Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS
Inhalt archiviert am 2024-05-29

Development of Low Stress No Distortion Welding for Industrial Applications.

Ziel

Current methods of fabrication involving welding usually result in significant welding distortion problems. Thin walled structures are particularly susceptible in the automotive, shipbuilding and aerospace industries. The cost and time required correcting for distortions can be significant (for example in Europe annual estimates are in excess of 100M). This results in reduced competitiveness and the creation of uneconomic designs, which are produced to compensate for anticipated distortions.

Low Stress No Distortion (LSND) welding is currently a laboratory based technique for eliminating buckling distortions and reducing tensile residual stresses. It involves local cooling behind the welding torch restricting shrinkage of the weld. The benefits of using LSND include: elimination of rework, reduced fabrication costs, improved joint properties, lower residual stresses, increased manufacturability of lightweight components and a reduction in scrap and recycling requirements. Although highly advantageous, LSND has not been fully exploited, due to practical difficulties associated with process parameter optimisation and shielding of the cooling gas.

The objective of this project is to conduct further research in LSND welding with the help of a research Fellow from China. The Fellow will conduct fundamental scientific research to address issues associated with industrialisation of the LSND technique.

The project will involve training the Fellow in aspects related to the simulation of the welding process where there is local cooling from CO2 gas. The Fellow will also be trained in aspects of advanced welding equipment prototype manufacture by developing components of an industrial LSND device. The Fellow will also develop a novel shield for preventing cooling gases from contaminating the weld. LSND is already being conducted in the Third country by the Fellow and as such the host institution will develop new skills in LSND welding as a result of this Fellowship.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Thema/Themen

Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.

Aufforderung zur Vorschlagseinreichung

Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.

FP6-2004-MOBILITY-7
Andere Projekte für diesen Aufruf anzeigen

Finanzierungsplan

Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.

IIF - Marie Curie actions-Incoming International Fellowships

Koordinator

BEIJING AERONAUTICAL MANUFACTURING TECHNOLOGY RESEARCH INSTITUTE (BAMTRI)
EU-Beitrag
Keine Daten
Gesamtkosten

Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.

Keine Daten
Mein Booklet 0 0