Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS

FABRICATION OF SENSOR PACKAGES ENABLED BY ADDITIVE MANUFACTURING

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Pilot line with inkjet system installed at BOS (öffnet in neuem Fenster)

Inkjet hardware and software based on definitions of D2.5 and concept from D5.2, including updates on existing equipment at PRO, printer pilot by NOT and Laser tools by FOR.

Prototype of Placement equipment (öffnet in neuem Fenster)

Placement hardware and software based on definitions of D23 and D26 including pick and place gripper setup AI software to improve accuracy 3D inspection systems by SEN and BESI laser ellipsometry by SEN and interface to TINKER platform interoperability

Demonstrator of RADAR sensor package fabricated using TINKER platform (öffnet in neuem Fenster)

Small series fabrication of RADAR sensor package demonstrator fabrication via TINKER pilot platform,

Prototype of TINKER platform including closed loop error compensation (öffnet in neuem Fenster)

Functional prototype of TINKER pilot, deriving from prototypes for placement (D3.1, 4.1 and 5.1 and 5.4). Closed loop error compensation between devices. Interoperability established between the single TINKER pilot parts.

Prototype of NIL resist with high refractive index (öffnet in neuem Fenster)

High refractive index material prototype for OPA application based on the definitions in D22 and D25

Prototypes of TINKER inkjet materials (öffnet in neuem Fenster)

Prototypes of Electrically conductive copper ink by PVN Dielectric inks based on BMI material by PVN and based on acrylic material by TIG and thermal conductive ink by TIG Based on the definitions in D21 and D25

Prototype NIL equipment and tools (öffnet in neuem Fenster)

NIL hardware and process setup based on D25 to serve the manufacturing of OPA devices

Prototype LIDAR sensor assembly (öffnet in neuem Fenster)

PIC – EIC assembly prototypes via TINKER fabrication approaches

Prototype of inspection equipment (öffnet in neuem Fenster)

Related to task 41 first set of inspection system equipment hard and software and inspection tools based on thermography spectroscopy and microscopy approaches allowing first collection of raw data of TINKER processes

Prototype RADAR sensor assembly (öffnet in neuem Fenster)

Fabricated RADAR prototypes via TINKER fabrication approaches

Demonstrator of LIDAR sensor package fabricated using TINKER platform (öffnet in neuem Fenster)

Small series fabrication of LIDAR sensor package demonstrator fabrication via TINKER pilot platform.Conception and realization of a driving electronic board and electric testsFPGA and computer software development

Data set in repository (öffnet in neuem Fenster)

Subset of data and meta data collected for publication in a public repository in accordance to data management plan (DMP)

Veröffentlichungen

Autonomes Fahren: Profactor prescht vor

Autoren: Leo Schranzhofer
Veröffentlicht in: Volksblatt, 2021
Herausgeber: Oberösterreichische Media Data Vertriebs- und Verlags GmbH

Marelli, CEA-LETI in Tinker Project: See it at DVN Lidar Conference

Autoren: Thierry Mourier
Veröffentlicht in: DVN Lidar Conference Newsletter 2022, 2022
Herausgeber: Driving Vision News

Sensor packages for autonomous cars enabled by additive manufacturing

Autoren: Martina Chopart, MSc. – Amires s.r.o.; Dr Leo Schranzhofer – Profactor GmbH; Bernhard Polzinger – Robert Bosch GmbH; Emmanuel I. Stratakis PhD. – FORTH (Foundation for Research and Technolo gy - Hellas); Dr Maria Pervolaraki – FORTH (Foundation for Research and Technology - Hellas); Dr David Volk – Notion Systems
Veröffentlicht in: OPE Journal, Ausgabe 38, 2022
Herausgeber: Deutscher Fachverlag GmbH

Versatile use of LiDAR modules into Smart Corner and grille

Autoren: Frederic Chave
Veröffentlicht in: DVN Lidar Conference Newsletter, 2021
Herausgeber: Driving Vision News

3D Lidar-on-chip

Autoren: Martina Chopart, Pavel Kulha
Veröffentlicht in: PRO Flextronics, Ausgabe 1, 2024, Seite(n) 11
Herausgeber: M2N Media GmbH

Shrinking RADAR and LiDAR sensor packages – an introduction to TINKER

Autoren: Leo Schranzhofer
Veröffentlicht in: Chip Scale Review, Ausgabe Vol. 26, Nr. 1., 2022, Seite(n) 11-12
Herausgeber: Chip Scale Review

TINKER inkjet pilot line celebrates completion

Autoren: Martina Chopart, Pavel Kulha
Veröffentlicht in: OPE journal, Ausgabe 45, 2023, Seite(n) 18
Herausgeber: Deutscher Fachverlag GmbH

AugenundOhren für selbstfahrende Autos aus Steyr

Autoren: HANNES FEHRINGER
Veröffentlicht in: Steyrer Zeitung, 2021
Herausgeber: OÖ. Online GmbH & Co.KG.

Autonomfahren: Oberösterreich steigtt gtaufs Gas

Autoren: Ulrike Rubasch
Veröffentlicht in: OÖ Nachrichten, 2021
Herausgeber: OÖ Nachrichten

UV Nanoimprint Lithography—Impact of Coating Techniques on Pattern Quality (öffnet in neuem Fenster)

Autoren: Johanna Rimböck, Patrick Schuster, Lisa Vsetecka, Christine Thanner
Veröffentlicht in: Nanomanufacturing, Ausgabe 4, 2024, Seite(n) 69-80, ISSN 2673-687X
Herausgeber: MDPI
DOI: 10.3390/nanomanufacturing4010005

Deep learning for zero-defect inkjet-printing of electronics (öffnet in neuem Fenster)

Autoren: Flaig Minnette, Zambal Sebastian
Veröffentlicht in: 2021 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT), 2022, Seite(n) 458-463
Herausgeber: IEEE
DOI: 10.1109/metroind4.0iot51437.2021.9488493

Direct patterning of functional materials using nanoimprint lithography (öffnet in neuem Fenster)

Autoren: Michael J. Haslinger, Sonja Kopp, Voktorija Jonaityte, Amiya Moharana, Helene Außerhuber, Michael Mühlberger
Veröffentlicht in: 38th European Mask and Lithography Conference (EMLC 2023), 2023
Herausgeber: SPIE
DOI: 10.1117/12.2674052

Error Compensation of Inkjet-printed Electronics using Incremental Learning and Knowledge Distillation (öffnet in neuem Fenster)

Autoren: Abdalla Shahin
Veröffentlicht in: 2024 International Conference on Artificial Intelligence, Computer, Data Sciences and Applications (ACDSA), 2024
Herausgeber: IEEE
DOI: 10.1109/acdsa59508.2024.10467896

Feedback Error Compensation of Inkjet-Printed ElectronicsUsing Incremental Learning and Knowledge DistillationMethods

Autoren: Abdalla Saber Ali Shahin
Veröffentlicht in: 2023
Herausgeber: Alpen-Adria-Universität Klagenfurt

Rechte des geistigen Eigentums

MEASURING DEVICE BASED ON A COMBINATION OF OPTICAL 2D AND 3D IMAGE CAPTURING METHODS

Antrags-/Publikationsnummer: 20 23053349
Datum: 2023-04-03
Antragsteller: BESI AUSTRIA GMBH

Messvorrichtung basierend auf kombinierter optischer 2D- und 3D-Bilderfassungsverfahren, Fertigungssystem und Inspektionssystem

Antrags-/Publikationsnummer: 10 2022107897
Datum: 2022-04-01
Antragsteller: BESI AUSTRIA GMBH

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor

Mein Booklet 0 0