Obiettivo
The aim of this project is the development of new permanent magnet film based devices which could be used in micro-motors, micro-generators, sensors and read heads and help to significantly reduce the size, weight, and cost of these devices. The proposal focuses first on the development of nanostructured magnetic materials with low temperature processes compatible with microelectronics environment. The second aim of the project is to develop processes for small hard magnetic element fabrication down to sumicron sizes which can be used inconventional clean room facilities and at low temperature. Manufacturing aspects of permanent magnets films as well as the modelling, realization and evaluation of new miniaturised devices which will incorporate these small permanent magnets are included in this project.
Objectives:
1. A mastering of the growth of permanent magnet films at low temperature using both conventional and wholly novel deposition technologies;
2. Mastering of small permanent magnets fabrication and characterisation with sizes down to submicron;
3. Explore new etching technologies for thick permanent magnet films;
4. Development of modelling tools for permanent magnet based devices;
5. Production of four microsystems using permanent magnet films instead of normal size magnets. The four devices will be characterised fully through modelling and measurement on adapted test benches. These devices are a GMR sensor, a micro generator, a micromotor and a micro switch.
Work description:
The work is separated into two main parts.
I The mastering of the growth and patterning of thin and thick permanent magnet films. Standard operating procedures will be defined by the industrial partners by the beginning of the work. Films will be deposited using various techniques compatible with industrial processes (low cost and low temperature deposition). These films will be first characterised and after patterned in small permanent magnet with various shapes and sizes. The stability and magnetic properties of these small magnets will be investigated as function of size, material and deposition conditions. The results will be analysed with the help of micromagnetic calculations and 3D flux.
II The building of the demonstrators. Study of the commercial market and production possibilities:
- Standard operation procedures definition;
- Modelling of magnetic fields produced in heterogeneous structures by Films Permanent Magnets;
- Dimensioning of different demonstrators and selection of those to be built;
- Study of the technological steps by using microelectronic means as for example deposition techniques (evaporation, sputtering, electrochemical and vapour deposition) in order to obtain insulating and metallic thin film materials;
- UV lithography means for microstructure patterning, etching techniques (ion milling, reactive ion etching, OE) and planarisation techniques (mechanical or chemico-mechanical processes);
- mounting and testing of the demonstrator.
Milestones:
The major milestones are: Thin films with optimised deposition procedure and magnetic properties, production of small magnets with enough good properties, Midterm assessment, Thick films deposition and etching. Demonstrators provided.
The expected results are: A mastering of the growth of permanent magnet films, Modelling tools for permanent magnet based devices, Demonstrators fabrication patenting, A workshop.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- ingegneria e tecnologia ingegneria dei materiali rivestimenti e pellicole
- ingegneria e tecnologia ingegneria elettrica, ingegneria elettronica, ingegneria informatica ingegneria elettronica sensori
- scienze naturali scienze fisiche elettromagnetismo ed elettronica microelettronica
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
75752 PARIS CEDEX 15
Francia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.