FABRICATION OF SENSOR PACKAGES ENABLED BY ADDITIVE MANUFACTURING

Informazioni relative al progetto

TINKER

ID dell’accordo di sovvenzione: 958472

DOI

10.3030/958472

Progetto chiuso

Data della firma CE 23 Settembre 2020

Data di avvio 1 Ottobre 2020

Data di completamento 31 Marzo 2024

Finanziato da

• INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing

Costo totale

€ 10 241 526,25

Contributo UE

€ 10 241 526,25

Coordinato da

PROFACTOR GMBH
Austria

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Demonstrators, pilots, prototypes (11)

Pilot line with inkjet system installed at BOS

Inkjet hardware and software based on definitions of D2.5 and concept from D5.2, including updates on existing equipment at PRO, printer pilot by NOT and Laser tools by FOR.

Prototype of Placement equipment

Placement hardware and software based on definitions of D23 and D26 including pick and place gripper setup AI software to improve accuracy 3D inspection systems by SEN and BESI laser ellipsometry by SEN and interface to TINKER platform interoperability

Demonstrator of RADAR sensor package fabricated using TINKER platform

Small series fabrication of RADAR sensor package demonstrator fabrication via TINKER pilot platform,

Prototype of TINKER platform including closed loop error compensation

Functional prototype of TINKER pilot, deriving from prototypes for placement (D3.1, 4.1 and 5.1 and 5.4). Closed loop error compensation between devices. Interoperability established between the single TINKER pilot parts.

Prototype of NIL resist with high refractive index

High refractive index material prototype for OPA application based on the definitions in D22 and D25

Prototypes of TINKER inkjet materials

Prototypes of Electrically conductive copper ink by PVN Dielectric inks based on BMI material by PVN and based on acrylic material by TIG and thermal conductive ink by TIG Based on the definitions in D21 and D25

Prototype NIL equipment and tools

NIL hardware and process setup based on D25 to serve the manufacturing of OPA devices

Prototype LIDAR sensor assembly

PIC – EIC assembly prototypes via TINKER fabrication approaches

Prototype of inspection equipment

Related to task 41 first set of inspection system equipment hard and software and inspection tools based on thermography spectroscopy and microscopy approaches allowing first collection of raw data of TINKER processes

Prototype RADAR sensor assembly

Fabricated RADAR prototypes via TINKER fabrication approaches

Demonstrator of LIDAR sensor package fabricated using TINKER platform

Small series fabrication of LIDAR sensor package demonstrator fabrication via TINKER pilot platform.Conception and realization of a driving electronic board and electric testsFPGA and computer software development

Websites, patent fillings, videos etc. (1)

Data set in repository

Subset of data and meta data collected for publication in a public repository in accordance to data management plan (DMP)

Pubblicazioni

Other (9)

Autonomes Fahren: Profactor prescht vor

Autori: Leo Schranzhofer
Pubblicato in: Volksblatt, 2021
Editore: Oberösterreichische Media Data Vertriebs- und Verlags GmbH

Marelli, CEA-LETI in Tinker Project: See it at DVN Lidar Conference

Autori: Thierry Mourier
Pubblicato in: DVN Lidar Conference Newsletter 2022, 2022
Editore: Driving Vision News

Sensor packages for autonomous cars enabled by additive manufacturing

Autori: Martina Chopart, MSc. – Amires s.r.o.; Dr Leo Schranzhofer – Profactor GmbH; Bernhard Polzinger – Robert Bosch GmbH; Emmanuel I. Stratakis PhD. – FORTH (Foundation for Research and Technolo gy - Hellas); Dr Maria Pervolaraki – FORTH (Foundation for Research and Technology - Hellas); Dr David Volk – Notion Systems
Pubblicato in: OPE Journal, Numero 38, 2022
Editore: Deutscher Fachverlag GmbH

Versatile use of LiDAR modules into Smart Corner and grille

Autori: Frederic Chave
Pubblicato in: DVN Lidar Conference Newsletter, 2021
Editore: Driving Vision News

3D Lidar-on-chip

Autori: Martina Chopart, Pavel Kulha
Pubblicato in: PRO Flextronics, Numero 1, 2024, Pagina/e 11
Editore: M2N Media GmbH

Shrinking RADAR and LiDAR sensor packages – an introduction to TINKER

Autori: Leo Schranzhofer
Pubblicato in: Chip Scale Review, Numero Vol. 26, Nr. 1., 2022, Pagina/e 11-12
Editore: Chip Scale Review

TINKER inkjet pilot line celebrates completion

Autori: Martina Chopart, Pavel Kulha
Pubblicato in: OPE journal, Numero 45, 2023, Pagina/e 18
Editore: Deutscher Fachverlag GmbH

AugenundOhren für selbstfahrende Autos aus Steyr

Autori: HANNES FEHRINGER
Pubblicato in: Steyrer Zeitung, 2021
Editore: OÖ. Online GmbH & Co.KG.

Autonomfahren: Oberösterreich steigtt gtaufs Gas

Autori: Ulrike Rubasch
Pubblicato in: OÖ Nachrichten, 2021
Editore: OÖ Nachrichten

Peer reviewed articles (1)

UV Nanoimprint Lithography—Impact of Coating Techniques on Pattern Quality

Autori: Johanna Rimböck, Patrick Schuster, Lisa Vsetecka, Christine Thanner
Pubblicato in: Nanomanufacturing, Numero 4, 2024, Pagina/e 69-80, ISSN 2673-687X
Editore: MDPI
DOI: 10.3390/nanomanufacturing4010005

Conference proceedings (3)

Deep learning for zero-defect inkjet-printing of electronics

Autori: Flaig Minnette, Zambal Sebastian
Pubblicato in: 2021 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT), 2022, Pagina/e 458-463
Editore: IEEE
DOI: 10.1109/metroind4.0iot51437.2021.9488493

Direct patterning of functional materials using nanoimprint lithography

Autori: Michael J. Haslinger, Sonja Kopp, Voktorija Jonaityte, Amiya Moharana, Helene Außerhuber, Michael Mühlberger
Pubblicato in: 38th European Mask and Lithography Conference (EMLC 2023), 2023
Editore: SPIE
DOI: 10.1117/12.2674052

Error Compensation of Inkjet-printed Electronics using Incremental Learning and Knowledge Distillation

Autori: Abdalla Shahin
Pubblicato in: 2024 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), 2024
Editore: IEEE
DOI: 10.1109/acdsa59508.2024.10467896

Thesis and dissertations (1)

Feedback Error Compensation of Inkjet-Printed ElectronicsUsing Incremental Learning and Knowledge DistillationMethods

Autori: Abdalla Saber Ali Shahin
Pubblicato in: 2023
Editore: Alpen-Adria-Universität Klagenfurt

Diritti di proprietà intellettuale

Patent (2)

MEASURING DEVICE BASED ON A COMBINATION OF OPTICAL 2D AND 3D IMAGE CAPTURING METHODS

Numero candidatura/pubblicazione: 20 23053349
Data: 2023-04-03
Candidato/i: BESI AUSTRIA GMBH

Messvorrichtung basierend auf kombinierter optischer 2D- und 3D-Bilderfassungsverfahren, Fertigungssystem und Inspektionssystem

Numero candidatura/pubblicazione: 10 2022107897
Data: 2022-04-01
Candidato/i: BESI AUSTRIA GMBH