern Quality (s’ouvre dans une nouvelle fenêtre)

Auteurs: Johanna Rimböck, Patrick Schuster, Lisa Vsetecka, Christine Thanner
Publié dans: Nanomanufacturing, Numéro 4, 2024, Page(s) 69-80, ISSN 2673-687X
Éditeur: MDPI
DOI: 10.3390/nanomanufacturing4010005

Deep learning for zero-defect inkjet-printing of electronics (s’ouvre dans une nouvelle fenêtre)

Auteurs: Flaig Minnette, Zambal Sebastian
Publié dans: 2021 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT), 2022, Page(s) 458-463
Éditeur: IEEE
DOI: 10.1109/metroind4.0iot51437.2021.9488493

Direct patterning of functional materials using nanoimprint lithography (s’ouvre dans une nouvelle fenêtre)

Auteurs: Michael J. Haslinger, Sonja Kopp, Voktorija Jonaityte, Amiya Moharana, Helene Außerhuber, Michael Mühlberger
Publié dans: 38th European Mask and Lithography Conference (EMLC 2023), 2023
Éditeur: SPIE
DOI: 10.1117/12.2674052

Error Compensation of Inkjet-printed Electronics using Incremental Learning and Knowledge Distillation (s’ouvre dans une nouvelle fenêtre)

Auteurs: Abdalla Shahin
Publié dans: 2024 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), 2024
Éditeur: IEEE
DOI: 10.1109/acdsa59508.2024.10467896

Feedback Error Compensation of Inkjet-Printed ElectronicsUsing Incremental Learning and Knowledge DistillationMethods

Auteurs: Abdalla Saber Ali Shahin
Publié dans: 2023
Éditeur: Alpen-Adria-Universität Klagenfurt

Droits de propriété intellectuelle

MEASURING DEVICE BASED ON A COMBINATION OF OPTICAL 2D AND 3D IMAGE CAPTURING METHODS

Numéro de demande/publication: 20 23053349
Date: 2023-04-03
Demandeur(s): BESI AUSTRIA GMBH

Messvorrichtung basierend auf kombinierter optischer 2D- und 3D-Bilderfassungsverfahren, Fertigungssystem und Inspektionssystem

Numéro de demande/publication: 10 2022107897
Date: 2022-04-01
Demandeur(s): BESI AUSTRIA GMBH

Recherche de données OpenAIRE...

Une erreur s’est produite lors de la recherche de données OpenAIRE

Aucun résultat disponible

Mon livret 0 0