Development of a multipurpose heat pump for domestic application

Informazioni relative al progetto

ID dell’accordo di sovvenzione: JOU20453

Progetto chiuso

Data di avvio 1 Gennaio 1995

Data di completamento 31 Dicembre 1996

Finanziato da

• Specific research and technological development programme (EEC) in the field of non-nuclear energy, 1990-1994

Costo totale Nessun dato

Contributo UE Nessun dato

Coordinato da

Katholieke Universiteit Leuven
Belgium

Obiettivo

This proposal aims at the development of small heat pumps intended for heating, cooling and sanitary hot water production in single family dwellings located in moderate climates. The heat pumps to be developed are of the single stage compression type allowing to operate in the following modes :
- space cooling and sanitary hot water production
- space cooling and heat rejection to the environment
- space heating with heat extraction from the environment (or from ventilated air)
Outdoor air temperatures will be limited to -5°C during winter. The heating capacity will be in the range of 1 to 5 kW.
The work programme consists of the following elements :
- analysis of overall performance data for the operating modes listed above, taking into account meteorological conditions, and aimed at the determination of the optimal heating and cooling power levels - identification of optimal environmentally acceptable working fluid and cycle calculations
- design of a first generation prototype heat pump
- construction and performance evaluation of the heat pump
- design, construction and performance evaluation of an optimized second generation prototype.
The detailed calculation of the heat exchangers will be based upon the experience of the proposers in the field of heat transfer and thermodynamics.
For the design of the whole heat pump use will be made of computer aided design techniques allowing three dimensional analysis of the component assembly.
The performance evaluation will take into account effects of external operating conditions (temperatures), transient behaviour etc... upon power levels and COP. Also the noice level of the heat pump will be evaluated. The capacity control of the heat pump will be achieved by means of expansion valves possibly of the electronic type. The advantages of the use of compressor speed control will be investigated taking into account the costs involved.

Campo scientifico

• natural sciences › physical sciences › thermodynamics

Programma(i)

• FP3-JOULE 2 - Specific research and technological development programme (EEC) in the field of non-nuclear energy, 1990-1994

Argomento(i)

• 040202 - Buildings

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

Katholieke Universiteit Leuven

• Contributo UE: Nessun dato
• Indirizzo: 300 A,Celestijnenlaan 300 A ; 3001 Heverlee ; Belgio
• Costo totale: Nessun dato

Partecipanti (2)

Actividades Tecnicas Industrais Lda.

Portogallo

• Contributo UE: Nessun dato
• Indirizzo: Capa Rota ; 2710 Sintra
• Costo totale: Nessun dato

Kungliga Tekniska Högskolan

Svezia

• Contributo UE: Nessun dato
• Indirizzo: 60,Brinellvägen 60 ; 100 44 Stockholm
• Costo totale: Nessun dato